Jandy Pro Series PSB220 Pool and Spa Air Blower

Invoering

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Jandy Pro Series PSB220 Pool and Spa Air Blower. The PSB220 is designed to provide powerful and quiet aeration for your pool or spa, enhancing your aquatic experience. Please read this manual thoroughly before attempting any installation or operation.

Veiligheidsinformatie

WAARSCHUWING: Risico op elektrische schok of elektrocutie.

• Alle elektrische bedrading moet worden aangelegd door een gekwalificeerde elektricien en voldoen aan alle lokale en nationale elektrische voorschriften.
• Ensure the power supply is disconnected at the circuit breaker before performing any service or maintenance.
• This blower is equipped with a thermally protected motor which automatically shuts off under excessive operating heat. Allow 30 minutes for blower cooling and restart.
• Only use copper conductors for wiring connections.
• Do not operate the blower if it has been submerged in water.
• Houd handen, haar en losse kleding uit de buurt van bewegende delen.

Producteigenschappen

• Ultrastille werking: Engineered for a more peaceful backyard experience.
• Krachtige prestaties: Features a 2.0 HP motor for effective aeration.
• Deeltage: Operates on 240 volts.
• Preventie van waterschade: Built-in check valves prevent water from damaging the blower motor.
• Eenvoudige installatie: Designed for easy bottom mount installation with an included wall bracket.
• Gebruik binnen/buiten: Geschikt voor zowel binnen- als buiteninstallaties.

Instellen en installeren

Proper installation is crucial for the performance and longevity of your Jandy PSB220 blower. It is recommended that installation be performed by a licensed professional to ensure compliance with all safety standards and to maintain product warranty.

1. Montage locatie: Select a suitable location for the blower. The unit is designed for bottom mount installation and includes a wall bracket for secure attachment. Ensure the location allows for proper ventilation and access for maintenance.
2. Veilige montage: Use the provided wall bracket to securely fasten the blower to a stable surface. The bottom of the unit is marked "FASTEN HERE" to indicate the mounting point.

Afbeelding 1: Bodem view of the Jandy PSB220 blower, highlighting the "FASTEN HERE" marking for secure installation.
3. Elektrische aansluiting: Connect the blower to a 240V power supply. Ensure all wiring is done with copper conductors and adheres to local electrical codes. The internal wiring connections are accessible for professional installation.


Figuur 2: View of the internal wiring compartment of the Jandy PSB220 blower, showing blue and green wires for electrical connection.

4. Loodgietersaansluiting: Connect the blower to your pool or spa's air line. The built-in check valves will prevent water from entering the motor.
5. Laatste controle: Before restoring power, double-check all connections to ensure they are secure and correctly installed.

Figuur 3: Voorzijde view of the Jandy PSB220 Pro Series Pool and Spa Air Blower, showing the product label.

Figuur 4: Zijkant view of the Jandy PSB220 Pro Series Pool and Spa Air Blower, illustrating its compact design.

Figure 5: Close-up of the Jandy PSB220 product label, displaying model number, serial number, peak HP, voltage, en amptijdperk.

Gebruiksaanwijzing

The Jandy PSB220 blower is designed for straightforward operation once properly installed.

1. Inschakelen: Restore power to the blower at the circuit breaker.
2. Activering: The blower can be activated via your pool/spa control system or a dedicated switch, depending on your setup.
3. Beluchting: The blower will begin to push air into your pool or spa, creating bubbles and enhancing water circulation. This can be particularly useful for cooling down pool water in hot climates.
4. Thermische bescherming: In case of excessive heat, the motor's thermal protection will activate, shutting off the unit. If this occurs, allow the blower to cool for at least 30 minutes before attempting to restart it.

Onderhoud

The Jandy PSB220 is designed for minimal maintenance. Regular checks can help ensure its longevity and optimal performance.

• Blijf vrij: Ensure the area around the blower is free from debris, leaves, and other obstructions that could impede airflow or cause overheating.
• Controleer de bedrading: Periodically check electrical connections for any signs of wear, corrosion, or looseness. Ensure power is off before inspection.
• Schone buitenkant: Veeg de buitenkant van de blazer af met een adamp cloth to remove dirt and dust. Do not use harsh chemicals or abrasive cleaners.
• Luister naar ongebruikelijke geluiden: If you notice any unusual noises or vibrations during operation, disconnect power and consult a qualified technician.

Probleemoplossing

Specificaties

Garantie-informatie

Jandy products are manufactured to high standards and come with a limited warranty. Please note that for the warranty to be valid, installation of the PSB220 blower must be performed by a licensed professional. Self-installation may void the manufacturer's warranty. Refer to the official Jandy warranty documentation for complete terms and conditions.

Steun

For technical assistance, replacement parts, or warranty claims, please contact Jandy customer support or visit their official webwebsite:

• Webwebsite: www.jandy.com
• Telefoon: 1-800-822-7933
• Adres: Zodiac Pool Systems, Inc., 2620 Commerce Way, Vista, CA 92081