ELECOM HUGE Wireless Trackball Mouse M-HT1DRBK User Manual

1. Inleiding

This manual provides instructions for the proper setup, operation, and maintenance of your ELECOM HUGE Wireless Trackball Mouse (Model: M-HT1DRBK). Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

2. Wat zit er in de doos?

• ELECOM HUGE Wireless Trackball Mouse
• USB-ontvanger
• AA-batterij (x2)
• Gebruikershandleiding (dit document)

3. Instellen

3.1. Batterij installatie

1. Het batterijcompartiment bevindt zich aan de onderkant van de trackballmuis.
2. Open het batterijklepje.
3. Plaats de twee AA-batterijen en let daarbij op de juiste polariteit (+/-).
4. Sluit het batterijklepje goed.

3.2. Aansluiting van de USB-ontvanger

The USB receiver is stored within the trackball mouse for convenience during transport.

1. Remove the USB receiver from its storage slot on the underside of the trackball mouse.
2. Plug the USB receiver into an available USB port on your computer (PC or Mac).
3. Turn on the trackball mouse using the power switch located on the underside. The mouse should be automatically recognized by your operating system.

Figuur 1: Inserting the USB receiver into the storage slot on the underside of the trackball mouse.

3.3. Software Installation (Mouse Assistant)

For full customization of the 8 programmable buttons and advanced features, it is recommended to install the ELECOM Mouse Assistant software.

1. Bezoek de officiële ELECOM-website. webplaats.
2. Navigate to the 'Support' or 'Downloads' section and locate 'Mouse Assistant'.
3. Download the appropriate version for your operating system (Windows or macOS).
4. Volg de instructies op het scherm om de installatie te voltooien.

Figuur 2: Example of the ELECOM Mouse Assistant software interface for button customization.

4. Gebruiksaanwijzing

4.1. Basic Cursor Control

The ELECOM HUGE trackball is designed for index finger control, providing precise cursor movement. Use your index finger to roll the 52mm trackball to move the cursor on the screen.

Figuur 3: Demonstrating index finger control for precise cursor movement.

4.2. DPI-aanpassing

The trackball features a DPI button to adjust cursor speed. You can switch between three DPI settings: 500 (LOW), 1000 (MID), and 1500 (HIGH) DPI. Press the DPI button to cycle through these settings and find your preferred cursor speed.

4.3. Programmeerbare knoppen

The trackball is equipped with 8 physical buttons, including the scroll wheel with tilt functionality. These buttons can be customized using the ELECOM Mouse Assistant software to perform various functions, such as application shortcuts, media controls, or custom macros.

Figuur 4: Overview of the 8 programmable buttons and their locations.

4.4. Ergonomic Design and Palm Rest

The trackball features an ergonomic angled design and a large, soft palm rest to support your hand and wrist in a natural position, promoting comfort during extended use.

Figuur 5: The soft rubber palm support integrated into the trackball design.

5. Onderhoud

5.1. Trackball Cleaning

To maintain smooth operation, periodically clean the 52mm trackball and its ruby bearings. Dust and debris can accumulate and affect performance.

1. Schakel de trackballmuis uit.
2. Locate the ball removal hole on the underside of the device.
3. Duw de trackball voorzichtig door dit gat naar buiten.
4. Veeg de trackball schoon met een zachte, pluisvrije doek.
5. Clean the three ruby ball bearings and the inside of the trackball housing with a cotton swab or a soft brush to remove any dust or debris.
6. Reinsert the trackball into the housing until it clicks into place.

Figuur 6: Illustration of the smooth ruby bearings and the trackball removal process.

6. Probleemoplossing

6.1. Cursor Not Moving or Erratic

• Controleer de batterijen: Ensure batteries are correctly installed and have sufficient charge. Replace if necessary. The trackball has a battery remaining light lamp.
• Controleer USB-ontvanger: Controleer of de USB-ontvanger goed is aangesloten op een werkende USB-poort. Probeer een andere USB-poort.
• Schone trackball: Refer to Section 5.1 for instructions on cleaning the trackball and bearings.
• Interferentie: Move the trackball closer to the USB receiver or away from other wireless devices that might cause interference.

6.2. Knoppen reageren niet

• Softwarecontrole: If using custom button assignments, ensure the ELECOM Mouse Assistant software is running and configured correctly.
• Apparaat opnieuw koppelen: In rare cases, re-pairing the device with the USB receiver might resolve the issue. Consult the ELECOM support webwebsite voor specifieke instructies.

7. Specificaties

8. Garantie en ondersteuning

ELECOM products are designed for reliability and performance. For warranty information, technical support, or to download the latest software and drivers, please visit the official ELECOM website or contact ELECOM customer service.

Official ELECOM Webwebsite: https://www.elecom.co.jp/global/