Gebruikershandleiding voor de Fluke 15B+ digitale multimeter

1. Overview

The Fluke 15B+ Digital Multimeter is a rugged, reliable, and accurate tool designed for various electrical applications. It offers essential measurement capabilities in a user-friendly design, suitable for both professional and serious DIY users.

Afbeelding: Voorzijde view of the Fluke 15B+ Digital Multimeter, showing the display, rotary dial, and input jacks.

Belangrijkste kenmerken:

• Veiligheidsclassificatie CAT III 600V: Ensures safety for electrical systems in residential and commercial settings.
• AC/DC-voltage Measurement up to 1000V: Meet zowel AC- als DC-voltage for a wide range of applications.
• AC/DC Current Measurement up to 10A: Accurately measures AC and DC current for diagnosing electrical issues.
• Meerdere meetfuncties: Inclusief voltage, Resistance, Continuity, Diode, and Capacitance.
• Input Terminal for AC/DC Current Measurements: Dedicated input for current measurements up to 10A.

2. Veiligheidsinformatie

Always adhere to safety precautions when using any electrical testing equipment. Failure to do so may result in injury or damage to the meter or equipment under test.

• Lees de instructies: Read and understand all instructions and safety information before use.
• Correct gebruik: Use the multimeter only as specified in this manual; otherwise, the protection provided by the multimeter might be impaired.
• Nominaal voltage: Breng niet meer aan dan de aangegeven hoeveelheidtage, zoals aangegeven op de multimeter, tussen de aansluitingen of tussen een willekeurige aansluiting en de aarde.
• Inspect Leads: Inspect test leads for damaged insulation or exposed metal. Replace damaged leads.
• Avoid Live Circuits: Do not use the multimeter on live circuits with exposed conductors or bus bars.
• Persoonlijke beschermingsmiddelen (PBM): Always wear appropriate personal protective equipment, such as safety glasses and insulated gloves, when working with electrical systems.
• CAT III 600V: This meter is rated for CAT III 600V. Do not use it in environments exceeding this rating.

3. Wat zit er in de doos?

Your Fluke 15B+ Digital Multimeter package includes the following items:

• Fluke 15B+ Digital Multimeter
• TL75 Test Leads
• 2 AA-batterijen (vooraf geïnstalleerd of apart meegeleverd)

Image: The Fluke 15B+ Digital Multimeter shown alongside its red and black TL75 test leads and protective caps.

4. Instellen

4.1 Batterij installatie

The Fluke 15B+ requires two AA batteries for operation. These are typically included with your purchase.

1. Zorg ervoor dat de multimeter is uitgeschakeld.
2. Zoek het klepje van het batterijcompartiment aan de achterkant van de multimeter.
3. Draai de schroef/schroeven los waarmee de kap vastzit.
4. Remove the cover and insert the two AA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
5. Replace the battery compartment cover and tighten the screw(s).

4.2 Testkabels aansluiten

Een correcte aansluiting van de meetsnoeren is cruciaal voor nauwkeurige en veilige metingen.

1. Plaats de zwart testleiding in de COM (standaard) ingangsaansluiting.
2. Voor de meeste voltage, resistance, continuity, diode, and capacitance measurements, insert the rood testleiding in de VΩHzCAP ingangsaansluiting.
3. For current measurements (mA/A), insert the rood test lead into the appropriate current input jack (e.g., mA/A or 10A FUSED), depending on the expected current level. Refer to the multimeter's faceplate for specific jack labels.

5. Gebruiksaanwijzing

5.1 Algemene werking

1. Aan/uit: Rotate the central dial from the OFF position to any desired measurement function to turn the meter on. Rotate back to OFF to power off.
2. Functie Selectie: Use the central rotary dial to select the desired measurement function (e.g., V~ for AC Voltage, V- voor DC Voltage, Ω voor Weerstand).
3. Bereikknop: Druk op de RANGE button to manually select a measurement range if auto-ranging is not desired. Press again to cycle through ranges or hold to return to auto-ranging.
4. Pauzeknop: Druk op de UITSTEL Knop om de huidige waarde op het display te bevriezen. Druk nogmaals om los te laten.
5. Achtergrondverlichtingsknop: Press the backlight button (sun icon) to illuminate the display in low-light conditions.

Image: A gloved hand holding the Fluke 15B+ Digital Multimeter, demonstrating its ergonomic design.

5.2 Meetfuncties

5.2.1 AC/DC-voltage Meting

1. Draai de draaiknop naar V~ (AC Voltage) of V- (DC-deeltagen).
2. Connect the black test lead to the COM terminal and the red test lead to the VΩHzCAP terminal.
3. Carefully touch the test probes to the points where voltage is to be measured (in parallel with the circuit).
4. Lees het deeltage-waarde op het display.

5.2.2 AC/DC-stroommeting

Voorzichtigheid: Always ensure the circuit is de-energized before connecting the multimeter in series for current measurements. Incorrect connection can blow the fuse or damage the meter.

1. Draai de draaiknop naar A~ (wisselstroom) of A- (DC Current).
2. Sluit het zwarte testsnoer aan op de COM-terminal.
3. For currents up to 400mA, connect the red test lead to the mA/A terminal. For currents up to 10A, connect the red test lead to the 10A FUSED terminal.
4. Onderbreek de stroomkring waar de stroom gemeten moet worden en sluit de multimeter in serie aan.
5. Re-energize the circuit and read the current value on the display.

Image: The Fluke 15B+ Digital Multimeter connected to an electrical panel, displaying a voltage lezen.

5.2.3 Weerstandsmeting

1. Draai de draaiknop naar Ω (Resistance).
2. Connect the black test lead to COM and the red test lead to VΩHzCAP.
3. Ensure the component or circuit under test is de-energized.
4. Touch the test probes across the component or circuit.
5. Lees de weerstandswaarde af op het display.

5.2.4 Continuïteitstest

1. Draai de draaiknop naar de Continuïteit symbol (looks like a sound wave).
2. Connect the black test lead to COM and the red test lead to VΩHzCAP.
3. Zorg ervoor dat het te testen circuit spanningsloos is.
4. Touch the test probes across the points to be tested.
5. The meter will beep if a continuous path (low resistance) is detected. The display will show the resistance value.

5.2.5 Diodetest

1. Draai de draaiknop naar de Diode symbol (looks like an arrow with a bar).
2. Connect the black test lead to COM and the red test lead to VΩHzCAP.
3. Zorg ervoor dat de diode losgekoppeld is van het circuit.
4. Touch the red probe to the anode and the black probe to the cathode. A forward voltagDe spanningsval (bijvoorbeeld 0.5V tot 0.8V voor siliciumdiodes) moet worden weergegeven.
5. Reverse the probes. The display should show OL (Open Loop) for a good diode.

5.2.6 Capaciteitsmeting

1. Draai de draaiknop naar de Capaciteit symbol (looks like two parallel lines).
2. Connect the black test lead to COM and the red test lead to VΩHzCAP.
3. Zorg ervoor dat de condensator volledig ontladen is voordat u gaat testen.
4. Touch the test probes across the capacitor terminals.
5. Lees de capaciteitswaarde af op het display.

Image: A technician wearing safety gear, using the Fluke 15B+ Digital Multimeter to take a reading inside an electrical panel.

6. Onderhoud

6.1 Reinigen

Om de multimeter schoon te maken, veegt u de behuizing schoon met een doekje.amp Een doek en een mild reinigingsmiddel. Gebruik geen schuurmiddelen of oplosmiddelen. Zorg ervoor dat de meter volledig droog is voor gebruik.

6.2 Batterij vervangen

Replace the batteries when the low battery indicator appears on the display. Refer to Section 4.1 for battery installation instructions.

6.3 Zekering vervangen

If the current measurement function stops working, the fuse may need replacement. Always replace with a fuse of the specified type and rating to maintain safety and performance.

1. Ensure the multimeter is turned OFF and test leads are disconnected.
2. Open het klepje van het batterijcompartiment zoals beschreven in paragraaf 4.1.
3. Verwijder voorzichtig de oude zekering.
4. Install a new fuse of the correct type and rating (refer to the specifications section or the meter's internal markings).
5. Replace the battery compartment cover and tighten the screw(s).

7. Probleemoplossing

• Geen scherm: Controleer of de accu goed geplaatst en opgeladen is. Vervang de accu's indien nodig.
• Onjuiste metingen: Ensure test leads are correctly connected to the appropriate input jacks for the selected function. Verify the rotary dial is set to the correct measurement function. Check for damaged test leads.
• Huidige meting werkt niet: Check the fuse. Replace if blown (refer to Section 6.3). Ensure the red test lead is in the correct current input jack.
• "OL"-weergave: This typically means "Overload" or "Open Loop." For resistance, it indicates an open circuit. For diode test, it indicates a reverse-biased good diode. For voltage/current, it means the measured value exceeds the selected range (if not in auto-range) or the meter's maximum capability.

8. Specificaties

9. Garantie en ondersteuning

The Fluke 15B+ Digital Multimeter is manufactured by Fluke Corporation. For detailed warranty information, technical support, or service, please refer to the official Fluke website or contact their customer service directly. Always ensure you purchase from authorized distributors to guarantee product authenticity and valid warranty coverage.

Voor aanvullende bronnen en productinformatie kunt u terecht op de Fluke Store on Amazon.