Chevron Cetus PAO 46 Air Compressor Oil Lubricant Instruction Manual

1. Inleiding

This manual provides essential instructions for the safe and effective use, storage, and handling of Chevron Cetus PAO 46, a premium synthetic air compressor oil lubricant. Cetus PAO 46 is designed to deliver superior performance in various air compressor applications, offering extended drain intervals and protection against wear, rust, and oxidation.

Lees deze handleiding aandachtig door voordat u het product gebruikt, om optimale prestaties en veiligheid te garanderen.

2. Veiligheidsinformatie

Handling industrial lubricants requires adherence to safety protocols. Always consult the Safety Data Sheet (SDS) for comprehensive safety information specific to Chevron Cetus PAO 46. The SDS provides details on potential hazards, first aid measures, fire-fighting procedures, accidental release measures, handling and storage, exposure controls, and personal protection.

• Persoonlijke beschermingsmiddelen (PBM): Always wear appropriate PPE, including safety glasses or goggles, chemical-resistant gloves, and protective clothing, when handling the lubricant.
• Ventilatie: Ensure adequate ventilation in areas where the lubricant is handled or stored.
• Huidcontact: Avoid prolonged or repeated skin contact. Wash thoroughly with soap and water after handling.
• Oogcontact: In case of contact, flush eyes immediately with large amounts of water for at least 15 minutes. Seek medical attention if irritation persists.
• Inname: Niet inslikken. Bij inslikken, niet laten braken. Direct medische hulp inroepen.
• Brandgevaar: This product is combustible. Keep away from open flames, sparks, and hot surfaces. Use appropriate fire extinguishers (e.g., foam, dry chemical, CO2).

3. Opslag en behandeling

Proper storage and handling are crucial for maintaining product quality and ensuring safety.

Image 1: A 55-gallon drum containing Chevron Cetus PAO 46 lubricant. The drum is blue with the Chevron brand logo in the center, indicating the product's origin and type.

• Opslagcondities: Store the 55-gallon drum in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and incompatible materials.
• Containerintegriteit: Keep the drum tightly closed when not in use to prevent contamination and evaporation.
• Preventie van morsen: Store drums on secondary containment pallets to prevent environmental contamination in case of leaks or spills.
• Tillen en verplaatsen: Use appropriate lifting equipment (e.g., drum dollies, forklifts) when moving the 55-gallon drum to prevent injury and damage.
• Etikettering: Ensure all containers are clearly labeled with product identification and hazard warnings.

4. Opzetten en voorbereiden

Before introducing Chevron Cetus PAO 46 into an air compressor system, proper preparation is essential.

1. Review Compressor Manual: Always refer to the air compressor manufacturer's instruction manual for specific lubricant requirements and change procedures.
2. Afsluiten van het systeem: Ensure the air compressor is completely shut down, depressurized, and locked out/tagged out to prevent accidental startup.
3. Drain Old Lubricant: Completely drain the existing lubricant from the compressor system, including the sump, oil cooler, and separator. Dispose of used oil according to local regulations.
4. Filter vervangen: Replace all oil filters and air/oil separators as recommended by the compressor manufacturer.
5. System Flush (if necessary): If switching from a different type of lubricant (e.g., mineral oil to synthetic), a system flush may be required to prevent incompatibility issues. Consult Chevron technical support or the compressor manufacturer for guidance.

5. Operating (Lubricant Application)

Follow these steps for filling the air compressor with Chevron Cetus PAO 46.

1. Fill Compressor: Carefully pour Chevron Cetus PAO 46 into the compressor's oil fill port, using a clean funnel to prevent contamination.
2. Controleer niveau: Fill to the recommended level indicated by the compressor's sight glass or dipstick. Do not overfill.
3. Eerste run: Start the compressor and allow it to run for a short period (e.g., 15-30 minutes) to circulate the new lubricant.
4. Re-check Level: Shut down the compressor, allow the oil to settle, and re-check the lubricant level. Top up if necessary.
5. Prestaties bewaken: During initial operation, monitor the compressor for any unusual noises, temperatures, or pressure readings.

6. Onderhoud

Regular maintenance ensures the longevity and efficiency of your air compressor and the lubricant.

• Lubricant Analysis: Periodically conduct oil analysis to monitor the condition of the lubricant and the compressor. This can help determine optimal drain intervals and detect potential issues early.
• Drain Intervals: Chevron Cetus PAO 46 offers extended drain intervals compared to conventional mineral oils. Follow the compressor manufacturer's recommendations or adjust based on oil analysis results.
• Filter Changes: Adhere to the compressor manufacturer's schedule for replacing oil filters and air/oil separators.
• Systeemzuiverheid: Maintain a clean operating environment to prevent contaminants from entering the lubricant system.

7. Probleemoplossing

This section addresses common issues related to air compressor lubrication.

For issues not listed, consult your compressor manufacturer's manual or contact Chevron technical support.

8. Specificaties

Key specifications for Chevron Cetus PAO 46 lubricant.

• Merk: Chevron
• Productnaam: Cetus PAO 46
• Materiaal: Synthetisch
• Vloeistofvolume: 55 Gallons (7040.0 Fluid Ounces)
• Aanbevolen toepassingen: Lubricant for Air Compressors
• Specifieke toepassingen: Lubricate Air Compressors, Prevent Corrosion
• Itemvorm: Olie
• SAE J300 Viscosity Grade: 50
• UPC-nummer: 023968381431

9. Informatie over verwijdering

Used lubricants must be disposed of responsibly and in accordance with all local, state, and federal environmental regulations. Do not discharge into drains, soil, or watercourses. Contact a licensed waste management company for proper disposal or recycling of used oil and contaminated materials.

10. Garantie en ondersteuning

For specific warranty information regarding Chevron Cetus PAO 46, please refer to the official Chevron product documentation or contact Chevron customer service directly. Technical support and further assistance can be obtained through authorized Chevron distributors or by visiting the official Chevron webplaats.

Note: This manual provides general guidelines. Always prioritize the safety data sheet (SDS) and specific equipment manufacturer's recommendations.