WORX WX082L 4V ZipSnip draadloze elektrische schaar Gebruikershandleiding

Invoering

The WORX WX082L 4V ZipSnip Cordless Electric Scissors are designed for effortless cutting of various materials, reducing hand strain compared to traditional scissors. This manual provides essential information for safe and effective use, maintenance, and troubleshooting of your new tool.

Veiligheidsinformatie

• Always ensure the tool is switched off and the safety lock is engaged when not in use or during maintenance.
• Keep hands and fingers away from the rotating blade during operation.
• Wear appropriate personal protective equipment, such as cut-resistant gloves, especially when handling or replacing the blade.
• Do not attempt to cut materials beyond the tool's specified capacity.
• Keep the tool dry and away from moisture.

Inhoud van het pakket

Controleer of alle artikelen in uw pakket aanwezig zijn:

• WORX WX082L 4V ZipSnip draadloze elektrische schaar
• Cutting blade (pre-installed)
• Oplader

Product voorbijview

Familiarize yourself with the components of your ZipSnip tool:

1. Snijmes: The rotating blade for cutting materials.
2. Mesbeschermer: Provides protection and guides the blade along the cutting surface.
3. Trekker: Activates the cutting blade when pressed.
4. Lock-out Switch: A safety mechanism that must be engaged before the trigger can activate the blade.
5. Oplaadpoort: Connects the charger to the tool.
6. Batterij-indicatielampje: Geeft het huidige batterijniveau weer.

Instellen

De batterij opladen

The WORX WX082L is equipped with an internal 4V MaxLithium battery. Before first use, or when the battery indicator shows low charge, fully charge the tool.

1. Zorg ervoor dat het gereedschap is uitgeschakeld.
2. Connect the included charger to the charging port on the tool (refer to Figure 4).
3. Sluit de oplader aan op een standaard stopcontact.
4. The battery indicator light will illuminate to show charging status. Charge until the indicator shows a full charge.
5. Zodra de oplader volledig is opgeladen, koppelt u deze los van het gereedschap en het stopcontact.

Gebruiksaanwijzing

Algemene werking

The ZipSnip is designed for cutting various materials such as cardboard, plastic packaging, fabric, leather, and more. Its compact design and lightweight nature (approximately 0.86 lbs) make it easy to maneuver.

1. Bereid het materiaal voor: Place the material to be cut on a stable, flat surface.
2. Pak het gereedschap vast: Hold the ZipSnip firmly with one hand, ensuring a comfortable and secure grip.
3. Veiligheid inschakelen: Press the lock-out switch (Figure 3) with your thumb.
4. Activate Blade: While holding the lock-out switch, press the trigger to start the rotating blade.
5. Begin met snijden: Guide the tool along the desired cutting line. The flat surface of the blade guard helps maintain a straight cut.
6. Uitgave: Release the trigger to stop the blade. The safety lock will automatically re-engage.

Het snijden van verschillende materialen

The ZipSnip is versatile and can handle various materials. For optimal results, ensure the material is laid flat and stable.

Onderhoud

Mes vervangen

Over time, the blade may become dull despite its self-sharpening feature. Replace the blade when cutting performance diminishes.

1. Ensure the tool is switched off and the safety lock is engaged.
2. Wear cut-proof gloves for safety.
3. Use a flat-head screwdriver to loosen the screw on the blade counterclockwise.
4. Verwijder voorzichtig het oude mes.
5. Align the new replacement blade with the electric scissors head hole.
6. Tighten the blade screw clockwise until secure.

Schoonmaak

After each use, clean the blade and surrounding area to remove any debris or material residue. Use a dry cloth or soft brush. Do not use harsh chemicals or abrasive materials.

Probleemoplossing

• Apparaat gaat niet aan: Ensure the battery is fully charged. Verify that both the lock-out switch and the trigger are pressed simultaneously.
• Slechte snijprestaties: The blade may be dull and require replacement. Check for any material buildup around the blade that might be obstructing its movement.
• Batterij laadt niet op: Ensure the charger is properly connected to both the tool and a working power outlet. Check the charger cable for damage.

Specificaties

Garantie en ondersteuning

The WORX WX082L 4V ZipSnip Cordless Electric Scissors come with a 3 jaar fabrieksgarantie.

For technical support, warranty claims, or to purchase replacement parts, please contact Worx customer service or visit their official website. Refer to your product packaging for specific contact details.