Invoering
This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your AEG SMT 355 Corded Electric Chop Saw. Please read this manual thoroughly before operating the tool to ensure safe and efficient use. Keep this manual for future reference.
The AEG SMT 355 is a powerful corded electric chop saw designed for cutting various materials including metal, stainless steel, and wood, with a maximum cutting depth of 115 mm.
Algemene veiligheidsinstructies
Neem altijd de basisveiligheidsmaatregelen in acht om het risico op brand, elektrische schokken en letsel te verminderen. Dit omvat, maar is niet beperkt tot:
- Draag geschikte persoonlijke beschermingsmiddelen (PBM), zoals een veiligheidsbril, gehoorbescherming en handschoenen.
- Zorg ervoor dat de werkplek schoon, goed verlicht en vrij van obstakels is.
- Houd kinderen en omstanders uit de buurt van het werkgebied.
- Gebruik geen elektrisch gereedschap in een explosieve omgeving, zoals in de aanwezigheid van ontvlambare vloeistoffen, gassen of stof.
- Haal altijd de stekker uit het stopcontact voordat u aanpassingen doorvoert, accessoires verwisselt of het gereedschap opbergt.
- Zet het werkstuk goed vast voordat u gaat zagen.
- Use only cutting wheels designed for the AEG SMT 355 and suitable for the material being cut.
Productcomponenten
Familiarize yourself with the main components of your AEG SMT 355 chop saw.
Figuur 1: Voorzijde view of the AEG SMT 355 Corded Electric Chop Saw, showing the cutting wheel, guard, handle, and base.
Afbeelding 2: Achter view of the AEG SMT 355 Corded Electric Chop Saw, highlighting the motor housing and power cord connection.
Figuur 3: Close-up view of the integrated vise and clamping mechanism on the AEG SMT 355, used for securing workpieces.
Opstelling en montage
- Uitpakken: Carefully remove the chop saw from its packaging. Inspect for any damage that may have occurred during shipping. Report any damage to your retailer immediately.
- Montage: For stability and safety, it is recommended to securely mount the chop saw to a workbench or a stable stand using appropriate fasteners. Ensure the mounting surface can support the weight of the tool and the forces generated during operation.
- Installatie van de messen (indien niet vooraf geïnstalleerd):
- Zorg ervoor dat het gereedschap losgekoppeld is van het stroomnet.
- Lift the blade guard.
- Druk op de spindelvergrendelingsknop om te voorkomen dat de spindel draait.
- Use the provided wrench to loosen and remove the blade retaining nut and outer flange.
- Place the new 355 mm cutting wheel onto the spindle, ensuring the rotation arrow on the blade matches the direction of rotation indicated on the saw.
- Reinstall the outer flange and blade retaining nut. Tighten securely with the wrench while holding the spindle lock.
- Laat de mesbeschermkap zakken.
- Vise Adjustment: The integrated vise can be adjusted to secure various workpiece sizes. Loosen the locking handle, slide the vise jaw to the desired position, and tighten the handle firmly to secure the workpiece.
Gebruiksaanwijzing
- Werkstukvoorbereiding:
- Ensure the workpiece is clean and free of debris.
- Mark the cutting line clearly.
- Place the workpiece firmly against the fence and secure it tightly with the vise mechanism. Ensure the workpiece is stable and will not shift during the cut.
- Stroomaansluiting: Connect the chop saw to a suitable power outlet (230V, 50Hz). Ensure the power circuit can handle the 2300 Watts power consumption.
- De zaag starten:
- Houd het handvat stevig vast.
- Press the trigger switch to start the motor. Allow the blade to reach full speed (3800 RPM) before beginning the cut.
- Een snede maken:
- Slowly and steadily lower the rotating blade into the workpiece. Do not force the cut; let the saw do the work.
- Maintain a consistent downward pressure.
- Once the cut is complete, release the trigger switch and allow the blade to stop rotating completely before raising the saw arm.
- De zaag stoppen: Release the trigger switch. The blade will stop rotating. Wait until the blade has completely stopped before moving the workpiece or making any adjustments.
Onderhoud
Regular maintenance ensures the longevity and safe operation of your chop saw.
- Schoonmaak: After each use, disconnect the power and clean the saw. Remove dust, chips, and debris from the motor vents, blade guard, and base using a brush or compressed air. Do not use solvents that could damage plastic parts.
- Bladinspectie: Regularly inspect the cutting wheel for wear, cracks, or damage. Replace worn or damaged blades immediately. Ensure the blade is always sharp and suitable for the material being cut.
- Vise and Clamp: Keep the vise mechanism clean and lubricated to ensure smooth operation.
- Stroomkabel: Inspect the power cord for any signs of damage, cuts, or fraying. If damaged, have it repaired by a qualified technician.
- Koolborstels: The motor's carbon brushes may need periodic inspection and replacement. Refer to a qualified service center for this procedure if you notice reduced power or excessive sparking.
- Opslag: Store the chop saw in a dry, secure location out of reach of children and unauthorized users.
Probleemoplossing
In dit gedeelte worden veelvoorkomende problemen besproken. Neem voor problemen die hier niet worden vermeld contact op met een gekwalificeerde servicemonteur.
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Zaag start niet | No power supply; Faulty power cord/plug; Defective switch; Overload protection tripped. | Check power connection and outlet; Inspect power cord; Contact service for switch replacement; Reset circuit breaker. |
| Overmatige trillingen of lawaai | Loose blade; Damaged blade; Loose mounting bolts; Worn bearings. | Tighten blade nut; Replace damaged blade; Tighten mounting bolts; Contact service for bearing replacement. |
| Slechte snijprestaties | Dull or incorrect blade; Incorrect cutting technique; Workpiece not secured. | Replace with sharp, appropriate blade; Apply steady, even pressure; Secure workpiece firmly. |
| Motor oververhit | Blocked ventilation slots; Overloading the motor; Continuous heavy use. | Clean ventilation slots; Reduce load; Allow motor to cool down. |
Technische specificaties
| Functie | Specificatie |
|---|---|
| Model | SMT-355 |
| Merk | AEG |
| Stroomverbruik | 2300 Watt |
| Geen laadsnelheid | 3800 toeren per minuut |
| Wheel/Blade Diameter | 355 mm (14 inch) |
| Maximale snijdiepte | 115mm |
| Bladmateriaal | Snelstaal |
| Oppervlakte aanbeveling | Metal, Stainless Steel, Wood |
| Energiebron | Elektrische kabel |
| Artikelgewicht | 16.5 pond (ongeveer 7.48 kg) |
| Handvat Materiaal | Rubber |
| Pakket afmetingen | 57.8x42.6x35.8cm |
Garantie en ondersteuning
Specific warranty terms and conditions for the AEG SMT 355 Corded Electric Chop Saw are typically provided with the product at the time of purchase or can be found on the official AEG website voor uw regio. Bewaar uw aankoopbewijs voor garantieclaims.
For technical support, service, or spare parts, please refer to the contact information provided by your retailer or visit the official AEG website for authorized service centers in your area. This manual does not contain specific contact details for support.
