1. Inleiding
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
Please read this manual thoroughly before using the device to ensure safe and efficient operation.
2. Veiligheidsinformatie
Neem de volgende veiligheidsmaatregelen in acht om letsel en schade aan het apparaat te voorkomen:
- Stel het apparaat niet bloot aan extreme temperaturen, vochtigheid of direct zonlicht.
- Avoid dropping the device or subjecting it to severe impacts.
- Probeer het apparaat niet te openen of te wijzigen. Laat alle onderhoudswerkzaamheden uitvoeren door gekwalificeerd personeel.
- Keep the scanning window clean to ensure optimal performance.
- Use only Datalogic-approved accessories and power supplies.
3. Inhoud van het pakket
Controleer of alle artikelen in het pakket aanwezig zijn:
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. Product voorbijview
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- Scanvenster: Emits the scan line and reads bar codes.
- Triggerknop: Activates the scanning process.
- Indicator-LED: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. Instellen
Follow these steps to set up your QW2100 Bar Code Reader:
- Sluit de kabel aan: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- Verbinding maken met hostapparaat:
- USB-interface: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- Inschakelen: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. Gebruiksaanwijzing
To scan a bar code with your QW2100 reader:
- Doel: Point the scanning window of the reader at the bar code you wish to scan.
- Activeren: Press and hold the trigger button. A bright scan line will project from the scanning window.
- Scannen: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- Bevestiging: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. Onderhoud
Proper maintenance ensures the longevity and performance of your bar code reader:
- Het scanvenster reinigen: Gebruik een zachte, pluisvrije doek dampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- Het schoonmaken van de Casing: Veeg de buitenkant afasing met een zachte, damp lap.
- Kabelinspectie: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Opslag: Bewaar de scanner, wanneer deze niet in gebruik is, op een schone, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
8. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Scanner gaat niet aan. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. Specificaties
| Functie | Detail |
|---|---|
| Modelnummer | QW2120-BK |
| Merk | Gegevenslogica |
| Connectiviteitstechnologie | USB Cable (also available in RS-232/Keyboard Wedge) |
| Energiebron | AC (via host device USB or external power supply for RS-232) |
| Scansnelheid | 400 scans/second |
| Productafmetingen (L x B x H) | 6.69 x 2.56 x 2.76 cm (17 x 6.5 x 7 inch) |
| Artikelgewicht | 4.2 ons |
| Kleur | Zwart |
| Ondersteunde symboliek | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. Garantie en ondersteuning
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic webplaats.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Webwebsite: www.datalogic.com
