1. Inleiding
This manual provides essential information for the safe and efficient use of your Gewiss GW30411 Electronic 2-Channel Programmer. Please read these instructions carefully before installation and operation, and retain them for future reference. The GW30411 is designed for precise control of electrical circuits over time.
2. Veiligheidsinformatie
WARNING: Risk of electric shock. Installation and maintenance should only be performed by qualified personnel.
- Schakel altijd de stroom uit voordat u het apparaat installeert of onderhoudt.
- Zorg ervoor dat alle bedrading voldoet aan de plaatselijke elektrische codes en voorschriften.
- Stel het apparaat niet bloot aan vocht, extreme temperaturen of corrosieve omgevingen.
- Do not attempt to open or modify the device; there are no user-serviceable parts inside.
- Buiten bereik van kinderen houden.
3. Product voorbijview
The Gewiss GW30411 is an electronic 2-channel programmer designed for managing electrical loads with timed switching. It features a clear digital display and intuitive controls for setting programs.
Figuur 1: Voorzijde view of the Gewiss GW30411 Programmer. The display shows the current time (10:22), day (VE 13 GIU, likely Friday 13th June), and the 'ON' status, indicating an active program. Buttons for navigation and setting are visible on the right side.
Belangrijkste kenmerken:
- Digital display for time and program status.
- Two independent channels for flexible programming.
- Handmatige override-functie.
- Compact ontwerp voor eenvoudige installatie.
4. Installatie en installatie
Installation should be carried out by a qualified electrician. Ensure the main power supply is disconnected before proceeding.
4.1 Montage
Mount the programmer in a suitable electrical enclosure or on a DIN rail, ensuring adequate ventilation and protection from environmental factors.
4.2 Bedrading
- Identify the power supply terminals (L and N) and connect them according to the wiring diagram provided with the product packaging.
- Connect the load wires for Channel 1 and Channel 2 to their respective output terminals.
- Double-check all connections for security and correctness before restoring power.
Refer to the detailed wiring diagram included in the product packaging for specific terminal assignments.
5. Gebruiksaanwijzing
After successful installation and power-up, the device will display the current time or a default setting. Use the buttons on the right side of the unit to navigate menus and set parameters.
5.1 Initiële tijd- en datuminstelling
- Druk op de MENU button (if available, or the primary setting button) to enter the settings mode.
- Navigeer naar de TIJD DATUM instellen met behulp van de OMHOOG/OMLAAG knoppen.
- Adjust the hour, minute, day, month, and year using the +/- or OMHOOG/OMLAAG knoppen.
- Bevestig elke instelling met de BINNENKOMEN or OK knop.
5.2 Programmeren van aan/uit-cycli
The GW30411 allows you to set specific ON/OFF times for each of its two channels.
- Ga naar de programmeermodus door op te drukken PROG knop.
- Select the desired channel (Channel 1 or Channel 2).
- Stel de gewenste ON time (hour and minute) for the first event.
- Stel de gewenste UIT time (hour and minute) for the first event.
- Specify the days of the week for which the program should be active.
- Save the program and exit programming mode.
5.3 Handmatige opheffing
To temporarily override the programmed schedule, use the AAN/UIT or HANDMATIG button. This typically cycles through ON, OFF, and AUTO modes. The display will indicate the current manual status.
6. Onderhoud
The Gewiss GW30411 programmer requires minimal maintenance.
- Schoonmaak: Veeg de buitenkant af met een zachte, droge doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
- Inspectie: Periodically check for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified technician.
7. Probleemoplossing
If you encounter issues with your GW30411 programmer, refer to the following common problems and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Display is leeg. | Geen stroomvoorziening. | Controleer de stroomonderbreker en de bedrading. |
| Programmed events are not activating. | Incorrect time/date setting; Program not saved; Manual override active. | Verify time/date; Re-enter and save program; Check manual override status. |
| Het apparaat reageert niet. | Tijdelijke softwarestoring. | Disconnect power for 30 seconds, then restore. If problem persists, contact support. |
8. Specificaties
- Merk: Gewiss
- Model: GW30411
- Type: Electronic 2-Channel Programmer
- Fabrikant: GEWISS
- ASIN: B00OM8R0GS
- Beschikbaarheid van reserveonderdelen: Informatie niet beschikbaar
- Software-updates gegarandeerd tot: Informatie niet beschikbaar
- Datum van vermelding op Amazon.com.be: 20 mei 2022
9. Garantie en ondersteuning
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Gewiss products are designed for reliability and performance.
If you require technical assistance or have questions not covered in this manual, please contact Gewiss customer support or your authorized distributor. Ensure you have your product model number (GW30411) and purchase details ready.
