Gebruikershandleiding voor het Supermicro X10SLM+-LN4F moederbord

1. Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Supermicro X10SLM+-LN4F motherboard. Designed for server applications, this motherboard features an LGA1150 socket, Intel C224 PCH, DDR3 memory support, and multiple Gigabit Ethernet ports. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.

2. Product voorbijview

The Supermicro X10SLM+-LN4F is a microATX server motherboard built for reliability and performance. Key features include:

• LGA1150 Socket for Intel Xeon E3-1200 v3/v4 and 4th Gen Core i3 processors.
• Intel C224 PCH chipset.
• Four DDR3 DIMM slots supporting up to 64GB ECC/non-ECC UDIMM.
• Multiple SATA3 (6Gbps) ports.
• Integrated quad Gigabit Ethernet ports.
• USB 3.0 and USB 2.0 support.
• VGA output for integrated graphics.

Figuur 2.1: Top-down view of the Supermicro X10SLM+-LN4F motherboard, showing the CPU socket, DIMM slots, PCIe slots, and various connectors.

Figuur 2.2: Gehoekt view of the motherboard, highlighting the layout of components and expansion slots.

Figuur 2.3: Rear I/O panel of the Supermicro X10SLM+-LN4F motherboard, featuring multiple LAN ports, USB ports, and serial ports.

3. Installatie en installatie

Before beginning installation, ensure your system is powered off and disconnected from the power source. Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

3.1. CPU-installatie

1. Zoek de LGA1150 CPU-socket op het moederbord.
2. Duw de laadhendel voorzichtig naar beneden en trek hem opzij om het bevestigingsframe van de CPU-socket te openen.
3. Lijn het driehoekige merkteken op de CPU zorgvuldig uit met het overeenkomstige merkteken op de socket.
4. Plaats de CPU in de socket zonder deze te forceren.
5. Sluit het bevestigingsframe en zet het vast met de lasthendel.
6. Breng een dunne, gelijkmatige laag koelpasta aan op de geïntegreerde warmteverspreider (IHS) van de CPU.
7. Installeer de CPU-koeler volgens de instructies van de fabrikant.

3.2. Geheugen (RAM) installatie

1. Locate the four DDR3 DIMM slots. For optimal performance, refer to the motherboard's specific memory population guidelines, typically starting with slots closest to the CPU or specific colored slots for dual-channel configurations.
2. Open the retention clips at both ends of the DIMM slot.
3. Lijn de inkeping op de DDR3-geheugenmodule uit met de sleutel in de DIMM-sleuf.
4. Plaats de geheugenmodule stevig in de sleuf totdat de borgclips vastklikken.
5. Zorg ervoor dat beide klemmen volledig gesloten zijn en dat de module correct is geplaatst.

3.3. Installatie van opslagapparaat

Connect SATA storage devices (HDDs/SSDs) to the SATA ports on the motherboard using SATA data cables. Connect the power cables from your power supply unit (PSU) to the storage devices.

3.4. Installatie van de uitbreidingskaart

This motherboard features PCI Express (PCIe) slots. To install an expansion card:

1. Remove the corresponding slot cover from your chassis.
2. Lijn de uitbreidingskaart uit met het PCIe-slot.
3. Druk stevig naar beneden totdat de kaart volledig in de gleuf zit.
4. Secure the card with a screw or retention clip from your chassis.

3.5. Stroomaansluitingen

• 24-pins ATX-voedingsconnector: Connect the main 24-pin power cable from your PSU to the ATX power connector on the motherboard.
• 8-pin EPS/CPU Power Connector: Connect the 8-pin (or 4+4 pin) CPU power cable from your PSU to the EPS connector near the CPU socket.

3.6. Aansluitingen voor voorpaneel en achterpaneel

• Connectoren op het voorpaneel: Connect the power switch, reset switch, power LED, and HDD activity LED cables from your chassis to the corresponding pins on the motherboard's front panel header. Refer to the motherboard's silkscreen labels for correct orientation.
• USB-headers: Connect front panel USB ports to the onboard USB headers.
• Audio Headers: Connect front panel audio jacks to the onboard audio header.
• Achterste I/O-paneel: Connect peripherals such as keyboard, mouse, monitor (via VGA), and network cables (to the Gigabit Ethernet ports) to the rear I/O panel.

4. Gebruiksaanwijzing

4.1. Initial Power On and BIOS/UEFI Setup

1. After all components are installed and connected, connect the power cord to the PSU and turn on the power switch on the PSU.
2. Press the power button on your chassis.
3. Druk tijdens de Power-On Self-Test (POST) herhaaldelijk op de VERDELEN or F2 Druk op de toets (of zoals aangegeven op het scherm) om het BIOS/UEFI-instellingenprogramma te openen.
4. In the BIOS/UEFI, configure essential settings such as date and time, boot order, and enable/disable specific features as required for your operating system and hardware.
5. Sla de wijzigingen op en sluit het BIOS/UEFI af. Het systeem wordt opnieuw opgestart.

4.2. Installatie van het besturingssysteem

To install an operating system (e.g., Windows, Linux, VMware ESXi):

1. Insert the operating system installation media (USB drive or DVD) into the system.
2. Boot from the installation media (you may need to adjust the boot order in BIOS/UEFI).
3. Follow the on-screen prompts to install the operating system on your chosen storage device.
4. After installation, install all necessary drivers for the motherboard components (chipset, LAN, VGA, etc.) from the Supermicro website or the provided driver disc.

5. Onderhoud

Regelmatig onderhoud draagt ​​bij aan de lange levensduur en stabiele werking van uw moederbord en systeem.

5.1. Schoonmaken

• Periodically clean dust from the motherboard and system components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Gebruik geen vloeibare reinigingsmiddelen rechtstreeks op de componenten.
• Ensure proper airflow within the chassis by keeping fan vents clear.

5.2. Firmware and Driver Updates

• Controleer de Supermicro website periodically for updated BIOS/UEFI firmware and drivers for your motherboard model.
• Follow the provided instructions carefully when updating firmware to avoid system instability.

5.3. Milieuoverwegingen

• Operate the motherboard within recommended temperature and humidity ranges to prevent damage.
• Ensure adequate ventilation in the server chassis.

6. Probleemoplossing

In dit gedeelte vindt u oplossingen voor veelvoorkomende problemen die u kunt tegenkomen.

6.1. Geen stroom / Geen POST (Power-On Self-Test)

• Verify that the power supply unit (PSU) is connected correctly to the motherboard (24-pin ATX and 8-pin EPS connectors).
• Ensure the PSU is switched on and receiving power from the wall outlet.
• Controleer of de kabel van de aan/uit-schakelaar op het voorpaneel correct is aangesloten op de connector op het moederbord.
• Reseat the CPU, RAM modules, and any expansion cards.
• Probeer op te starten met alleen de essentiële componenten (CPU, één RAM-module, CPU-koeler) om het probleem te isoleren.
• Listen for beep codes from the system speaker, which can indicate specific hardware failures. Refer to the Supermicro website for beep code interpretations.

6.2. Weergaveproblemen

• Ensure the monitor is properly connected to the motherboard's VGA port.
• Controleer of de monitor is ingeschakeld en is ingesteld op de juiste invoerbron.
• If using a discrete graphics card, ensure it is properly seated and connected to power (if required).

6.3. Operating System Not Booting

• Check the boot order in the BIOS/UEFI to ensure the correct storage device is prioritized.
• Verify that the operating system is installed correctly on the storage device.
• Ensure SATA data and power cables are securely connected to the storage device and motherboard.

7. Specificaties

Below are the technical specifications for the Supermicro X10SLM+-LN4F motherboard:

Note: Specifications are subject to change without notice. For the most current information, please refer to the official Supermicro product page.

8. Garantie en ondersteuning

For detailed warranty information, please refer to the warranty card included with your product or visit the official Supermicro website. Technical support is available through Supermicro's customer service channels, including their support portal, email, and phone. Please have your product model number (X10SLM+-LN4F) and serial number ready when contacting support.

For the latest drivers, BIOS updates, and additional documentation, please visit: www.supermicro.com