Invoering
This manual provides comprehensive instructions for the setup, operation, and maintenance of your LiftMaster 893Max Security+ 2.0 3-Button Remote Control. This multi-function remote is designed to control up to three garage door openers, gate operators, or MyQ enabled light accessories. It features Security+ 2.0 rolling code technology for enhanced security.
Afbeelding: Voorzijde view of the LiftMaster 893Max 3-Button Remote Control.
Veiligheidsinformatie
Always ensure the area around the garage door or gate is clear before operating. Keep remote controls out of reach of children. Do not allow children to play with the remote control or the garage door/gate operator. Only operate the garage door/gate when it is in full view en vrij van obstakels.
- Do not attempt to repair the remote control yourself. Refer to qualified service personnel.
- Gooi batterijen op de juiste manier weg, volgens de plaatselijke voorschriften.
- The Security+ 2.0 technology ensures a new code is sent with every click, enhancing security.
Image: LiftMaster 893Max remote control highlighting Security+ 2.0 technology.
Inhoud van het pakket
- 1 x LiftMaster 893Max 3-Button Remote Control
- 1 x zonneklepclip
- 1 x 3V Lithium Battery (pre-installed)
Installatie en programmering
The LiftMaster 893Max remote control is compatible with all LiftMaster garage door openers manufactured since January 1993, and all 315MHz Security+® LiftMaster and Elite Series Gate Operators. It is also compatible with Chamberlain and Craftsman Security+ 2.0 operators.
Programmeerinstructies:
- Zoek de knop Leren: On your garage door opener motor unit, locate the "Learn" button. The color of this button (yellow, purple, red/orange, or green) indicates the frequency and technology of your opener.
- Leermodus activeren: Press and immediately release the "Learn" button on your garage door opener. The LED indicator on the opener will light up, indicating it is in learn mode. You have approximately 30 seconds to complete the next step.
- Programmeer de afstandsbediening: On your 893Max remote control, press and hold the button you wish to program. The remote's LED will flash.
- Release the Button: Release the remote control button when the garage door opener lights flash or two clicks are heard. This confirms that the remote has been successfully programmed.
- Test de afstandsbediening: Press the programmed button on your remote control to test its operation.
Image: LiftMaster 893Max remote control with "Programmable" text, indicating compatibility.
Video: Programming Demonstration
Video: A demonstration of programming the LiftMaster 893MAX 3-Button Garage Door Remote.
Gebruiksaanwijzing
The 893Max remote control features three buttons, allowing you to operate up to three different devices such as garage doors, gate operators, or MyQ enabled light accessories.
- Opening/Closing a Device: Press the programmed button once to activate the associated garage door, gate, or light. Pressing it again will stop or reverse the operation, depending on the device's current state.
- Vizier Clip: The included visor clip allows for convenient attachment to your vehicle's sun visor for easy access.
- LED-indicator: The remote's LED light signals activation and assists during the programming process.
Image: LiftMaster 893Max remote control showcasing its three-button design.
Video: Remote Control in Action
Video: A demonstration of the LiftMaster 893Max remote control operating a garage door.
Video: Another demonstration of the LiftMaster 893Max remote control's functionality.
Onderhoud
Batterij vervangen:
The remote control uses one 3V Lithium battery (CR2032). The average battery life is approximately 5 years. When the battery is low, the LED indicator may dim or fail to light up during operation.
- Open the remote control casing. This usually involves a small screw or a snap-on cover.
- Verwijder voorzichtig de oude CR2032-batterij.
- Insert a new 3V CR2032 Lithium battery, ensuring correct polarity (+/-).
- Sluit de afstandsbediening casing veilig.
Schoonmaak:
Veeg de afstandsbediening af met een zachte, droge doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| De afstandsbediening bedient het apparaat niet. | Batterij is leeg of bijna leeg. | Replace the 3V Lithium battery (CR2032). |
| De afstandsbediening is niet geprogrammeerd. | Remote lost its programming or was never programmed. | Follow the "Setup and Programming" instructions to reprogram the remote. |
| De afstandsbediening heeft een beperkt bereik. | Storingen of een bijna lege batterij. | Ensure there are no obstructions. Replace battery if needed. |
| Afstandsbediening is niet compatibel. | Opener uses a different technology or frequency. | Verify your garage door opener's learn button color and frequency. The 893Max is compatible with LiftMaster, Chamberlain, and Craftsman Security+ 2.0 operators (green, yellow, amber, red, or purple learn buttons). |
Specificaties
- Model: 893MAX
- Merk: LiftMaster
- Aantal knoppen: 3
- Technologie: Security+ 2.0 rolling code
- Verenigbaarheid: All LiftMaster garage door openers manufactured since January 1993 (green, yellow, amber, red, or purple learn buttons), 315MHz Security+® LiftMaster and Elite Series Gate Operators, Chamberlain, and Craftsman Security+ 2.0 operators.
- Batterij: 1 x 3V Lithium (CR2032) (included)
- Artikelgewicht: 0.96 ons
- Productafmetingen: 4.63 x 2.75 x 1.13 inch
- Speciale eigenschap: Ergonomic design, Visor Clip included
Garantie en ondersteuning
The LiftMaster 893Max remote control comes with a 1 jaar garantie from the date of purchase, protecting against defects in materials and workmanship.
Image: LiftMaster 893Max remote control highlighting the 1-year warranty.
For technical assistance, troubleshooting, or warranty claims, please contact LiftMaster customer support. You can find contact information on the official LiftMaster webwebsite of via uw productverkoper.
