1. Inleiding
This instruction manual provides important information regarding the Briggs & Stratton 691696 screw. This component is a genuine replacement part designed to maintain the optimal performance and integrity of your outdoor power equipment. Using genuine Briggs & Stratton parts ensures compatibility and adherence to original equipment manufacturer (OEM) standards, which is crucial for equipment longevity and compliance with emission regulations.
2. Product voorbijview
The Briggs & Stratton 691696 screw is a critical fastener for various applications within Briggs & Stratton outdoor power equipment. It is an OEM part, meaning it is manufactured to the exact specifications of the original component.
Figuur 1: Briggs & Stratton 691696 Screw. This image displays the genuine replacement screw, highlighting its design and material suitable for outdoor power equipment applications.
Belangrijkste kenmerken:
- Origineel Briggs & Stratton-onderdeel: garandeert kwaliteit en compatibiliteit.
- OEM Standard: Manufactured to exact original equipment specifications.
- Direct Replacement: Replaces old Briggs & Stratton part numbers 94943, 557061, and 691696.
- Durable Construction: Made from alloy steel with a multi-color finish.
3. Installatie
This screw is intended as a direct replacement for specific applications within Briggs & Stratton engines and equipment. Proper installation is crucial for the secure fastening of components.
- Identificeer de juiste locatie: Refer to your equipment's specific service manual or parts diagram to locate the exact position where the 691696 screw is required.
- Verwijder de oude schroef (indien van toepassing): Carefully remove the old or damaged screw using appropriate tools. Ensure no debris or damaged threads remain.
- Nieuwe schroef plaatsen: Align the Briggs & Stratton 691696 screw with the threaded hole.
- Goed vastdraaien: Hand-tighten the screw initially to ensure proper thread engagement. Then, use a suitable tool (e.g., socket wrench) to tighten the screw to the manufacturer's specified torque. Over-tightening can strip threads, while under-tightening can lead to loose components.
- Controleer of het past: After tightening, ensure the component secured by the screw is firmly in place and does not exhibit any excessive movement.
Opmerking: Always consult your specific equipment's service manual for detailed torque specifications and installation procedures.
4. Functie en gebruik
The 691696 screw serves as a critical fastening element, securing various parts within Briggs & Stratton outdoor power equipment. Its design, including thread type (Unified National Coarse - UNC) and material (Alloy Steel), ensures a strong and reliable connection, contributing to the overall structural integrity and operational safety of the machinery.
This screw is designed for applications requiring a 1/4 inch x 4 inch fastener with a partially threaded shaft and a socket head. Its primary function is to hold components together under operational stresses, preventing loosening due to vibration or movement.
5. Onderhoud
As a fastener, the 691696 screw requires minimal maintenance. However, periodic inspection is recommended to ensure continued performance and safety:
- Visuele inspectie: Regularly check the screw for signs of corrosion, damage, or deformation.
- Controle van de dichtheid: Periodically verify that the screw remains securely tightened to its specified torque. Vibrations during equipment operation can sometimes cause fasteners to loosen over time.
- Vervanging: If the screw shows any signs of wear, damage, or if its threads are stripped, replace it immediately with a new genuine Briggs & Stratton 691696 screw to prevent equipment malfunction or further damage.
6. Probleemoplossing
If you encounter issues related to the 691696 screw, consider the following:
- Los onderdeel: If a component secured by the screw becomes loose, first check if the screw is properly tightened. If it is loose, re-tighten to the specified torque. If it repeatedly loosens, inspect the threads of both the screw and the receiving component for damage.
- Beschadigde schroefdraad: If the screw's threads are stripped, it will not hold securely. Replace the screw. If the threads in the receiving component are stripped, professional repair or replacement of that component may be necessary.
- Onjuist onderdeel: Ensure you are using the correct part number (691696) for your specific application. Using an incorrect screw can lead to improper fitment and potential equipment damage.
- Difficulty in Installation: If the screw does not thread smoothly, do not force it. Check for thread alignment, debris in the hole, or cross-threading.
7. Specificaties
| Specificatie | Detail |
|---|---|
| Merk | Briggs & Stratton |
| Modelnummer | 691696 |
| Vervangt onderdeelnummers | 94943, 557061, 691696 |
| Materiaal | Gelegeerd staal |
| Hoofd Stijl | Stopcontact |
| Bevestigingsmaat | 1/4 inch x 4 inch |
| Draaddekking | Gedeeltelijk schroefdraad |
| Stelschroef Draadtype | Verenigde Nationale Raad (UNC) |
| Draadstijl | Rechterhand |
| Draadklasse | 2A |
| Artikelgewicht | 0.32 ons (ongeveer) |
| Productafmetingen (L x B x H) | 4 x 4 x 0.25 inch (ongeveer) |
| Aantal stuks | 1 |
| UPC | 024847237283 |
8. Garantie en ondersteuning
As a genuine Briggs & Stratton part, this screw is covered by the standard Briggs & Stratton warranty for replacement parts. For specific warranty details, claims, or technical support, please refer to the official Briggs & Stratton website of neem contact op met de klantenservice.
Using genuine parts ensures that your equipment maintains its original performance and warranty coverage. For further assistance, you may visit the official Briggs & Stratton webwebsite: www.briggsandstratton.com
