Invoering
This manual provides detailed instructions for the installation, operation, and maintenance of your Leviton SSJ7-40 1-Gang 1-Receptacle Stainless Steel Midway Size Wallplate. Designed for durability and a clean aesthetic, this wallplate is suitable for various residential and commercial applications, covering a single 1.406-inch diameter locking/straight blade type receptacle.
The SSJ7-40 features a brushed stainless steel finish, offering a non-magnetic and robust solution for your electrical installations. It is UL and CSA approved, ensuring compliance with safety standards.
Veiligheidsinformatie
WAARSCHUWING: To avoid fire, shock, or death, always turn off power at the circuit breaker or fuse box before wiring or servicing. This product must be installed in accordance with national and local electrical codes.
- Zorg ervoor dat de stroom is uitgeschakeld vóór installatie.
- Raadpleeg een gekwalificeerde elektricien als u twijfelt over enig onderdeel van deze instructies.
- Do not use this wallplate for applications other than its intended purpose.
- Inspect the wallplate for any damage before installation. Do not install damaged products.
Inhoud van het pakket
- Leviton SSJ7-40 1-Gang 1-Receptacle Stainless Steel Wallplate
- Mounting Screws (typically two, matching the wallplate finish)
Instellen en installeren
Follow these steps to properly install your Leviton SSJ7-40 wallplate:
- Schakel de stroom uit: Locate the circuit breaker or fuse that controls the power to the receptacle where the wallplate will be installed. Turn off the power completely. Verify power is off using a voltagen tester.
- Verwijder het oude afdekplaatje (indien van toepassing): Draai de bestaande muurplaat voorzichtig los en verwijder deze.
-
Prepare the Wallplate: The Leviton SSJ7-40 wallplate may come with a protective blue film to prevent scratches during shipping and installation. Gently peel off this film from the front surface of the wallplate before mounting.
Image: Leviton SSJ7-40 wallplate showing the blue protective film that needs to be removed before installation.
Image: A hand gently peeling off the blue protective film from the corner of the stainless steel wallplate.
-
Position the Wallplate: Align the new Leviton SSJ7-40 wallplate over the receptacle, ensuring the opening perfectly matches the device.
Image: The Leviton SSJ7-40 wallplate, ready for installation over a single receptacle.
- Secure the Wallplate: Insert the provided mounting screws into the designated holes on the wallplate and carefully tighten them with a screwdriver. Do not overtighten, as this can damage the wallplate or the receptacle.
- Herstel de stroom: Once the wallplate is securely installed, turn the power back on at the circuit breaker or fuse box.
Gebruiksaanwijzing
The Leviton SSJ7-40 wallplate functions as a protective and aesthetic cover for a single 1.406-inch diameter locking/straight blade type receptacle. Once installed, it requires no further operation. Its purpose is to safely enclose the electrical wiring and provide a finished appearance.
Onderhoud
To maintain the appearance and integrity of your stainless steel wallplate:
- Schoonmaak: Veeg het oppervlak af met een zachte, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the brushed stainless steel finish.
- Inspectie: Periodically check the wallplate for any signs of damage, loosening, or discoloration. If any issues are found, ensure power is off before inspecting further or replacing.
Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Wallplate does not fit flush. | Receptacle not properly seated in the electrical box, or mounting screws are overtightened/uneven. | Ensure power is off. Loosen receptacle mounting screws, adjust receptacle position, then re-tighten. Re-install wallplate, ensuring screws are tightened evenly but not excessively. |
| Scratches or marks on the wallplate. | Protective film not removed, or abrasive cleaning materials used. | If protective film is still present, carefully peel it off. For existing scratches, consider replacement for aesthetic reasons. Use only soft cloths and mild cleaners for maintenance. |
| Wallplate appears loose. | De bevestigingsschroeven zitten los. | Ensure power is off. Gently tighten the mounting screws until the wallplate is secure. Do not overtighten. |
Specificaties
| Modelnummer | SSJ7-40 |
| Configuratie | 1-Gang, 1-Receptacle (1.406-inch diameter hole) |
| Materiaal | 302 Roestvrij staal |
| Afwerkingstype | Geborsteld roestvrij staal |
| Kleur | Non-Magnetic Stainless Steel |
| Designated Size | Halverwege |
| Afmetingen (Product) | 6.63 x 4.13 x 0.25 inch (ongeveer) |
| Artikelgewicht | 2.11 ons |
| Goedkeuringen | UL, CSA |
| Installatietype | Schroef-In |
Garantie-informatie
Dit Leviton-product valt onder de fabrieksgarantie. Voor specifieke informatie over de garantieperiode en -voorwaarden kunt u de bij uw aankoop meegeleverde documentatie raadplegen of de officiële Leviton-website bezoeken. webwebsite. Bewaar uw aankoopbewijs voor garantieclaims.
Steun
For technical assistance, product inquiries, or further support, please contact Leviton customer service. You can find contact information and additional resources on the official Leviton webwebsite:
When contacting support, please have your product model number (SSJ7-40) available.
