1. Inleiding
This user manual provides essential information for the safe and effective use of your Eiko FCB 120V 600W T-4 R7s Base Halogen Bulb. This high-performance lamp is designed for various applications requiring bright, white light. Please read this manual thoroughly before installation and operation, and retain it for future reference.
2. Veiligheidsinformatie
WARNING: Halogen bulbs operate at high temperatures and can cause burns or fire if not handled properly. Always allow the bulb to cool completely before handling.
- Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves when handling.
- Ensure the power supply is disconnected before installing, removing, or cleaning the bulb.
- Use only in fixtures rated for the bulb's wattage en voltagen (600W, 120V).
- Do not use if the glass envelope is scratched or cracked.
- Verwijderd houden van brandbare materialen.
- Gooi gebruikte lampen weg volgens de plaatselijke voorschriften.
3. Product voorbijview
The Eiko FCB 120V 600W T-4 R7s Base Halogen Bulb is a high-quality lamp featuring a robust tungsten filament designed to produce a brighter, whiter light. Its T-4 shape and R7s base make it suitable for specific lighting fixtures.
4. Specificaties
| Specificatie | Waarde |
|---|---|
| Merk | Eiko |
| Modelnummer | FCB |
| Lichttype | Halogeen |
| Wattage | 600 watt |
| Deeltage | 120 Volt |
| Bolvorm Grootte | T4 |
| Basistype | R7s |
| Kleurtemperatuur | 3200 Kelvin |
| Lichte kleur | Helder Wit |
| Materiaal | Wolfraam |
| Productafmetingen | 1 x 1 x 2.7 inch |
| Artikelgewicht | 0.353 ons |
| UPC | 031293031006 |
5. Instellen / Installatie
Follow these steps to safely install your Eiko FCB halogen bulb:
- Zorg ervoor dat de stroom is uitgeschakeld: Before beginning, turn off the power to the fixture at the circuit breaker or fuse box. Verify that the fixture is completely de-energized.
- Koeling toestaan: Als u een bestaande lamp vervangt, laat de oude lamp dan volledig afkoelen voordat u deze aanraakt.
- Draag handschoenen: Handle the new bulb with a clean, lint-free cloth or gloves. Avoid touching the glass envelope directly with bare hands.
- Verwijder de oude lamp (indien van toepassing): Carefully remove the old R7s base bulb from its spring-loaded socket. Gently push one end into the socket and pull the other end out.
- Nieuwe lamp plaatsen: Align the R7s pins of the new bulb with the corresponding slots in the fixture's socket. Gently push one end of the bulb into its socket, then compress the spring-loaded mechanism to allow the other end to slide into place. Ensure both ends are securely seated.
- Herstel de stroom: Zodra de lamp goed vastzit, schakelt u de stroom naar het armatuur weer in.
- Test: Zet de lichtschakelaar aan om te controleren of deze goed werkt.
6. Gebruiksaanwijzing
The Eiko FCB halogen bulb operates immediately upon receiving power. Simply turn on the light switch connected to the fixture to illuminate the bulb. There are no special operating procedures beyond standard electrical safety practices.
- Ensure the fixture's switch is in the 'OFF' position before connecting power.
- Turn the switch to 'ON' to activate the bulb.
- For optimal bulb life, avoid frequent on/off cycling.
7. Onderhoud
Proper maintenance can extend the life and performance of your halogen bulb:
- Schoonmaak: If the bulb's glass becomes dirty or smudged, turn off the power and allow the bulb to cool completely. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
- Vervanging: Halogen bulbs dim over time. For best performance, consider replacing bulbs when their light output noticeably decreases. Always replace with a bulb of the same wattage en voltage (FCB 120V 600W T-4 R7s Base).
- Inspectie: Periodically inspect the bulb and fixture for any signs of damage or wear.
8. Probleemoplossing
If you encounter issues with your Eiko FCB halogen bulb, refer to the following common problems and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Lampje brandt niet | Geen stroom naar armatuur Lamp niet goed geplaatst Lamp is doorgebrand Faulty fixture or switch | Controleer de stroomonderbreker/zekering Zorg ervoor dat de lamp volledig is geplaatst Vervang de lamp Raadpleeg een elektricien |
| Lamp flikkert | Losse verbinding Incorrect dimmer switch (if applicable) Deeltage fluctuaties | Turn off power and re-seat bulb Ensure dimmer is compatible with halogen Raadpleeg een elektricien |
| Lamp brandt snel uit | Frequent handling of glass Overvoltage Overmatige trillingen Slechte ventilatie in armatuur | Handle with gloves/cloth Controleer het armatuurvolumetage Ensure stable mounting Check fixture for proper airflow |
If the problem persists after attempting these solutions, please contact a qualified electrician or the manufacturer's support.
9. Garantie en ondersteuning
Eiko products are manufactured to high standards and are designed for reliable performance. For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Eiko webwebsite of neem rechtstreeks contact op met hun klantenservice. Bewaar uw aankoopbewijs als aankoopbewijs.
Eiko Customer Support: Bezoek alstublieft www.eiko.com for contact information and further assistance.
