Alpine SPS-600 6.5-inch Coaxial Car Speaker Instruction Manual

1. Inleiding

The Alpine SPS-600 is a 6.5-inch 2-way coaxial car speaker system designed to enhance your vehicle's audio experience. These speakers feature a robust design for clear sound reproduction and reliable performance. Key specifications include a power handling capacity of 80 Watts RMS (240 Watts Peak), a frequency response range of 70Hz to 22kHz, and a sensitivity of 88dB /W(1m).

2. Veiligheidsinformatie

• Professionele installatie aanbevolen: If you are unfamiliar with car audio wiring and installation, it is recommended to seek professional assistance to prevent damage to the speakers or your vehicle.
• Koppel de batterij los: Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and electrical hazards.
• Juiste bedrading: Ensure all wiring connections are secure and correctly polarized. Incorrect wiring can lead to speaker damage or poor sound quality.
• Montagebeveiliging: Zorg ervoor dat de luidsprekers stevig vastzitten, zodat ze niet losraken tijdens het rijden. Dit kan namelijk letsel of schade veroorzaken.
• Overheers niet: Do not exceed the speaker's rated power handling capacity (80 Watts RMS / 240 Watts Peak) to prevent damage.
• Ventilatie: Ensure adequate ventilation around the speakers and any connected amplifiers om oververhitting te voorkomen.

3. Inhoud van het pakket

Controleer of alle onderdelen in het pakket aanwezig zijn voordat u met de installatie begint:

• Alpine SPS-600 6.5-inch Coaxial Speakers (Pair)
• Luidsprekerroosters (indien inbegrepen)
• Montageschroeven en clips
• Luidsprekerkabel (indien meegeleverd)
• Installatiesjabloon (indien aanwezig)

4. Installatie en installatie

This section outlines the general steps for installing your Alpine SPS-600 speakers. Specific vehicle requirements may vary.

4.1. Voorbereiding

1. Koppel de minpool van de accu van uw voertuig los.
2. Remove the existing speakers or trim panels to access the speaker mounting locations.
3. Inspect the mounting location for adequate depth and clearance for the new speakers. The SPS-600 speakers have a 6.5-inch woofer diameter and a 2.54 cm tweeter diameter.

4.2. De luidsprekers monteren

The Alpine SPS-600 speakers are designed for coaxial car mounting.

1. Place the speaker in the desired mounting location. If using an installation template, mark and cut the opening as necessary.
2. Align the speaker's mounting holes with the vehicle's speaker mounts. If new holes are required, drill pilot holes carefully to avoid damaging vehicle components.
3. Bevestig de luidspreker met de meegeleverde montageschroeven. Draai ze niet te vast aan.

Voorkant view of the Alpine SPS-600 6.5-inch coaxial car speaker, showcasing het ontwerp en de componenten.

4.3. Bedradingsaansluitingen

The SPS-600 speakers utilize wired coaxial connectivity.

1. Connect the positive (+) terminal of the speaker to the positive (+) speaker output wire from your head unit or ampverliezer.
2. Connect the negative (-) terminal of the speaker to the negative (-) speaker output wire from your head unit or ampverliezer.
3. Ensure all connections are tight and insulated to prevent short circuits.

4.4. Laatste stappen

1. Plaats alle verwijderde sierpanelen of roosters terug.
2. Sluit de negatieve accupool van het voertuig weer aan.
3. Test the speaker functionality.

5. Gebruiksaanwijzing

Once installed, the Alpine SPS-600 speakers operate as part of your vehicle's audio system. They are designed for stereo audio output.

1. Inschakelen: Turn on your vehicle's head unit or audio receiver.
2. Bronselectie: Select your desired audio source (e.g., radio, CD, MP3 player, smartphone connected to the head unit).
3. Volume aanpassen: Verhoog het volume geleidelijk tot een comfortabel luisterniveau. Vermijd extreem hoge volumes die vervorming veroorzaken, aangezien dit de luidsprekers kan beschadigen.
4. Audio-instellingen: Adjust bass, treble, balance, and fader settings on your head unit to optimize sound quality according to your preference. The SPS-600 features a bass boost capability, which can be further enhanced through head unit settings or an external ampverliezer.

6. Onderhoud

Proper maintenance ensures the longevity and performance of your Alpine SPS-600 speakers.

• Schoonmaak: Use a soft, dry cloth to gently wipe dust and debris from the speaker cones and grilles. Avoid using harsh chemicals or abrasive cleaners.
• Milieubescherming: While designed for vehicle use, avoid exposing speakers to excessive moisture or extreme temperatures. These speakers are not water-resistant.
• Regelmatige inspectie: Controleer regelmatig of de bevestigingsschroeven goed vastzitten en of de bedrading goed is aangesloten.

7. Probleemoplossing

If you encounter issues with your Alpine SPS-600 speakers, refer to the following common troubleshooting steps:

8. Specificaties

9. Garantie en ondersteuning

Voor garantie-informatie en technische ondersteuning kunt u terecht bij de officiële Alpine-website. webBezoek de website of neem rechtstreeks contact op met de klantenservice van Alpine. Bewaar uw aankoopbewijs voor garantieclaims.

Alpine Klantenservice: Raadpleeg de productverpakking of de officiële Alpine-website. website voor de meest actuele contactinformatie.