1. Product voorbijview
The Sealey SA621 is a robust 13mm Ø air drill designed for professional and demanding applications. It features a composite lightweight moulded housing that reduces the effects of chill on the operator's hands, enhancing comfort during prolonged use. The drill is fully reversible with a convenient thumb control located above the motor housing, allowing for easy direction changes. Its air motor is equipped with quality bearings, ensuring smooth and powerful operation. A built-in muffler in the handle exhaust helps to reduce noise levels, contributing to a quieter working environment. The drill is fitted with a Jacobs keyless chuck, enabling fast and efficient bit changes.
Figuur 1.1: Voorzijde view of the Sealey SA621 Air Drill, showcasing its ergonomic design, keyless chuck, and auxiliary handle.
2. Veiligheidsinstructies
Always adhere to general workshop safety practices when using this equipment. Ensure that all safety warnings and instructions are read and understood before operating the drill. Failure to do so may result in electric shock, fire, and/or serious injury.
2.1. Persoonlijke beschermingsmiddelen (PBM)
- Always wear approved eye protection (safety glasses or goggles) to protect against flying debris.
- Wear hearing protection (earplugs or earmuffs) to prevent noise-induced hearing loss, especially during prolonged use.
- Wear appropriate work gloves to improve grip and protect hands.
- Do not wear loose clothing, ties, or jewelry that could get caught in moving parts. Tie back long hair.
2.2. Air Supply Safety
- Ensure the air supply is clean and dry. Moisture in the air line can damage the tool.
- Do not exceed the maximum recommended air pressure for the tool (refer to specifications).
- Koppel altijd de luchttoevoer los voordat u accessoires verwisselt, onderhoud uitvoert of wanneer het gereedschap niet in gebruik is.
- Never point the air tool or air hose at yourself or others.
2.3. Veiligheid op het werkgebied
- Houd de werkplek schoon, goed verlicht en vrij van rommel.
- Zorg voor voldoende ventilatie, vooral bij het werken met materialen die stof of dampen produceren.
- Secure the workpiece firmly to prevent movement during drilling.
3. Inhoud van het pakket
Upon opening the package, please verify that all components are present and undamaged. If any items are missing or damaged, contact your supplier immediately.
- 1 x Sealey SA621 Air Drill with 13mm Keyless Chuck
4. Instellen
4.1. Aansluiten op de luchttoevoer
- Ensure your air compressor is capable of providing the required air pressure and volume (refer to specifications).
- Connect a suitable air hose (minimum 3/8" I.D.) to the air inlet of the drill. It is recommended to use an in-line air filter/lubricator unit to ensure clean, lubricated air supply.
- Secure all connections to prevent air leaks.
- Set the air compressor regulator to the recommended operating pressure.
4.2. Installing Drill Bits (Keyless Chuck)
- Ensure the air supply is disconnected from the drill.
- Draai de kraag van de klauw tegen de klok in om de klauw te openen.
- Steek de boor volledig in de boorkop en zorg ervoor dat deze gecentreerd is.
- Rotate the chuck collar clockwise to tighten the jaws firmly around the drill bit. Hand-tighten only; do not use tools to overtighten.
- Verify the bit is securely held before reconnecting the air supply.
Figuur 4.1: Zijkant view of the Sealey SA621 Air Drill, showing the auxiliary handle attachment point and the keyless chuck.
5. Gebruiksaanwijzing
5.1. Starten en stoppen
- To start the drill, depress the trigger. The speed is controlled by the amount of trigger depression.
- Om de boor te stoppen, laat u de trekker los.
5.2. Reversible Function
The drill features a reversible function for driving screws or extracting bits. The direction control is a thumb switch located above the motor housing.
- Duw de schakelaar naar links voor voorwaartse (met de klok mee) rotatie.
- Duw de schakelaar naar rechts voor de omgekeerde (tegen de klok in) draaiing.
- Zorg er altijd voor dat de boormachine volledig tot stilstand is gekomen voordat u de draairichting verandert.
5.3. Boortechnieken
- Always apply steady, even pressure. Do not force the drill, allow the tool to do the work.
- For drilling into metal, use a center punch to mark the drilling point to prevent the bit from wandering.
- Use appropriate drill bits for the material being drilled.
- Clear chips regularly, especially when drilling deep holes, to prevent overheating and binding.
- When drilling through thin materials, place a scrap piece of wood underneath to prevent splintering or tearing.
Figure 5.1: The Sealey SA621 Air Drill in operation, demonstrating its use for precision drilling in automotive applications.
Figuur 5.2: Nog een view of the Sealey SA621 Air Drill being used on a vehicle panel, highlighting its maneuverability.
6. Onderhoud
Regular maintenance ensures the longevity and optimal performance of your Sealey SA621 Air Drill. Always disconnect the air supply before performing any maintenance.
6.1. Smering
- Air tools require regular lubrication. Add a few drops of good quality air tool oil into the air inlet before and after each use, or if the tool is stored for an extended period.
- If using an in-line lubricator, ensure it is filled with air tool oil and adjusted correctly.
6.2. Reiniging en opslag
- Clean the exterior of the drill with a damp lap. Gebruik geen agressieve oplosmiddelen.
- Store the drill in a dry, secure location, away from direct sunlight and extreme temperatures.
- If storing for an extended period, apply a light coat of oil to metal parts to prevent corrosion.
6.3. Onderhoud van de klauw
- Periodically inspect the chuck jaws for wear or damage. Replace if necessary.
- Houd de boorkopbekken schoon en vrij van vuil om een goede grip op de boor te garanderen.
7. Probleemoplossing
This section addresses common issues you might encounter with your Sealey SA621 Air Drill. For problems not listed here, contact qualified service personnel.
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Drill loses power or runs slowly. | Low air pressure; insufficient air volume; clogged air filter; lack of lubrication. | Check compressor pressure and hose size; clean/replace air filter; lubricate tool. |
| Chuck does not hold bit securely. | Chuck jaws worn or dirty; bit shank damaged. | Clean chuck jaws; replace worn chuck; use bits with undamaged shanks. |
| Overmatig geluid of trillingen. | Lack of lubrication; internal damage; loose components. | Lubricate tool; inspect for loose parts; if problem persists, seek professional service. |
8. Specificaties
The following table provides the technical specifications for the Sealey SA621 Air Drill.
| Functie | Detail |
|---|---|
| Merk | Zeeleeuwen |
| Modelnummer | SA621 |
| Chuck-maat | 13mm Ø (Keyless) |
| Energiebron | Wind Powered (Air) |
| Maximale rotatiesnelheid | 800 toeren per minuut |
| Aantal snelheden | 1 |
| Materiaal | Composite Housing |
| Artikelgewicht | 1.53 kilogram (3.37 pond) |
| Productafmetingen | 0.39 cm L x 0.39 cm B x 0.39 cm H (ongeveer) |
| Speciale kenmerken | Keyless Chuck, Lightweight, Reversible, Muffler |
9. Garantie en ondersteuning
Sealey products are manufactured to high standards and, subject to proper use and maintenance, will give years of trouble-free performance. This product is covered by a manufacturer's warranty.
9.1. Garantie-informatie
The EU Spare Part Availability Duration for this product is 1 year. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sealey webwebsite. Bewaar uw aankoopbewijs voor garantieclaims.
9.2. Klantenservice
For technical assistance, spare parts, or service inquiries, please contact your authorized Sealey dealer or visit the official Sealey website for contact information. When contacting support, please have your product model number (SA621) and serial number (if applicable) ready.
