Sealey SA2 Luchtslagsleutel 1/2Sq Aandrijving Gebruiksaanwijzing

1. Inleiding en veiligheidsinformatie

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Sealey SA2 Air Impact Wrench. Please read and understand all instructions before using the tool.

Algemene veiligheidswaarschuwingen:

• Draag altijd de juiste persoonlijke beschermingsmiddelen, waaronder oogbescherming, gehoorbescherming en handschoenen.
• Zorg ervoor dat de luchttoevoer is afgesloten voordat u accessoires verwisselt, onderhoud uitvoert of wanneer het gereedschap niet in gebruik is.
• Do not exceed the maximum operating pressure specified for the tool.
• Houd handen en kleding uit de buurt van bewegende delen.
• Use only genuine Sealey replacement parts and accessories.
• Maintain the tool in good working condition and check for damage before each use.

Figure 1: Sealey SA2 Air Impact Wrench. This image shows the overall design of the impact wrench, highlighting its robust construction and ergonomic grip.

2. Product voorbijview

The Sealey SA2 Air Impact Wrench is a powerful pneumatic tool designed for various fastening and loosening tasks in garage, tire shop, and general workshop environments. It features a durable rocking-dog hammer mechanism and a hardened impact anvil for reliable performance.

Belangrijkste kenmerken:

• Fitted with a standard 1/2" Sq drive anvil.
• Equipped with a robust rocking-dog hammer mechanism.
• Hardened impact anvil for extended durability.
• Four-position adjustable air/torque control.
• Reversible action for both tightening and loosening applications.

Figure 2: Key features of the Sealey SA2 Air Impact Wrench. This diagram illustrates the 1/2" Sq drive anvil, fastening and breakaway torque specifications, and the 4-position adjustable air/torque control with reversible action.

3. Instellen

1. Luchttoevoeraansluiting: Connect the impact wrench to a clean, dry, regulated air supply. Ensure the air hose has an internal diameter of at least 3/8 inch (10 mm) and is fitted with a suitable quick-release coupling. The recommended operating pressure is 90 psi (6.2 bar).
2. Smering: Before first use and daily thereafter, add a few drops of air tool oil into the air inlet. This is crucial for the longevity and performance of the tool. The tool is marked "OIL DAILY!" as a reminder.
3. Eerste controle: Before connecting to the air supply, ensure the trigger is not depressed. Once connected, briefly run the tool to confirm proper operation and lubrication.
4. Socket-bevestiging: Select the appropriate 1/2" Sq drive impact socket for your application and firmly attach it to the anvil.

4. Gebruiksaanwijzing

1. Richtingselectie: Use the F/R (Forward/Reverse) selector switch, typically located near the trigger, to choose the desired direction of rotation. "F" is for fastening (clockwise), and "R" is for loosening (counter-clockwise).
2. Koppelaanpassing: The tool features a four-position adjustable air/torque control. This allows you to regulate the power output for different applications. Start with a lower setting and increase as needed to prevent overtightening or damage to fasteners.
3. Bevestiging:
   • Set the direction to "F" (Forward).
   • Plaats de dop stevig op de bevestiging.
   • Depress the trigger to operate the tool. Release the trigger to stop.
   • For critical applications, always use a torque wrench to achieve the final specified torque.
4. Losmaken:
   • Set the direction to "R" (Reverse).
   • Plaats de dop stevig op de bevestiging.
   • Depress the trigger to operate the tool. Release the trigger to stop.

5. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your Sealey SA2 Air Impact Wrench.

• Dagelijkse smering: Add a few drops of high-quality air tool oil into the air inlet before each use. This lubricates the internal components and prevents corrosion.
• Onderhoud van vliegtuiglijnen: Ensure your air compressor's drain valve is opened daily to release accumulated moisture. Regularly check and clean the air filter and lubricator (if installed) in your air supply system.
• Algemene schoonmaak: Keep the tool clean and free from debris. Wipe down the exterior with a clean cloth. Do not use solvents that may damage the rubber or plastic components.
• Inspectie: Periodically inspect the tool for any signs of wear, damage, or loose fasteners. Pay close attention to the anvil, trigger, and air connections. Replace worn or damaged parts immediately.
• Opslag: When not in use, store the impact wrench in a clean, dry, and secure location, away from direct sunlight and extreme temperatures.

6. Probleemoplossing

If you encounter issues with your Sealey SA2 Air Impact Wrench, refer to the following common troubleshooting steps:

For issues not covered here, or if problems persist, please contact Sealey customer support or an authorized service center.

7. Specificaties

8. Garantie en ondersteuning

The Sealey SA2 Air Impact Wrench comes with a 1 jaar garantie. This warranty covers defects in materials and workmanship under normal use. Please refer to the official Sealey webVoor de volledige algemene voorwaarden kunt u de website of uw aankoopdocumentatie raadplegen.

Figure 3: Sealey 1 Year Guarantee. This image indicates the product is covered by a one-year warranty, with terms and conditions applying.

For technical support, warranty claims, or to purchase genuine replacement parts, please contact Sealey customer service through their official channels. Always provide your product model number (SA2) and proof of purchase when seeking support.

Contactgegevens: Please visit the official Sealey website voor de meest actuele contactgegevens en ondersteuningsbronnen.