Hunter 27183 Wall Control with Preset Instruction Manual

Invoering

This manual provides detailed instructions for the installation, operation, and maintenance of your Hunter 27183 Traditional Wall Control with Preset. Please read these instructions carefully before installation and use to ensure proper function and safety.

The Hunter 27183 wall control is designed to provide four fan speeds and full-range light dimming for your ceiling fan. It includes a preset feature to control fan and light operation at desired settings.

Veiligheidsinformatie

• Always disconnect power at the circuit breaker or fuse box before beginning installation or performing any maintenance.
• Installation must be performed by a qualified electrician or in accordance with local electrical codes.
• Zorg ervoor dat alle bedradingsverbindingen veilig en goed geïsoleerd zijn.
• Do not exceed the specified electrical ratings: Fan 1.6 Amps, Light 300 Watts.
• This control is designed for indoor use only.

Inhoud van het pakket

Controleer of alle componenten aanwezig zijn voordat u met de installatie begint:

• Hunter 27183 Wall Control Unit
• Installatiemateriaal (schroeven, draadmoeren)
• Gebruiksaanwijzing

Note: A rocker switchplate is not included and must be purchased separately.

Instellen en installeren

The Hunter 27183 wall control is designed for installation in a standard three-wire, single box wall switch. Professional installation is recommended.

1. Schakel de stroom uit: Before starting, ensure power is disconnected at the circuit breaker or fuse box to avoid electrical shock.
2. Bestaande schakelaar verwijderen: Carefully remove the existing wall switch from the wall box. Disconnect the wires, noting their connections.
3. Draadverbindingen: Connect the wires from the wall box to the Hunter 27183 wall control according to the wiring diagram provided with the unit. Typically, this involves connecting the Line (hot) wire, Load (fan/light) wires, and Ground wire. Ensure all connections are secure using wire nuts.
4. Mount Control: Gently push the wired control into the wall box. Secure the control to the wall box using the provided screws.
5. Install Switchplate: Attach a compatible rocker switchplate (not included) over the control.
6. Herstel de stroom: Schakel de stroom weer in via de stroomonderbreker of de zekeringkast.

Figuur 1: Voorzijde view of the Hunter 27183 Wall Control, showing the fan speed and light dimmer sliders.

Figuur 2: Zijkant view of the Hunter 27183 Wall Control, illustrating the compact design for in-wall installation.

Gebruiksaanwijzing

The Hunter 27183 wall control features separate sliders for fan speed and light dimming, along with a preset function.

• Ventilatorsnelheidsregeling: Use the fan slider to select one of the four available fan speeds. Move the slider up for higher speeds and down for lower speeds.
• Licht dimmen: Use the light slider to adjust the brightness of your ceiling fan light. Move the slider up to increase brightness and down to dim the light.
• Preset Feature: The control includes a preset function. Once you have set your desired fan speed and light level, you can use the main rocker switch (if present on your switchplate) to turn the fan and light on/off at these preset settings without readjusting the sliders.

General Ceiling Fan Operation

Understanding how your ceiling fan operates in different seasons can help optimize comfort and energy savings when used with your Hunter wall control.

Figure 3: In summer, set your ceiling fan blades to rotate counter-clockwise. This creates a downward airflow, producing a wind-chill effect that can make a room feel cooler, allowing you to set your thermostat higher.

Figure 4: In winter, set your ceiling fan blades to rotate clockwise at a low speed. This draws warm air trapped near the ceiling down into the living space, helping to warm the room and potentially lowering heating costs.

Onderhoud

The Hunter 27183 wall control requires minimal maintenance.

• Schoonmaak: To clean the surface of the control, wipe with a soft, damp doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen. Zorg ervoor dat de stroom is uitgeschakeld voordat u gaat reinigen.
• Inspectie: Periodically check the control for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

Probleemoplossing

If you experience issues with your Hunter 27183 wall control, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, contact Hunter customer support or a qualified electrician.

Specificaties

Garantie-informatie

The Hunter 27183 Wall Control is covered by a 1 jaar fabrieksgarantie Vanaf de aankoopdatum. Deze garantie dekt materiaal- en fabricagefouten bij normaal gebruik. Bewaar uw aankoopbewijs voor garantieclaims.

For full warranty terms and conditions, please refer to the official Hunter webwebsite of neem contact op met de klantenservice.

Klantenservice

If you have any questions, require assistance with installation, or need to make a warranty claim, please contact Hunter customer support.

• Webwebsite: Visit the official Hunter Fan Company website voor veelgestelde vragen, ondersteuningsbronnen en contactgegevens.
• Telefoon: Refer to the packaging or Hunter's website voor telefoonnummers van klantenservice.