1. Inleiding
This manual provides comprehensive service and workshop instructions for the Yanmar Marine Diesel Engines models 3YM30, 3YM20, and 2YM15. It is intended for qualified personnel performing maintenance, repair, and overhaul procedures. Adherence to the guidelines within this manual is crucial for ensuring the safe, efficient, and long-term operation of your engine.
Image: Front cover of the service manual, displaying 'YANMAR MARINE DIESEL ENGINE 3YM30/3YM20/2YM15 SERVICE MANUAL' and 'maritime press' logo.
2. Initial Setup and Pre-Operation Checks
Before operating the engine after any service, repair, or initial installation, it is imperative to perform a series of pre-operation checks to ensure all systems are functioning correctly and safely. This section outlines critical steps.
2.1. Fluid Level Verification
- Motorolie: Check the engine oil level using the dipstick. Ensure it is between the 'MIN' and 'MAX' marks. Add recommended oil if necessary.
- Koelmiddel: Verify the coolant level in the expansion tank. It should be at the specified level. Top up with appropriate coolant mixture if low.
- Brandstof: Confirm sufficient fuel in the tank and check for any air in the fuel lines, bleeding if required.
2.2. System Integrity Check
- Slangen en Clamps: Inspect all hoses for cracks, wear, or leaks. Ensure all clampzijn strak en veilig.
- Riemen: Verify the tension and condition of all drive belts (e.g., alternator, raw water pump).
- Elektrische aansluitingen: Check battery terminals and all electrical connections for corrosion and tightness.
3. Bedrijfsrichtlijnen
While this manual primarily focuses on service, understanding proper operating procedures is vital for engine health and longevity. Always refer to the engine's dedicated operator's manual for detailed instructions.
3.1. De motor starten
- Ensure the transmission is in neutral.
- Turn the ignition key to the 'ON' position and wait for pre-heat indicators (if applicable) to extinguish.
- Turn the key to 'START' and release once the engine fires. Do not crank for more than 10 seconds at a time.
3.2. Engine Monitoring During Operation
- Continuously monitor engine temperature, oil pressure, and charging voltage.
- Luister naar ongebruikelijke geluiden of trillingen.
- Observe exhaust for abnormal smoke color.
4. Onderhoudsprocedures
Regular and timely maintenance is critical for the optimal performance and extended lifespan of your Yanmar marine diesel engine. This section outlines key maintenance tasks.
4.1. Routine Checks (Daily/Before Operation)
- Controleer het motoroliepeil.
- Controleer het koelvloeistofpeil.
- Check raw water strainer for debris.
- Inspect drive belts for tension and condition.
- Look for any signs of fuel, oil, or coolant leaks.
4.2. Scheduled Maintenance Intervals
The following table provides a general guide for scheduled maintenance. Always refer to the specific service schedule provided by Yanmar for your engine model.
| Interval | Taak | Notities |
|---|---|---|
| Elke 50 uur / jaarlijks | Motorolie en filter verversen | Use recommended oil type. |
| Elke 100 uur / jaarlijks | Inspect fuel filter / water separator | Drain water/sediment. Replace if necessary. |
| Elke 250 uur / jaarlijks | Replace fuel filter element | Ensure proper bleeding after replacement. |
| Every 500 Hours / Bi-annually | Inspect/Adjust valve clearances | Requires specialized tools and knowledge. |
| Every 1000 Hours / 5 Years | Koelvloeistof vervangen | Flush system thoroughly. |
5. Problemen met veelvoorkomende problemen oplossen
This section provides a guide to diagnosing and resolving common operational issues with your Yanmar marine diesel engine. For complex problems, consult an authorized service technician.
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Motor start niet | Batterij bijna leegtage Geen brandstof Lucht in brandstofsysteem Defecte startmotor | Batterij opladen Brandstofpeil controleren Ontlucht het brandstofsysteem Inspect/replace starter |
| Motor oververhit | Laag koelvloeistofniveau Clogged raw water strainer Defecte thermostaat Impeller wear | Koelvloeistof bijvullen Schone zeef Test/replace thermostat Replace raw water pump impeller |
| Overmatige rook | Zwarte rook: Overloading, dirty injectors Blauwe rook: Burning oil Witte rook: Unburnt fuel, water in combustion | Reduce load, clean injectors Check oil level, engine wear Check fuel quality, head gasket |
| Verlies van vermogen | Verstopt brandstoffilter Air intake restriction Injector issues | Brandstoffilter vervangen Check air filter, intake Inspect/service injectors |
6. Technische specificaties
The following table provides key technical specifications for the Yanmar Marine Diesel Engines covered by this manual. Note that specific details may vary slightly between models (3YM30, 3YM20, 2YM15).
| Specificatie | Detail |
|---|---|
| ASIN | 3954275082 |
| Uitgever | Europaischer Hochschulverlag Gmbh & Co. Kg |
| Publicatiedatum | 29 mei 2012 |
| Taal | Duits (originele editie) |
| Afdruklengte | 248 pagina's |
| ISBN-10 | 9783954275083 |
| ISBN-13 | 978-3954275083 |
| Artikelgewicht | 15.8 ons |
| Afmetingen | 7.44 x 0.52 x 9.69 inch |
| Best Sellers Rank (Ships) | 5477 |
7. Garantie en ondersteuning
This service manual focuses on technical procedures and does not contain specific warranty information for Yanmar marine diesel engines. For details regarding your engine's warranty coverage, please refer to the original purchase documentation or contact an authorized Yanmar dealer or service center.
For technical support, parts inquiries, or to locate an authorized service provider, please visit the official Yanmar Marine website or consult your local dealer. Always provide your engine's model and serial number when seeking support.
