CRAFTSMAN Select 24" Two-Stage Snow Blower (Model 31AS6K1EB93) Instruction Manual

1. Inleiding

This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your CRAFTSMAN Select 24" Two-Stage Snow Blower, Model 31AS6K1EB93. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The CRAFTSMAN Select 24 is equipped with a 208cc 4-cycle OHV engine and features a 24-inch clearing width and 20-inch intake height. It includes a push-button electric start, self-propelled drive with 6 forward and 2 reverse speeds, and 12-inch sawtooth steel augers for effective snow and ice removal. The 200-degree chute rotation allows for controlled snow discharge up to 40 feet.

Figure 1: CRAFTSMAN Select 24" Two-Stage Snow Blower, Model 31AS6K1EB93. This image shows the complete snow blower from a front-side angle, highlighting its red body, black engine, and large wheels.

2. Veiligheidsinformatie

WARNING: Read and understand all safety warnings and instructions before operating this snow blower. Failure to follow these instructions may result in serious injury or death.

Potential hazards associated with snow blowers include rotating parts, carbon monoxide poisoning from gasoline models, and the need for appropriate personal protective equipment (PPE) such as gloves and eye protection. Always adhere to manufacturer guidelines for handling, operation, and storage.

Algemene veiligheidsregels:

• Always wear appropriate eye and hearing protection.
• Houd handen, voeten en kleding uit de buurt van bewegende delen.
• Never operate the snow blower indoors or in poorly ventilated areas due to carbon monoxide risk.
• Ensure the area to be cleared is free of obstacles before starting.
• Laat kinderen of ongetrainde personen de machine niet bedienen.
• Turn off the engine and disconnect the spark plug wire before performing any maintenance or clearing clogs.
• Vul de tank bij in een goed geventileerde ruimte, met de motor uit en koel.

3. Opstelling en montage

Your snow blower may require some assembly upon arrival. Refer to the separate assembly guide for detailed instructions. Key steps typically include:

1. Stuurmontage: Attach the upper handlebar to the lower handlebar using the provided hardware. Ensure all cables and wires are routed correctly and not pinched.
2. Glijbaanconstructie: Secure the discharge chute and its rotation mechanism. Verify smooth operation of the chute control lever.
3. Skid Shoes Adjustment: Adjust the poly skid shoes to the desired height. For most conditions, set them slightly below the auger housing to prevent scraping the surface.
4. Vloeistofcontroles:
   • Motorolie: Check the engine oil level and fill with recommended oil (refer to engine manual for type and capacity).
   • Brandstof: Fill the fuel tank with fresh, unleaded gasoline. Do not mix oil with gasoline.

Figure 2: Product dimensions of the CRAFTSMAN Select 24" Snow Blower. This image illustrates the overall length (44.75"), width (26.75"), and height (32.8") of the unit, useful for planning storage and transport.

4. Gebruiksaanwijzing

4.1. Checklist vóór de operatie

• Zorg ervoor dat alle moeren, bouten en schroeven goed vastzitten.
• Check engine oil and fuel levels.
• Inspect the area for debris that could be thrown by the auger.
• Verify that the discharge chute is clear and properly aimed.

4.2. De motor starten

The CRAFTSMAN Select 24 features a push-button electric start, eliminating the need for manual pull-starting.

1. Sluit stroom aan: Plug an extension cord into the electric start receptacle on the engine.
2. Prime Engine: Press the primer bulb 3-5 times (more if temperature is below 0°F).
3. Verstikking instellen: Beweeg de chokehendel naar de stand "FULL CHOKE".
4. Begin: Press and hold the electric start button until the engine starts (maximum 5 seconds).
5. Stroom loskoppelen: Once the engine starts, release the button and unplug the extension cord.
6. Choke afstellen: Gradually move the choke lever to the "RUN" position as the engine warms up.

Figure 3: Detail of the push-button electric start mechanism. This image shows the electric start receptacle and the red push-button, simplifying engine ignition in cold weather.

Figure 4: Close-up of the fuel cap and primer bulb. This image highlights the components used for fueling and priming the engine before starting.

4.3. Bedienen van de sneeuwblazer

The snow blower features a self-propelled drive system with multiple speeds and adjustable chute control.

• Schakel rijden in: Squeeze the drive control lever to engage the self-propelled wheels.
• Selecteer snelheid: Use the speed selector lever to choose from 6 forward and 2 reverse speeds. Adjust speed based on snow depth and density.
• Schakel de grondboor in: Squeeze the auger control lever to activate the augers and impeller.
• Adjust Chute: Use the chute control crank to rotate the discharge chute up to 200 degrees, directing snow away from cleared areas. The durable steel chute can throw snow up to 40 feet.

Figure 5: Detail of the chute control mechanism. This image shows the crank used to adjust the direction of snow discharge, offering up to 200 degrees of rotation.

Figure 6: The 12-inch sawtooth auger actively clearing snow. This image demonstrates the snow blower's capability to cut through and clear heavy snow and ice.

Figure 7: A person operating the CRAFTSMAN Select 24" Snow Blower to clear a driveway. This image shows the snow blower in action, demonstrating its ease of use and effective snow removal.

4.4. De motor stoppen

To stop the engine, release both the drive control lever and the auger control lever. Then, move the engine switch to the "OFF" position.

5. Onderhoud

Regular maintenance ensures optimal performance and extends the life of your snow blower.

5.1. Na elk gebruik

• Clear any snow or ice from the auger housing and discharge chute.
• Wipe down the exterior of the machine.
• Controleer op losse bevestigingsmiddelen.

5.2. Seasonal Maintenance

• Motorolie verversen: Vervang de motorolie na de eerste 5 bedrijfsuren, daarna iedere 25 bedrijfsuren of jaarlijks.
• Bougie: Controleer en reinig of vervang de bougie jaarlijks.
• Brandstofsysteem: At the end of the season, drain the fuel tank or use a fuel stabilizer to prevent fuel degradation. Run the engine until it runs out of fuel if not using a stabilizer.
• Smering: Lubricate all moving parts as indicated in the full owner's manual.
• Skid Shoes and Scraper Bar: Controleer op slijtage en vervang indien nodig.

5.3. Opslag

When storing the snow blower for extended periods:

• Maak de machine grondig schoon.
• Perform all seasonal maintenance.
• Store in a dry, protected area, away from direct sunlight and extreme temperatures.
• Ensure the fuel tank is either empty or filled with stabilized fuel.

6. Probleemoplossing

In dit gedeelte worden veelvoorkomende problemen besproken. Voor complexere problemen kunt u het beste een gekwalificeerde servicemonteur raadplegen.

7. Specificaties

8. Garantie en ondersteuning

The CRAFTSMAN Select 24" Two-Stage Snow Blower (Model 31AS6K1EB93) comes with a drie jaar beperkte garantie. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official CRAFTSMAN webplaats.

For technical assistance, parts, or warranty claims, please contact CRAFTSMAN customer support. Contact information can typically be found on the CRAFTSMAN webop de site of in de verpakkingsmaterialen.

Fabrikant: MTD-producten