OLIXIS C-6002-BN-EUG-2 Home Office Desk Chair Instruction Manual

1. Inleiding

Thank you for choosing the OLIXIS Home Office Desk Chair. This manual provides detailed instructions for the assembly, operation, and maintenance of your new chair. Please read this manual thoroughly before assembly and retain it for future reference to ensure safe and efficient use of the product.

OLIXIS Home Office Desk Chair, front view

Figuur 1: Voorzijde view of the OLIXIS Home Office Desk Chair.

2. Veiligheidsinformatie

Volg altijd de meegeleverde montage-instructies.
Overschrijd het aanbevolen maximale gewicht van 136 kg (300 pond) niet.
Keep the chair away from heat sources and sharp objects to prevent damage to the upholstery.
Zorg ervoor dat alle schroeven en bouten goed vastzitten voor gebruik. Controleer ze regelmatig en draai ze indien nodig opnieuw vast.
Vermijd het om op de stoel te staan of deze als opstapje te gebruiken.
Laat kinderen niet zonder toezicht op of rond de stoel spelen.
In case of any doubt, consult this user manual or contact customer support.

3. Inhoud van het pakket

Controleer of alle onderdelen aanwezig zijn voordat u met de montage begint. Neem contact op met de klantenservice als er onderdelen ontbreken of beschadigd zijn.

Backrest (A) x1
Seat Cushion (B) x1
Footrest (C) x1
Mechanism (D) x1
Backrest Support Bracket (E) x1
Gas Lift (F) x1
Base (G) x1
Casters (H) x5
Lumbar Pillow (I) x1
Armrests (O) x2
Footrest Support Bars (P) x2
Montagemateriaal (schroeven, inbussleutel)

Video showing the unboxing and display of all chair components.

Video 1: Unboxing and component display. This video demonstrates all parts included in the package.

4. Opstelling en montage

Follow these steps to assemble your OLIXIS Home Office Desk Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

Stap 1: Bevestig de wielen aan de basis.

Insert the five casters (H) into the holes at the end of each leg of the chair base (G). Push firmly until they click into place.

Step 2: Install Gas Lift

Place the gas lift (F) into the center hole of the assembled base (G).

Stap 3: Bevestig de armleuningen aan het zitkussen.

Align the armrests (O) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the armrests are oriented correctly (left and right).
Secure the armrests using the provided screws and Allen wrench. Do not overtighten.

Step 4: Attach Footrest to Seat Cushion

Attach the footrest support bars (P) to the underside of the seat cushion (B) using the provided screws.
Slide the footrest (C) onto the support bars.

Step 5: Install Mechanism to Seat Cushion

Align the mechanism (D) with the pre-drilled holes on the underside of the seat cushion (B). Ensure the front of the mechanism faces the front of the seat.
Secure the mechanism using the provided screws and Allen wrench.

Stap 6: Bevestig de rugleuning aan het zitkussen.

Attach the backrest support bracket (E) to the backrest (A) using the provided screws.
Align the backrest support bracket (E) with the corresponding holes on the mechanism (D) and secure with screws.

Stap 7: Bevestig de stoelconstructie aan de gaslift

Carefully place the assembled seat and backrest onto the gas lift (F), ensuring the gas lift cylinder is properly inserted into the mechanism.

Step 8: Attach Lumbar Pillow

Attach the detachable lumbar pillow (I) to the backrest using its integrated straps. Adjust to your preferred height.

Video demonstrating the full assembly process of the office chair.

Video 2: Full assembly guide. This video provides a visual walkthrough of the entire chair assembly.

5. Gebruiksaanwijzing

Your OLIXIS Home Office Desk Chair offers multiple adjustment features for personalized comfort.

5.1. Hoogteverstelling

To raise the seat height: While seated, pull the right lever (under the seat) upwards and lift your body slightly. Release the lever at the desired height.
To lower the seat height: While seated, pull the right lever upwards and apply pressure to the seat. Release the lever at the desired height.

5.2. Ligfunctie

To recline the backrest: Pull the left lever (under the seat) outwards to unlock the recline mechanism. Lean back to your desired angle (up to 135°). Push the lever inwards to lock the backrest in position.
To adjust rocking tension: Rotate the round knob under the seat to increase or decrease the tension for rocking.

5.3. Voetsteunbediening

To extend the footrest: Pull the footrest (C) outwards from under the seat.
To retract the footrest: Push the footrest (C) back under the seat until it is fully stored.

5.4. Lumbar Pillow Adjustment

The lumbar pillow (I) is detachable and can be adjusted vertically along the backrest using its straps to provide support where needed.

Diagram showing various adjustable features of the chair including detachable lumbar support, thickened seat, retractable footrest, and sturdy metal base.

Figuur 2: Overview of adjustable features.

Diagram illustrating ergonomic support points of the chair for head, shoulder, waist, hip, and leg, with a person reclining in the chair.

Figure 3: Ergonomic support points and reclining posture.

Three images showing the chair in different usage scenarios: working, gaming, and resting with the footrest extended.

Figure 4: Chair in working, gaming, and resting positions.

6. Onderhoud

Proper maintenance will extend the life and appearance of your chair.

Schoonmaak: The PU leather upholstery and detachable pillow can be cleaned with a soft, damp doek. Gebruik voor hardnekkige vlekken een milde zeepoplossing en veeg direct droog. Vermijd agressieve chemicaliën of schurende reinigingsmiddelen.
Hardware: Controleer regelmatig alle schroeven en bouten om er zeker van te zijn dat ze goed vastzitten. Draai ze indien nodig opnieuw aan om de stabiliteit en veiligheid te waarborgen.
Wielen: Houd de wielen vrij van haar en ander vuil om een soepele beweging te garanderen.
Algemene zorg: Vermijd langdurige blootstelling aan direct zonlicht om verkleuring en materiaaldegradatie te voorkomen.

Van dichtbij view of the chair's material layers, highlighting spring cushion, breathable leather, and waterproof easy-to-wipe surface.

Figure 5: Material details, showing breathable and easy-to-clean surfaces.

7. Probleemoplossing

Als u problemen ondervindt met uw stoel, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:

De stoel wiebelt: Zorg ervoor dat alle montageschroeven goed vastzitten. Controleer of de gasveer correct in de basis en het mechanisme is geplaatst.
Hoogteverstelling werkt niet: Verify that the gas lift lever is functioning correctly and not obstructed. Ensure the gas lift is fully inserted into the mechanism and base.
Wielen rollen niet soepel: Check casters for any trapped debris, hair, or dust. Clean as necessary. Ensure casters are fully inserted into the base.
Recline mechanism stuck: Ensure the recline lock lever is fully disengaged. Check for any obstructions under the seat mechanism.

Voor aanhoudende problemen of problemen die hier niet worden vermeld, kunt u contact opnemen met de klantenservice.

8. Specificaties

Functie	Specificatie
Merk	OLIXIS
Modelnummer	C-6002-BN-EUG-2
Kleur	Pu-brown
Materiaal	Faux Leather, Sponge (Fill Material), Metal (Frame)
Productafmetingen (D x B x H)	31.5"D x 27.6"B x 45.7"H (80 cm x 70 cm x 116 cm)
Artikelgewicht	58.2 pond (26.4 kg)
Maximaal gewichtsadvies	300 pond (136 kg)
Verstelbare functies	Adjustable Backrest (up to 135°), Adjustable Height, Foot Rest, Rolling, Upholstered Leather
Achterkant Stijl	Doorlopende achterkant
Arm stijl	Fixed armrest
Beenstijl	Wheels (Mute PU casters)
Certificeringen	SGS certified Class 3 gas cylinder, BIFIMA certified metal base

Image showing the solid base of the chair with a 300 lbs load capacity label.

Figure 6: Solid base with 300 lbs load capacity.

Image showing the gas cylinder for smooth height adjustment.

Figure 7: Gas cylinder for smooth height adjustment.

Image showing mute PU casters for shock-absorbing, non-slip 360° smooth movement.

Figure 8: Mute PU casters for smooth movement.

9. Garantie en ondersteuning

Your OLIXIS Home Office Desk Chair is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical assistance, missing parts, or warranty claims, please contact OLIXIS customer support through the retailer where the product was purchased or visit the official OLIXIS webwebsite voor contactgegevens.

When contacting support, please have your model number (C-6002-BN-EUG-2) and proof of purchase readily available.