Gebruikershandleiding ACTBEST Race elektrische fiets

1. Inleiding

Thank you for choosing the ACTBEST Race Electric Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride and keep it for future reference. Proper understanding and adherence to these instructions will ensure optimal performance and longevity of your e-bike.

2. Veiligheidsrichtlijnen

Your safety is paramount. Always wear a helmet and appropriate safety gear when riding. Familiarize yourself with local traffic laws and regulations regarding electric bicycles. Perform a pre-ride inspection before each use.

• Gebruik van helm: Draag altijd een goedgekeurde helm.
• Verkeersregels: Obey all local traffic laws, signs, and signals.
• Controle vóór de rit: Controleer vóór elke rit de bandenspanning, de werking van de remmen, de acculading en zorg ervoor dat alle snelspanners en bevestigingsmiddelen goed vastzitten.
• Weersomstandigheden: Exercise caution when riding in wet conditions, as braking distance may increase.
• Nachtrijden: Use headlights and taillights when riding in low-light conditions.
• Gewichtslimiet: Overschrijd het aanbevolen maximumgewicht van 330 kilo niet.
• Batterijveiligheid: Only use the provided charger. Do not expose the battery to extreme temperatures or puncture it.

3. Inhoud van het pakket

Controleer bij het uitpakken of alle onderstaande artikelen aanwezig zijn:

• 1 x ACTBEST Race Electric Bike (partially assembled)
• 1 x acculader
• 1 x Installatiegereedschapset
• 1 x Gebruikershandleiding
• Batterij (vooraf geïnstalleerd of apart)

4. Montage-instructies

The ACTBEST Race Electric Bike comes partially assembled. Follow these steps carefully for complete assembly. For a visual guide, please refer to the assembly video below.

4.1. Stuurmontage

1. Use the provided tools to loosen the screws on the stem.
2. Turn the stem to the correct riding position and securely tighten the screws.
3. Remove the front cover of the stem.
4. Carefully place the handlebar into position, ensuring all cables are free and not pinched.
5. Reattach the front cover and tighten the screws evenly to secure the handlebar.

4.2. Montage van het voorwiel

1. Remove the protective screw and plastic cap from the front fork.
2. Carefully lift the front of the bike and align the front wheel with the fork dropouts, ensuring the brake rotor slides into the brake caliper.
3. Insert the quick-release skewer through the wheel hub.
4. Tighten the quick release nut and close the lever firmly.

4.3. Headlights and Taillights Installation

1. Attach the headlight to the designated mounting point on the front fork using the provided bracket and tools.
2. Attach the taillight to the seat post or rear rack (if applicable) using its mounting mechanism.

4.4. Seat Post and Saddle Installation

1. Insert the seat post with the saddle attached into the frame's seat tube.
2. Adjust the seat height to a comfortable and safe riding position.
3. Secure the seat post by closing the quick-release lever firmly. Ensure the minimum insertion mark on the seat post is not visible.

4.5. Pedaalinstallatie

Note: Pedals are marked 'L' for left and 'R' for right. The right pedal tightens clockwise, and the left pedal tightens counter-clockwise.

1. Identify the 'R' pedal and thread it into the right crank arm (chain side) clockwise. Tighten with a wrench.
2. Identify the 'L' pedal and thread it into the left crank arm counter-clockwise. Tighten with a wrench.

4.6. Reflector Installation

1. Attach the front reflector to the front of the bike, typically on the handlebars or front fork.
2. Attach the rear reflector to the seat post or rear rack.
3. Attach wheel reflectors to the spokes of both wheels.

4.7. Batterij installeren en activeren

1. If the battery is separate, insert it into the frame's battery compartment.
2. Gebruik de sleutel om de batterij stevig vast te zetten.
3. Press the power button on the battery to activate it.

Afbeeldingbeschrijving: A fully assembled ACTBEST Race Electric Bike, white in color, showcasing its mountain bike design with front suspension, disc brakes, and integrated battery.

5. Gebruiksaanwijzing

5.1. In-/uitschakelen en weergave

1. Ensure the battery is locked and powered on.
2. Press and hold the power button on the handlebar display to turn on the e-bike system.
3. The display will show speed, battery level, assist level, and other ride data.
4. To power off, press and hold the power button on the display again.

5.2. Rijmodi

Your ACTBEST Race Electric Bike offers multiple riding modes for a customizable experience:

• Trapondersteuningsmodus (PAS): Provides electric assistance as you pedal. Adjust the assist level (1-5) using the '+' and '-' buttons on the display. Higher levels provide more assistance.
• Throttle-Only Mode: Engages the motor without pedaling. Use the thumb throttle to control speed.
• Handmatige modus: Berijd de fiets zoals een traditionele fiets, zonder elektrische ondersteuning.
• Loopmodus: Provides low-speed assistance (typically up to 6 km/h) to help push the bike while walking. Activate via the display.

Afbeeldingbeschrijving: An illustrative image depicting the three primary riding modes: Pedal Assist, Manual, and Throttle-only, with a cyclist riding an e-bike on varied terrain.

5.3. Schakelen

The bike is equipped with a Shimano 21-speed gear system. Use the shifters on the handlebars to change gears according to terrain and desired effort. Shift smoothly to avoid strain on the drivetrain.

5.4. Remsysteem

The ACTBEST Race features dual disc brakes for reliable stopping power. Apply both front and rear brakes simultaneously for effective and controlled deceleration. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.

Afbeeldingbeschrijving: Een gedetailleerde view of the 27.5-inch wider tire and disc brake system, emphasizing its design for stability, traction, comfort, and shock absorption.

6. Onderhoud

Regelmatig onderhoud is cruciaal voor de prestaties en veiligheid van uw e-bike.

• batterij zorg: Charge the battery regularly, even when not in use, to maintain its health. Store in a cool, dry place. Avoid fully discharging the battery.
• Bandenspanning: Check tire pressure before each ride. Maintain pressure within the range indicated on the tire sidewall.
• Remmeninspectie: Regularly check brake pads for wear and ensure brake levers are responsive. Adjust or replace as needed.
• Kettingsmering: Houd de ketting schoon en gesmeerd om ervoor te zorgen dat de versnellingen soepel verlopen en om slijtage te voorkomen.
• Bevestigingsmiddelen: Controleer regelmatig of alle bouten, moeren en snelspanners nog goed vastzitten.
• Schoonmaak: Maak je e-bike schoon met adamp doek. Vermijd het direct met hogedrukspuiten van elektrische componenten.

7. Probleemoplossing

This section addresses common issues you might encounter with your ACTBEST Race Electric Bike.

If you encounter issues not listed here or cannot resolve a problem, please contact ACTBEST customer support.

8. Specificaties

Key technical specifications for the ACTBEST Race Electric Bike:

Afbeeldingbeschrijving: Een zijproffile of the ACTBEST Race Electric Bike with key dimensions labeled, including overall length, height, seat height, handlebar width, suggested rider height range, and maximum load capacity.

9. Garantie en ondersteuning

The ACTBEST Race Electric Bike comes with a limited warranty. For specific warranty details, registration, or to obtain technical support, please refer to the warranty card included with your purchase or visit the official ACTBEST website. For any inquiries, contact ACTBEST customer service.