SmallRig FreeSpeed Heavy Duty Carbon Fiber Video Tripod

Invoering

Thank you for choosing the SmallRig FreeSpeed Heavy Duty Carbon Fiber Video Tripod, Model 5443. This manual provides detailed instructions for the proper assembly, operation, and maintenance of your tripod to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Wat zit er in de doos?

Controleer bij het uitpakken of alle componenten aanwezig zijn:

• Statief x 1
• Inbussleutel x 1
• Opbergtas x 1 "
• Telefoon Clamp 1x
• Garantiekaart x 1

Producteigenschappen

• Single-Action Leg Adjustment: The tripod features a one-step leg deployment knob for quick and efficient height adjustments, streamlining setup for various shooting scenarios.

  

• 73" / 186cm Tall Video Tripod: Offers a height adjustment range from 34 inches (85 cm) to 73 inches (186 cm) to accommodate diverse shooting requirements. The tripod folds to a compact 35 inches (88 cm) for convenient storage and transport in the included carrying bag.

  

• Lightweight Carbon Fiber Construction: Constructed from durable carbon fiber with a 2-2-1 segmented leg design, the tripod system weighs only 3.4 kg (7.5 lb). It supports a maximum load of 10 kg (22.05 lb). The 75mm bowl base is compatible with most standard tripod heads.

  

  

• Fluid Head with Damping-aanpassing: The professional video fluid head features a +90° / -70° tilt damping adjustment knob, enabling precise control for various camera weights and ensuring smooth, cinematic camera movements. It is compatible with Manfrotto quick release plates for rapid camera attachment.

  

  

• Swivel-Foot Design: The tripod legs are equipped with anti-detachment swivel feet for enhanced stability on uneven surfaces. These feet are detachable and can be switched between horseshoe and threaded feet. The quick release plate includes 1/4" and 3/8" top screws for broad compatibility with DSLR cameras, mirrorless cameras, camcorders, telescopes, and sliders.

Installatie-instructies

1. Uitpakken: Haal alle onderdelen voorzichtig uit de verpakking. Bewaar de verpakking voor toekomstige opslag of transport.
2. Fluid Head Attachment: The fluid head is typically pre-attached. If not, align the fluid head with the 75mm bowl base on the tripod and secure it firmly.
3. De benen strekken:
   • Locate the one-step leg deployment knob on each leg.
   • Rotate the knob to the "Release" position to extend the leg sections.
   • Adjust each leg to the desired height.
   • Rotate the knob to the "Lock" position to secure the leg at the chosen height. Ensure all legs are securely locked before mounting equipment.
4. Voeten aanpassen: The tripod comes with swivel feet. For different terrains, you can detach these and replace them with horseshoe or threaded feet if desired. Ensure feet are securely attached.
5. De camera monteren:
   • Zoek de snelkoppelingsplaat op de vloeistofkop.
   • Press the QD Plate Release Button and slide the quick release plate out.
   • Attach the quick release plate to your camera using the appropriate 1/4" or 3/8" screw. Ensure it is tightened securely.
   • Slide the camera with the attached quick release plate back into the fluid head until it clicks into place. Verify it is locked by gently attempting to lift the camera.

Gebruiksaanwijzing

1. Pan- en tilt-aanpassingen:
   • To pan (horizontal movement), loosen the Pan Locking Knob. Adjust to the desired position and tighten the knob to secure.
   • To tilt (vertical movement), loosen the Tilt Locking Knob. Adjust to the desired angle (+90° to -70°) and tighten the knob to secure.
2. DampControle: The fluid head features a tilt damping adjustment knob. Rotate this knob to increase or decrease the resistance of the tilt movement, allowing for smoother or faster camera movements depending on your needs.
3. Gebruik van snelwisselplaten: For quick camera changes, use the QD Plate Release Button to disengage the quick release plate. Always ensure the plate is fully engaged and locked before leaving the camera unattended.
4. Adjusting Leg Angles: Each leg can be independently adjusted for angle to adapt to uneven terrain. Ensure the leg deployment knob is securely locked after adjustment.

Onderhoud

• Schoonmaak: Wipe the tripod down with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp Maak de doek schoon met milde zeep en droog hem daarna grondig af. Vermijd agressieve chemicaliën of schurende materialen.
• Smering: The fluid head is factory-lubricated. Do not attempt to disassemble or lubricate the fluid head yourself, as this may void the warranty and damage the mechanism.
• Inspecties: Regularly check all knobs, screws, and leg locks for tightness. Tighten any loose components using the provided Allen wrench.
• Opslag: When not in use, collapse the tripod legs fully and store it in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.
• Vervoer: Always use the storage bag for transport to protect the tripod from scratches and impacts.

Probleemoplossing

If you encounter issues with your SmallRig FreeSpeed Tripod, refer to the following common solutions:

If troubleshooting steps do not resolve the issue, please contact SmallRig customer support for further assistance.

Specificaties

Garantie-informatie

SmallRig products are designed for durability and performance. For detailed warranty terms and conditions, including coverage period and claims process, please refer to the official SmallRig website or the warranty card included with your product. Retain your proof of purchase for warranty service.

Klantenservice

For technical assistance, product inquiries, or to report any issues, please visit the official SmallRig weblocatie bij www.smallrig.com. You can find FAQs, support resources, and contact information for their customer service team there.