VEICHI AC10 Series Frequency Converter User Manual

1. Inleiding

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the VEICHI AC10 series frequency converters. Please read this manual thoroughly before using the product to ensure proper handling and to prevent damage or injury.

The VEICHI AC10 series frequency converters are designed for general-purpose applications, offering reliable motor control and energy efficiency. This manual covers models such as AC10-T/S2-R75G-B-220V, AC10-T/S2-1R5G-B-220V, AC10-T/S2-2R2G-B-220V, AC10-T3-R75G-B-380V, and AC10-T3-1R5G-B-380V.

2. Veiligheidsmaatregelen

Always observe the following safety precautions to prevent electric shock, fire, or personal injury. Failure to comply may result in severe consequences.

• Gekwalificeerd personeel: Installation, wiring, operation, and maintenance must be performed by qualified electrical personnel only.
• Stroomonderbreking: Always disconnect all power sources before performing any wiring or maintenance. Wait at least 5 minutes after power off for the capacitor discharge indicator to extinguish.
• Aarding: Ensure the frequency converter is properly grounded according to local electrical codes.
• Omgevingsomstandigheden: Do not operate the converter in environments exceeding specified temperature, humidity, or dust levels.
• Beschermhoezen: Do not remove protective covers or touch internal components while power is applied.

3. Product voorbijview

The VEICHI AC10 series frequency converter features a compact design with an integrated control panel for easy operation and monitoring.

Figuur 3.1: Voorzijde view of the VEICHI AC10 Frequency Converter. This image displays the main unit, highlighting the digital display for parameters, control buttons for programming and operation, and the various terminal blocks for power and control wiring. A screwdriver is visible in the side compartment.

3.1. Indeling van het bedieningspaneel

The control panel consists of a digital display and several function buttons:

• Weergave: Shows operational parameters, fault codes, and programming values.
• PRG (programma): Gaat naar/verlaat de parameterinstelmodus.
• OMHOOG/OMLAAG-pijlen: Navigate through parameters, adjust values.
• RENNEN: Start de motor.
• STOP/RESET: Stops the motor, resets fault conditions.
• SET/SHIFT: Confirms parameter settings, shifts cursor during input.

4. Installatie en installatie

4.1. Montage

Mount the frequency converter vertically on a flat, non-flammable surface. Ensure adequate ventilation space around the unit (at least 10 cm above and below, 5 cm on sides) for heat dissipation.

4.2. Bedrading

Refer to the wiring diagram provided with your specific model for detailed connections. General wiring guidelines:

• Power Input (R, S, T or L1, L2): Connect to the main power supply. Ensure correct voltage (220V or 380V depending on model).
• Motorvermogen (U, V, W): Sluit aan op de motoraansluitingen.
• Grond (PE): Connect to a reliable ground point.
• Controleterminals: For external control signals (e.g., start/stop, speed reference, fault output).

Warning: Incorrect wiring can lead to severe damage to the unit or personal injury. Consult a qualified electrician if unsure.

5. Gebruiksaanwijzing

5.1. Eerste inschakeling

1. After completing all wiring, apply power to the frequency converter.
2. The display will light up, typically showing "0.00" or a default frequency.

5.2. Basic Operation (Keypad Control)

1. Frequentie instellen: Druk op de PRG button to enter parameter mode. Navigate to the frequency setting parameter (e.g., F0.01) using the OMHOOG/OMLAAG pijlen. druk op SET/SHIFT to edit, adjust value, then SET/SHIFT again to confirm. Press PRG om weg te gaan.
2. Startmotor: Druk op de LOOP button. The motor will accelerate to the set frequency.
3. Motor stoppen: Druk op de STOPPEN/RESETTEN knop. De motor zal vertragen en stoppen.

5.3. Parameterinstellingen

The AC10 series has a comprehensive set of parameters for various functions. Refer to the detailed parameter list in the full product manual for advanced configurations (e.g., acceleration/deceleration times, motor parameters, control modes).

Exampbestandsparameters:

• F0.00: Run command source (keypad, terminal, communication)
• F0.01: Frequency setting source (keypad, analog input, communication)
• F0.03: Maximale uitgangsfrequentie
• F0.04: Versnellingstijd
• F0.05: vertragingstijd

6. Onderhoud

Regular maintenance ensures the longevity and reliable operation of your frequency converter.

• Schoonmaak: Periodically clean the cooling fins and fan to prevent dust accumulation, which can hinder heat dissipation. Use compressed air or a soft brush. Ensure power is off before cleaning.
• Terminalcontrole: Annually check all wiring terminals for tightness. Loose connections can cause overheating or intermittent operation.
• Milieucheck: Controleer of de bedrijfsomgeving binnen de gespecificeerde temperatuur- en vochtigheidsbereiken blijft.
• Ventilatorvervanging: Cooling fans have a limited lifespan. Consider replacing them every 3-5 years, depending on operating conditions, to maintain optimal cooling.

7. Probleemoplossing

This section provides common issues and their potential solutions. For complex problems, contact technical support.

To reset a fault, press the STOPPEN/RESETTEN button after resolving the cause.

8. Specificaties

The following specifications are typical for the VEICHI AC10 series. Specific values may vary slightly by model.

Note: For precise specifications of your specific model, refer to the product label or the comprehensive technical datasheet.

9. Garantie en ondersteuning

9.1. Garantie-informatie

This product is typically covered by a manufacturer's warranty against defects in materials and workmanship for a period specified at the time of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or operation outside of specified environmental conditions.

For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller.

9.2. Technische ondersteuning

If you encounter issues that cannot be resolved using the troubleshooting guide, or require further technical assistance, please contact your supplier or the manufacturer's authorized service center.

Wanneer u contact opneemt met de klantenservice, houd dan de volgende informatie bij de hand:

• Product Model Number (e.g., AC10-T/S2-1R5G-B-220V)
• Serial Number (if applicable)
• Aankoopdatum
• Detailed description of the problem, including any fault codes displayed.