Light My Bricks 2.0holidaymainstreet-10308

Gebruiksaanwijzing voor de Light My Bricks 2.0-verlichtingsset voor LEGO Holiday Main Street #10308

Invoering

This manual provides detailed instructions for the installation, operation, and maintenance of your Light My Bricks 2.0 Light Kit, specifically designed for the LEGO Holiday Main Street #10308 set. This kit enhances your LEGO model with custom lighting, bringing a festive and vibrant display to life. Please read all instructions carefully before beginning the installation process.

Veiligheidsinformatie

Waarschuwing: Verstikkingsgevaar - kleine onderdelen. Niet geschikt voor kinderen jonger dan 3 jaar.

Always handle components with care. Ensure all connections are secure to prevent damage. Do not attempt to modify the lighting components, as this may void your warranty and create safety risks.

Wat is inbegrepen

Your Light My Bricks 2.0 Light Kit for LEGO Holiday Main Street #10308 includes the following components:

  • 11 x Lampen
  • 8 x Riemen
  • 4 x Dokken
  • 1 x Flux Power
  • 5 x Accessoires
  • 9 x Diverse stenen

Controleer of alle onderdelen aanwezig en onbeschadigd zijn voordat u met de installatie verdergaat.

Instellen en installeren

This light kit is designed to illuminate your LEGO Holiday Main Street #10308 set after it has been fully built. It is not intended for installation during the initial LEGO construction process.

For a comprehensive and detailed installation guide, please refer to the 3D interactive instructions provided by Light My Bricks. You can access these instructions by scanning the QR code located on the side of your product box.

Stroomvereisten: The light kit requires power from a USB Power Bank or a USB Wall Adaptor. These power sources are niet inbegrepen with the kit and must be acquired separately.

Fully illuminated LEGO Holiday Main Street set with toy shop, music shop, tram, and Christmas tree.

Image: The LEGO Holiday Main Street #10308 set fully illuminated by the Light My Bricks 2.0 Light Kit, showcasing the toy shop, music shop, tram, and Christmas tree with various lights.

The installation process involves carefully integrating the lighting components into your pre-built LEGO model. Follow the 3D guide step-by-step to ensure correct placement of Micro Meteor LEDs, Astro Warm White lights, and multi-colored LEDs for the Christmas tree and tram.

Close-up of an installed light strip inside a LEGO building, showing wiring and brick integration.

Afbeelding: Een close-up view of an installed light strip within a LEGO building, demonstrating how the wiring and lighting components integrate seamlessly with the bricks.

Gebruiksaanwijzing

Once the light kit is fully installed and all connections are secure, connect the USB cable from the Flux Power component to a compatible USB Power Bank or USB Wall Adaptor. The lights in your LEGO Holiday Main Street #10308 set will then illuminate, bringing your model to life.

Close-up of the illuminated LEGO tram with interior and exterior lights.

Afbeelding: Een gedetailleerde view of the LEGO tram, showcasing its illuminated interior and functional front and rear lights, enhancing its realistic appearance.

To turn off the lights, simply disconnect the USB power source.

Onderhoud

  • Schoonmaak: Use a soft, dry cloth to gently dust the light components and wires. Avoid using liquids or abrasive cleaners.
  • Behandeling: Always handle the light kit components and wires with care to prevent damage. Avoid sharp bends or excessive pulling on the wires.
  • Opslag: If disassembling the kit for storage, ensure components are stored in a dry, cool place, protected from dust and physical damage.

Probleemoplossing

  • Verlichting werkt niet:
    • Zorg ervoor dat de USB-voeding correct is aangesloten en werkt.
    • Check all connections between the light components and the Flux Power unit.
    • Verify that individual lights are securely attached and not damaged.
  • Flikkerende lichten:
    • Controleer of de verbindingen loszitten.
    • Ensure the power source provides sufficient and stable power.
  • Gedimd licht:
    • Confirm the power source is adequate.
    • Controleer of er geen draden bekneld of beschadigd zijn.

If you continue to experience issues, please refer to the official Light My Bricks support resources or contact customer service.

Specificaties

Productafmetingen5.7 x 4.5 x 1.9 inch
Artikelgewicht4.8 ons
Artikelmodelnummer2.0holidaymainstreet-10308
FabrikantSteek mijn stenen aan
Aanbevolen leeftijd12 jaar en ouder

Garantie en ondersteuning

Voor informatie over productgarantie, retouren of technische ondersteuning kunt u terecht op de officiële website van Light My Bricks. webwebsite of neem rechtstreeks contact op met hun klantenservice. Bewaar uw aankoopbewijs als aankoopbewijs.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.