Micsig High Voltage Gebruikershandleiding voor de differentiële probe DP/DP-serie

1. Inleiding

This manual provides detailed instructions for the safe and effective use of the Micsig DP/DP Series High Voltage Differential Probes. These probes are designed for measuring high voltage differential signals with oscilloscopes, offering features such as low noise floor, excellent high-voltage amplitude-frequency characteristics, and industry-leading common mode rejection capability.

The DP/DP Series probes are built with cutting-edge SigOFIT technology, ensuring high accuracy, excellent bandwidth flatness, and low noise performance. They feature a BNC interface and Type-C power input for versatile connectivity.

2. Inhoud van het pakket

Verify that all items listed below are present in your package. If any items are missing or damaged, contact Micsig support.

Micsig High Voltage Differential Probe DP/DP Series complete package contents

Afbeelding 2.1: The complete package contents of the Micsig High Voltage Differential Probe DP/DP Series, including the probe unit, input leads, power adapter, and USB-C cable.

Hoge Voltage Differential Probe Unit
Input Test Leads (Red and Black)
Alligator Clips (Red and Black)
USB Type-C-voedingskabel
Stroomadapter
Gebruikershandleiding (dit document)

3. Productcomponenten

Familiarize yourself with the main components of the differential probe.

Van dichtbij view of the Micsig High Voltage Differential Probe unit

Afbeelding 3.1: Een close-up view of the Micsig High Voltage Differential Probe unit, showing the main body, input terminals, and output BNC connector.

Gedetailleerd view of the Micsig High Voltage Differential Probe controls

Afbeelding 3.2: Gedetailleerd view of the Micsig High Voltage Differential Probe's output section, highlighting the BNC Interface, 5MHz Bandwidth Limit button, Quick Zero button, and Dual Range Selection button.

Probe Unit: The main body containing the differential amplifier circuit.
Ingangsklemmen: Connect the test leads to these terminals (red for positive, black for negative).
BNC Interface: Connects the probe output to the oscilloscope input.
5MHz Bandwidth Limit Button: (Available on 100MHz-200MHz versions, except DP7000) Limits the bandwidth to 5MHz for noise reduction when measuring lower frequency signals.
Quick Zero Button: Used to quickly zero the probe's output offset.
Dual Range Selection Button: Toggles between different attenuation ranges (e.g., 50X, 500X) to accommodate various input voltage-niveaus.
Type-C-stroominvoer: For connecting the USB Type-C power cable.

4. Installatie-instructies

Stroomaansluiting: Connect the USB Type-C power cable to the probe unit and the power adapter. Plug the power adapter into a suitable power outlet.
Aansluiting van de oscilloscoop: Connect the BNC interface of the differential probe to an input channel of your oscilloscope using a BNC cable.
Input Lead Connection: Attach the red and black test leads to the corresponding input terminals on the differential probe. Ensure a secure connection.
Attaching Probes to Circuit: Connect the alligator clips or other appropriate accessories to the test leads. Carefully attach the red clip to the positive test point and the black clip to the negative test point of the circuit under test.
Inschakelen: Ensure the oscilloscope is powered on and configured for the appropriate input settings (e.g., 1MΩ input impedance).

Afbeelding 4.1: The Micsig High Voltage Differential Probe connected to an oscilloscope, demonstrating a typical setup for differential voltagDe metingen.

5. Gebruiksaanwijzing

5.1. Powering On and Initial Check

Once connected, the probe's power indicator LED should illuminate. Before making measurements, perform a quick zero adjustment.

5.2. Quick Zero Adjustment

With the input leads disconnected from any circuit, press the Quick Zero button on the probe unit. This calibrates the probe to output zero volts when no differential voltage is present, ensuring accurate measurements.

5.3. Range Selection

De Dual Range Selection button allows you to switch between different attenuation ratios (e.g., 50X, 500X). Select the appropriate range based on the expected voltage of the signal you are measuring. A higher attenuation ratio is used for larger input voltagen.

Lower Attenuation (e.g., 50X): For smaller differential voltages, providing higher sensitivity.
Higher Attenuation (e.g., 500X): For larger differential voltages, preventing saturation and ensuring safe operation.

5.4. Bandwidth Limit (Optional)

For models that support it (100MHz-200MHz versions, except DP7000), the 5MHz Bandwidth Limit button can be pressed to reduce the probe's bandwidth to 5MHz. This is useful for reducing high-frequency noise when measuring lower frequency signals, improving signal clarity on the oscilloscope.

5.5. Metingen uitvoeren

After selecting the appropriate range and performing a quick zero, connect the probe leads to the desired test points on the circuit. Observe the waveform on the oscilloscope. Adjust the oscilloscope's vertical scale and time base as needed to properly display the signal.

6. Onderhoud

Schoonmaak: Keep the probe unit and accessories clean. Use a soft, dry cloth to wipe surfaces. Do not use abrasive cleaners or solvents.
Opslag: Store the probe in a dry, dust-free environment when not in use. Protect the BNC connector and input terminals from damage.
Kabelonderhoud: Avoid sharp bends or kinks in the cables. Inspect cables regularly for signs of wear or damage.
Kalibratie: While the Quick Zero function provides on-demand calibration, periodic professional calibration may be required for applications demanding the highest accuracy. Refer to Micsig's official support for calibration services.

7. Probleemoplossing

Probleem	Mogelijke oorzaak	Oplossing
No signal on oscilloscope	Probe not powered on. Incorrect BNC connection. Oscilloscope input settings incorrect. Probe leads not properly connected to circuit.	Check power indicator LED and power supply. Ensure BNC cable is securely connected to both probe and oscilloscope. Verify oscilloscope channel is enabled and input impedance is 1MΩ. Ensure test leads are firmly attached to the probe and the circuit.
Noisy or unstable signal	Incorrect range selected. External electromagnetic interference. Probe not properly zeroed.	Select a higher attenuation range if the signal is too large, or a lower range for better sensitivity. Ensure proper grounding and minimize proximity to strong electromagnetic fields. Perform a Quick Zero adjustment. Consider using the 5MHz bandwidth limit if available and appropriate for the signal frequency.
Probe power LED off	Stroomkabel losgekoppeld of defect. De voedingsadapter is defect.	Check USB Type-C cable connection and try a different cable. Try a different power adapter or USB power source.

8. Specificaties

The following table details the technical specifications for the Micsig DP/DP Series High Voltage Differential Probes.

Table of specifications for Micsig DP/DP Series High Voltage Differentiële sondes

Afbeelding 8.1: Detailed specifications table for various models within the Micsig DP/DP Series, including Bandwidth, Differential Voltage (DC+AC PK), CMRR, and Input Impedance.

Note: Specific models may have variations in performance. Refer to the table for details. When placing orders, please handle them according to the new model numbers.

Fabrikant: Shenzhen Micsig Technologie Co., Ltd.
Model Number (DP703): SM-DP703
Pakket afmetingen: Ongeveer 11.02 x 9.45 x 3.15 inch
Gewicht: Ongeveer 2.2 pond
Datum eerste beschikbaarheid: 13 september 2024

9. Garantie en ondersteuning

Micsig products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Micsig webwebsite of neem contact op met uw lokale distributeur.

Voor de meest actuele informatie en ondersteuningsbronnen kunt u terecht op de volgende website: Micsig Official Store on Amazon of de fabrikant webplaats.

Micsig SM-DP703