Gebruikershandleiding voor de Wokyo TF-100 elektrische scooter gashendel met 6-pins waterdicht LCD-display

1. Inleiding

This manual provides essential instructions for the installation, operation, and maintenance of your Wokyo TF-100 Electric Scooter Throttle with 6-Pin Waterproof LCD Display. This device integrates throttle control and a display unit, designed for compatibility with various electric scooters that utilize Protocol 2, including models like Kugoo M4, Kugoo Pro, Vsett, Kaabo, and Dualtron. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Afbeelding 1.1: voorbijview of the Wokyo TF-100 Electric Scooter Throttle with integrated LCD display and 6-pin connector.

2. Producteigenschappen

• Geïntegreerd ontwerp: Combines thumb throttle control and an LCD display into a single unit, simplifying scooter controls.
• Duidelijk LCD-scherm: Provides real-time data including speed, battery level, distance traveled, and other essential riding information.
• Ergonomic Thumb Control: Allows for easy and precise acceleration and speed adjustment with a simple thumb movement.
• Waterdichte constructie: Equipped with a waterproof plug and durable design to ensure reliable performance in various weather conditions.
• Brede compatibiliteit: Designed for electric scooters using Protocol 2, such as Kugoo M4, Kugoo Pro, Vsett, Kaabo, and Dualtron.

3. Installatie en installatie

The Wokyo TF-100 throttle is designed for straightforward installation. Follow these steps carefully:

1. Compatibiliteitscontrole: Before installation, verify that your electric scooter's controller uses Protocol 2. This throttle is specifically compatible with TF-100 system scooters. Incompatibility may prevent the device from functioning correctly.
2. Montage: Securely attach the throttle unit to your scooter's handlebars using the provided mounting hardware. Ensure it is positioned comfortably for thumb operation and that the display is clearly visible.
3. Bedrading Aansluiting: Connect the 6-pin waterproof plug from the throttle to the corresponding port on your electric scooter's wiring harness. Ensure the connection is firm and secure. Refer to the wiring diagram below for pin assignments.

Image 3.1: Detailed 6-pin wiring diagram. Pin assignments are: Red (+) for positive power, Black (-) for negative power, HALL Blue, RT Green, XT Yellow, and DS White for signal and data lines.

Image 3.2: The TF-100 throttle unit mounted on an electric scooter's handlebars, showing its position relative to other controls.

Image 3.3: Important warning indicating that this product is only compatible with TF-100 system scooters. Users should verify their system before purchase.

4. Gebruiksaanwijzing

Once installed and connected, operating the TF-100 throttle is intuitive:

1. Aan/uit: Press and hold the power button (usually marked with a power symbol) to turn the display and throttle system on or off.
2. Versnelling: Use the thumb lever to control acceleration. Pushing the lever forward will increase speed. Release the lever to reduce speed or coast.
3. Modusknop: The "MODE" button allows you to cycle through different display modes or settings, such as trip distance, total odometer, or other parameters depending on your scooter's controller.
4. LCD-scherminformatie:
   • Snelheid: Geeft de huidige rijsnelheid weer (km/u of mph).
   • Batterijniveau: Geeft de resterende acculading aan.
   • Afstand: Shows trip distance (TRIP) and potentially total odometer (ODO).
   • Versnelling/Modus: May indicate the current power assist level or riding mode.

Afbeelding 4.1: Een close-up view of the TF-100 LCD display, illustrating the various data points such as speed, battery charge, and trip distance.

5. Onderhoud

The Wokyo TF-100 throttle is designed for durability and minimal maintenance. Adhere to the following guidelines:

• Schoonmaak: Veeg het display en de gashendel schoon met een zachte, droge doek.amp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the screen or housing.
• Waterbestendigheid: The unit features a waterproof plug and is designed to withstand moisture. However, avoid submerging the unit in water or exposing it to high-pressure water jets.
• Verbindingscontrole: Periodically inspect the 6-pin connector for any signs of wear, corrosion, or loose connections. Ensure it remains securely plugged in.
• Opslag: When not in use for extended periods, store the scooter and its components in a dry, cool environment away from direct sunlight.

6. Probleemoplossing

If you encounter issues with your TF-100 throttle, consider the following:

• No Power/Display Not Lighting Up:
  • Zorg ervoor dat de hoofdschakelaar van de scooter aan staat.
  • Check the 6-pin connection for proper seating and any visible damage.
  • Controleer of de accu van de scooter voldoende is opgeladen.
• Gaspedaal reageert niet:
  • Confirm the 6-pin connection is secure.
  • Recheck compatibility: This throttle requires your scooter's controller to use Protocol 2. If your scooter uses a different protocol (e.g., a Jetson Haze e-bike, as noted in some user experiences), this throttle will not function.
  • Inspect the throttle lever for any physical obstructions or damage.
• Onnauwkeurige weergavewaarden:
  • Zorg ervoor dat alle verbindingen goed vast zitten.
  • If speed or distance readings are incorrect, consult your scooter's main controller manual for calibration procedures, if available.

If problems persist after following these steps, please contact Wokyo customer support for further assistance.

7. Specificaties

8. Garantie en ondersteuning

For warranty information or technical support, please contact Wokyo customer service. Keep your purchase receipt as proof of purchase. Contact details can typically be found on the product packaging or the official Wokyo webplaats.