1. Inleiding
Thank you for choosing the XCQQ S8L-Elongated Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: The XCQQ S8L-Elongated Bidet Toilet Seat, featuring a side control panel and a self-cleaning nozzle.
2. Belangrijke veiligheidsinformatie
Please read all safety warnings and instructions carefully to reduce the risk of fire, electric shock, or injury.
- Elektrische vereisten: This unit operates on 120 Volts and requires a 1300-watt power supply. Ensure the electrical outlet is a B-type US style with a ground plug and is GFCI (Ground Fault Circuit Interrupter) protected. Do not use extension cords.
- Watervoorziening: Connect the bidet seat only to a potable cold water supply. Ensure all connections are secure to prevent leaks.
- Gewichtslimiet: The maximum weight capacity for this bidet toilet seat is 280 pounds. Exceeding this limit may cause damage or injury.
- Let op: deksel kan beschadigd raken. The toilet seat lid is designed for soft closing and is not intended to support body weight. Avoid sitting or standing on the lid to prevent damage.
- Schoonmaak: Always unplug the unit before cleaning. Use only mild, non-abrasive cleaners.
- Kinderen en personen met een beperking: Dit apparaat kan worden gebruikt door kinderen van 8 jaar en ouder en personen met verminderde fysieke, sensorische of mentale vermogens of gebrek aan ervaring en kennis als ze toezicht of instructies hebben gekregen over het gebruik van het apparaat op een veilige manier en de gevaren begrijpen. Kinderen mogen niet met het apparaat spelen. Reiniging en gebruikersonderhoud mogen niet door kinderen worden uitgevoerd zonder toezicht.
3. Inhoud van het pakket
Controleer of alle componenten aanwezig zijn voordat u met de installatie begint:
- XCQQ Bidet Toilet Seat
- 3-way Valve + DMT Pipe (Pre-Installed)
- Bevestigingsplaat
- Mounting Hardware (screws, rubber expansion nuts)
- Gebruiksaanwijzing (dit document)
4. Producteigenschappen
The XCQQ S8L-Elongated Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:
- Wassen met warm water: Adjustable water temperature with 5 settings, ranging from room temperature to 102°F (39°C).
- Verwarmde stoel: Provides warmth with 4 adjustable temperature levels, from room temperature up to 102°F (39°C).
- Warme luchtdroger: Features an efficient air drying system with 5 adjustable temperature settings to reduce toilet paper usage.
- Zachtsluitend deksel: Voorkomt dichtslaan en vermindert geluid.
- Nachtlampje: Integrated LED night light for visibility in low-light conditions, with a beep-off mode to avoid disturbance.
- Zelfreinigend mondstuk: A stainless steel nozzle that performs self-cleaning before and after each use.
- Led scherm: Real-time display of water temperature, seat temperature, and drying temperature.
- Memory Customized Settings: The unit retains your preferred settings for water pressure, water temperature, drying temperature, nozzle position, and heated toilet seat temperature level (settings may need to be re-memorized after a power outagen).
- Multiple Cleaning Styles: Includes Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self-Cleaning functions.
Image 4.1: Illustration of the heated toilet seat and warm air drying functions.
Image 4.2: Depiction of the soft-close lid mechanism and the integrated LED night light.
Image 4.3: Visual representation of the various cleaning modes, including female, rear, oscillating, and self-cleaning.
5. Installatiehandleiding
Before installation, ensure your toilet is an elongated shape and has an accessible electrical outlet. Refer to Image 5.1 to confirm your toilet size.
Image 5.1: Toilet size confirmation diagram for elongated and round models, highlighting the requirement for an electrical outlet.
Controle vóór installatie:
- Sluit de watertoevoer naar uw toilet af.
- Spoel het toilet door om de stortbak leeg te laten lopen.
- Verwijder de bestaande toiletbril en -deksel.
Stap-voor-stap installatie:
- Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
Image 5.2: Removing the fixing plate from the bidet seat.
- Secure Fixing Plate: Insert the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate onto the toilet bowl.
Image 5.3: Securing the fixing plate to the toilet bowl.
- Attach Bidet Unit: Push the bidet unit into the secured fixing plate while holding down the buckle until the plate slides completely into the bottom of the unit.
Image 5.4: Attaching the bidet unit to the fixing plate.
- Watertoevoer aansluiten: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the bidet's water hose to the 3-way valve.
Image 5.5: Connecting the bidet to the toilet's water supply.
- Herstel de water- en stroomvoorziening: Open the main water supply valve. Wait 3-5 minutes for the bidet to fill with water. Then, plug the unit into a GFCI-protected electrical outlet.
Initial Power-On and Water Spray Check:
When the power is activated, the LED light will start to blink. The spray bar will automatically extend (without spraying water) and water will flow down the bar into the toilet. This is a system self-check. The blue light will stop blinking in approximately 1 minute automatically.
If the LED light blinks continuously for more than 5 minutes:
- Unplug the bidet.
- Draai de waterkraan dicht.
- Wacht 3-5 minuten.
- Plug it back in and do not operate any functions. The blue light should stop blinking in 1 minute.
Image 5.6: Important attention notice for initial power-on and LED light behavior.
6. Bediening
The XCQQ S8L-Elongated Bidet Toilet Seat is controlled via a side panel. Familiarize yourself with the buttons and their functions:
Afbeelding 6.1: Gedetailleerd view of the side control panel, indicating various function buttons.
Functies van het bedieningspaneel:
- Stroom: Zet het apparaat aan/uit.
- Stop: Stops any active washing or drying function.
- Spuiten: Initiates a general wash.
- Bidet: Initiates a feminine wash.
- Turbowasstraat: Provides a stronger, more focused wash.
- Drogen: Activeert de heteluchtdroger.
- Auto: Starts an automatic washing and drying cycle with a single touch.
- Licht: Toggles the LED night light on/off.
- Water Pressure / Drying Temp (HI/LO): Adjusts water pressure during wash or air temperature during drying.
- Spuitmondpositie (FR/BK): Adjusts the nozzle's forward or backward position.
- Watertemperatuur: Regelt de watertemperatuur.
- Stoeltemperatuur: Hiermee kunt u de temperatuur van de stoelverwarming aanpassen.
- Geheugen: Saves current settings for personalized use.
Image 6.2: The LED display provides real-time information, and the 'Auto' button initiates a combined wash and dry cycle.
7. Onderhoud
Regelmatig schoonmaken:
- Mondstukreiniging: The stainless steel nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning, a manual nozzle cleaning function may be available via the control panel (refer to specific button if present).
- Eenheidsreiniging: Always unplug the bidet toilet seat from the electrical outlet before cleaning. Use a soft, damp cloth and a mild, non-abrasive household cleaner. Avoid harsh chemicals, abrasive pads, or strong solvents, as these can damage the surface.
- Seat Removal for Cleaning: The bidet seat can be unclipped from the fixing plate for thorough cleaning of the toilet bowl and the underside of the seat. Refer to the installation steps in reverse to remove and reattach the seat.
- Buitenkant: Wipe down the exterior surfaces, including the control panel, with a soft, damp lap.
Lange termijn opslag:
If the unit will not be used for an extended period, especially in cold climates, it is recommended to drain the water from the unit to prevent freezing damage. Consult a qualified plumber if you are unsure how to perform this task.
8. Probleemoplossing
In dit gedeelte worden veelvoorkomende problemen besproken. Als het probleem aanhoudt, neem dan contact op met de klantenservice.
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Geen stroom / Apparaat gaat niet aan | Unit unplugged; GFCI tripped; Power outage. | Ensure the unit is securely plugged into a GFCI outlet. Reset the GFCI if tripped. Check household power supply. |
| LED light blinks continuously for more than 5 minutes after power-on | Initial water fill incomplete or system error. | Unplug the bidet, turn off the water valve, wait 3-5 minutes, then plug it back in without operating functions. The light should stop blinking within 1 minute. Ensure water supply is fully open. |
| No water spray / Weak water pressure | Water supply valve closed; Nozzle clogged; Water pressure setting too low. | Ensure the toilet's water supply valve is fully open. Check for any kinks in the water hose. Clean the nozzle if visibly clogged. Adjust water pressure settings on the control panel. |
| Heated seat not warm / Water not warm | Temperature settings too low; Power save mode active. | Adjust seat and water temperature settings on the control panel. Disable power save mode if applicable. |
| Air dryer not working / Air too hot | Drying function not activated; Temperature setting incorrect. | Activate the drying function. Adjust the drying temperature settings on the control panel. |
| Lid closes too quickly / Does not stay open | Onjuiste installatie of uitlijning. | Recheck the installation of the fixing plate and bidet unit to ensure proper alignment and secure attachment. |
9. Specificaties
| Functie | Detail |
|---|---|
| Merk | XCQQ |
| Modelnummer | XCQQ-S8L |
| Stijl | S8L-Elongated (Panel Control) |
| Kleur | Wit |
| Materiaal | Acrylonitril-butadieen-styreen (ABS) |
| Vorm | Ovaal |
| Productafmetingen | 20.1 x 17.5 x 5.5 inch |
| Artikelgewicht | 12.27 pond |
| Energiebron | AC |
| Deeltage | 120 Volt |
| Wattage | 1300 watt |
| Temperature Range (Water/Seat) | 59 - 95 Degrees Fahrenheit (Adjustable up to 102°F / 39°C) |
| Maximale draagkracht | 280 pond |
| Plug formaat | B - Amerikaanse stijl met aardingsstekker |
10. Garantie en ondersteuning
Garantie-informatie: Please refer to the product packaging or the official XCQQ webRaadpleeg de website voor gedetailleerde garantievoorwaarden. Bewaar uw aankoopbewijs voor garantieclaims.
Klantenservice: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XCQQ customer support through the retailer where the product was purchased or visit the official XCQQ brand webplaats.
