1. Inleiding
The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.
Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.
2. Product voorbijview
2.1 Belangrijkste kenmerken
- Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
- Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
- Duidelijke weergave: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
- Eenvoudige bediening: Simple one-button operation for power on and measurement.
- Comfortabel ontwerp: Fingertip clip made with silica gel material for comfort.
- Lange batterijduur: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.
2.2 Wat zit er in de doos?
- CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
- Draagkoord
- Gebruiksaanwijzing
- Cartoon Stickers
- Schroevendraaier (voor het batterijcompartiment)
2.3 Productcomponenten
This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.
3. Instellen
3.1 Batterij installatie
- Locate the battery compartment on the back of the oximeter.
- Gebruik de meegeleverde schroevendraaier om de schroef op het batterijklepje los te draaien.
- Schuif het batterijklepje eraf.
- Plaats twee AAA-batterijen (niet meegeleverd) in het batterijcompartiment en let daarbij op de juiste polariteit (+/-).
- Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.
This image demonstrates the battery installation process and subsequent steps for taking a measurement.
3.2 Het koord bevestigen
Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.
This image shows the device dimensions and how to attach the included lanyard.
4. Gebruiksaanwijzing
4.1 Een meting uitvoeren
- Ensure the oximeter has batteries installed.
- Open de clip van de oximeter.
- Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
- Press the power button once to turn on the oximeter.
- Keep your hand still and avoid movement during the measurement.
- The SpO2 and pulse rate readings will appear on the display within a few seconds.
4.2 Schermoriëntatie
The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.
This image demonstrates the rotatable display feature of the oximeter.
4.3 Automatisch uitschakelen
The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.
5. Weergave-informatie
The TFT display provides the following information:
- SpO2 (%): Zuurstofverzadigingsniveau in het bloed.
- PRbpm: Hartslag in slagen per minuut.
- Staafdiagram: A visual representation of pulse strength.
- Pulsgolfvorm: A graphical representation of the pulse.
- Indicator voor lage batterij: An icon indicating when batteries need replacement.
This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.
6. Onderhoud en verzorging
6.1 Cleaning the Oximeter
- Clean the surface of the oximeter before and after each use with a soft cloth dampAfgewerkt met medicinale alcohol (70% ethanol of isopropanol).
- Dompel het apparaat niet onder in water of andere reinigingsoplossingen.
- Zorg ervoor dat het apparaat volledig droog is voordat u het opnieuw gebruikt.
6.2 Batterij vervangen
When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.
6.3 Opslag
Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.
7. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Geen weergave na inschakelen | Batterijen zijn leeg of niet goed geplaatst. | Vervang de batterijen of plaats ze terug met de juiste polariteit. |
| Display shows '---' or unstable readings | Vinger niet goed ingebracht; overmatige beweging; koude vinger; nagellak. | Reinsert finger correctly; remain still; warm the finger; remove nail polish. |
| Toestel schakelt automatisch uit | Normal auto-off function (5 seconds inactivity) or low battery. | This is normal behavior. If unexpected, check battery level. |
| Difficulty opening battery cover | Screw is too tight or cover is stiff. | Use the provided screwdriver. Apply gentle, even pressure to slide the cover after unscrewing. |
8. Specificaties
- Productafmetingen: 2.32 x 1.42 x 1.38 inch
- Artikelgewicht: 3.52 ons
- Measuring Range SpO2: 70-100%
- Measuring Range Pulse Rate: 0-250 slagen per minuut
- Levensduur batterij: Ongeveer 20-30 uur
- Energiebron: 2 x AAA-batterijen (niet inbegrepen)
- Automatische uitschakeling: Na 5 seconden inactiviteit
- Fabrikant: Contec Medical Systems Co.,Ltd
9. Veiligheidsinformatie
- This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
- Do not use the oximeter during sports activities, as movement can affect accuracy.
- Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
- Stel het apparaat niet bloot aan direct zonlicht, hoge temperaturen of vocht.
- Probeer het apparaat niet zelf te repareren of aan te passen. Neem contact op met de ondersteuning als er problemen optreden.
10. Ondersteuningsinformatie
For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:
- Telefoon voor technische ondersteuning: +86-335-8015431
- E-mailadres: contecmed@contecmed.com.cn
- Webwebsite: http://www.contecmed.com
Please refer to the official CONTEC webRaadpleeg de website of uw aankoopdocumentatie voor de specifieke garantievoorwaarden.