1. Overview
The waveshare FT232RNL USB to RS232/485/422/TTL Interface Converter is an industrial-grade isolated converter designed for reliable and stable communication across various serial interfaces. It leverages an original FT232RNL chip for superior performance and compatibility. This device is engineered with multiple protection features to ensure safe and durable operation in diverse environments.
Figure 1: waveshare FT232RNL USB to RS232/485/422/TTL Interface Converter
2. Kenmerken
- Original FT232RNL Chip: Ensures fast, stable, and reliable communication with enhanced compatibility.
- Multi-Interface Conversion: Supports USB to RS232, USB to RS485, USB to RS422, and USB to TTL.
- Unibody Power Supply Isolation: Provides stable isolated voltage without requiring external power for the isolated terminal.
- Unibody Digital Isolation: Allows signal isolation, offering high reliability, strong anti-interference, and low power consumption.
- TVS (voorbijgaande voltage Suppressor): Effectively suppresses surge voltage en tijdelijke piek voltage, providing lightningproof and ESD protection.
- Self-Recovery Fuse & Protection Diodes: Ensures stable current/voltage-uitgangen, die overstroom-/overspanningsbeveiliging biedentage proof and improved shock resistance.
- Automatic Transceiver Circuit: Fully automatic, no-delay transceiver circuit for fast and stable communication without interference.
- TTL Serial 3.3V/5V Voltage Translator: Configurable TTL level via switch.
- LED-indicatoren: Drie LED's geven de stroomtoevoer (PWR) en de status van de transceiver (TXD, RXD) aan.
- Connectoren van hoge kwaliteit: Durable USB-B and RS232 connectors for smooth plug/pull.
- Industrial-Grade Metal Case: Supports wall-mount and rail-mount installations, providing a solid and aesthetically pleasing-ontwerp.
Figure 2: Internal Design and Protection Features
3. Pakket Inhoud:
Het productpakket bevat doorgaans de volgende artikelen:
- waveshare FT232RNL USB to RS232/485/422/TTL Interface Converter
- USB-A naar USB-B-kabel
- Schroevendraaier
- Montagebeugels (voorgemonteerd of los)
Afbeelding 3: Inhoud van de verpakking
4. Instellen
To set up your waveshare FT232RNL converter, follow these general steps:
- Verbinding maken met de host: Use the provided USB-A to USB-B cable to connect the converter's USB-B port to a USB port on your computer (PC, Mac, Linux, Android device).
- Stuurprogramma-installatie: For most modern operating systems (Windows, Linux, Mac, Android), the necessary drivers for the FT232RNL chip should install automatically upon connection. If not, drivers can be obtained from the FTDI website or waveshare's official support page.
- Select TTL Level (if applicable): If using the TTL interface, adjust the 3.3V/5V voltage translator switch on the converter to match the voltage level of your target device.
- Seriële apparaat aansluiten: Connect your RS232, RS485, RS422, or TTL serial device to the corresponding screw terminals or DB9 connector on the converter. Ensure correct pin assignments (refer to Section 6: Interface Introduction).
- Controleer de verbinding: The PWR LED on the converter should illuminate when connected to a powered USB port. The TXD and RXD LEDs will flash during data transmission.
Video 1: Demonstrates the connection and various interface conversions of the waveshare USB to RS232/485/422/TTL converter.
5. In bedrijf
Once the converter is set up and connected, it operates as a transparent bridge between your USB host and the connected serial device. The onboard automatic transceiver circuit manages data flow without manual intervention.
LED-indicatoren:
- PWR (Rood): Indicates power. Lights up when the USB connection is established and voltage wordt gedetecteerd.
- TXD (Green): Transmit Data Indicator. Lights up when the USB port sends data.
- RXD (Green): Receive Data Indicator. Lights up when the device ports send data back.
To communicate with your serial device, use appropriate serial communication software on your computer. Configure the software with the correct COM port (assigned by your operating system), baud rate, data bits, parity, and stop bits to match your serial device's settings.
6. Interface-introductie
The converter provides multiple interfaces for versatile connectivity:
Figuur 4: Overview of Converter Interfaces
RS232 Pinout (DB9 Male):
| PIN | Beschrijving |
|---|---|
| 2 | Receiving data (RXD) |
| 3 | Sending data (TXD) |
| 5 | Massa GND |
| 1, 4, 6, 7, 8, 9 | N/C (Not Connected) |
RS485/RS422 Pinout (Screw Terminal):
| Screw Terminal (PIN) | Beschrijving |
|---|---|
| PE | 485/422 signal ground |
| TA | RS422 send differential signal positive / RS485 differential signal positive A+ |
| TB | RS422 send differential signal negative / RS485 differential signal negative B- |
| RA | RS422 receive differential signal positive |
| RB | RS422 receive differential signal negative |
TTL (UART) Pinout (Screw Terminal):
| Screw Terminal (PIN) | Beschrijving |
|---|---|
| TXD | TTL transmit data pin, connect to MCU.RXD |
| RXD | TTL receive data pin, connect to MCU.TXD |
| GND | Verbinden met GND |
| VCC | 5V / 3.3V power supply output, configurable via 5V/3.3V level switch |
Figure 5: Detailed Pinouts
7. Specificaties
| Categorie | Specificatie |
|---|---|
| Producttype | Industrial grade digital isolated converter |
| Bedrijfsvolumetage | 5V (USB) / 3.3V / 5V (TTL) |
| USB-connector | USB-B |
| USB-bescherming | 200mA zelfherstellende zekering, geïsoleerde uitgang |
| RS232-aansluiting | DB9 mannelijk |
| RS232-bescherming | TVS diode, surge protection & ESD protection |
| RS232 Transmission Mode | Punt-tot-punt |
| RS232 baudrate | 300bps ~ 921600bps |
| RS485/422-connector | Schroefklem |
| RS485/422 Direction Control | Hardware automatische besturing |
| RS485/422 Protection | 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper) |
| RS485/422 Transmission Mode | Point-to-multipoints (485 mode: up to 32 nodes, repeaters recommended for 16+ nodes; 422 mode: up to 256 nodes, repeaters recommended for 16+ nodes) |
| RS485/422 Baud Rate | 300 bps ~ 2 Mbps |
| TTL (UART) Connector | Schroefklem |
| TTL (UART) Pins | TXD, RXD, GND, 5V/3.3V |
| TTL (UART) Protection | Clamp beschermingsdiode, overvoltage/negatief-voltage proof, schokbestendigheid |
| TTL (UART) Transmission Mode | Punt-tot-punt |
| TTL (UART) Baud Rate | 300 bps ~ 2 Mbps |
| Bedrijfstemperatuur | -40°C ~ 85°C |
| Bedrijfsvochtigheid | 5% RH ~ 95% RH |
| Ondersteunde besturingssystemen | Mac, Linux, Android, Windows 11/10/8.1/8/7 |
| Pakket afmetingen | 6.14 x 4.33 x 1.26 inch |
| Artikelgewicht | 1.76 ons |
| Fabrikant | Waveshare |
| Datum eerste beschikbaarheid | 6 februari 2023 |
Afbeelding 6: Omtrekafmetingen (eenheid: mm)
8. Onderhoud
To ensure the longevity and optimal performance of your waveshare FT232RNL converter, follow these maintenance guidelines:
- Schoonmaak: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or solvents, which may damage the casing of interne componenten.
- Omgeving: Operate and store the converter in a clean, dry environment, away from excessive dust, moisture, and extreme temperatures. Refer to the operating temperature and humidity specifications.
- Behandeling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which could damage the internal circuitry.
- Verbindingen: Ensure all cable connections are secure and free from strain. Periodically check screw terminals for tightness.
9. Probleemoplossing
If you encounter issues with your waveshare FT232RNL converter, consider the following troubleshooting steps:
- Geen stroom (PWR-LED uit):
- Ensure the USB cable is securely connected to both the converter and the host computer.
- Probeer een andere USB-poort op uw computer.
- Verify that your computer's USB port is providing power.
- No Data Transmission (TXD/RXD LEDs not flashing):
- Check all serial connections (RS232, RS485, RS422, TTL) for correct wiring and secure connections.
- Verify that the serial communication software on your computer is correctly configured (COM port, baud rate, data bits, parity, stop bits).
- Ensure the TTL level switch is set correctly for your TTL device (3.3V or 5V).
- Confirm that the connected serial device is powered on and functioning correctly.
- Problemen met stuurprogramma's:
- If the device is not recognized by your operating system, try reinstalling the FTDI drivers. These can typically be found on the FTDI webplaats.
- Check your device manager (Windows) or equivalent system information (Linux/Mac) to see if the device is listed without errors.
- Interferentie:
- While the device has strong anti-interference capabilities, ensure it is not placed near strong electromagnetic interference sources.
10. Garantie en ondersteuning
For warranty information, technical support, or further assistance with your waveshare FT232RNL USB to RS232/485/422/TTL Interface Converter, please contact waveshare directly through their official webwebsite of de verkoper waar u het product hebt gekocht.
An official user guide in PDF format is also available for download: Gebruikershandleiding (PDF)