WORKPRO 3.6V Draadloze Gras- en Struikschaar Gebruikershandleiding

Invoering

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Veiligheidsinformatie

Neem altijd de basisveiligheidsmaatregelen in acht bij het gebruik van elektrisch gereedschap om het risico op brand, elektrische schokken en persoonlijk letsel te beperken.

• Lees de handleiding: Lees alle instructies zorgvuldig door en zorg dat u ze begrijpt voordat u het gereedschap gebruikt.
• Houd het gebied vrij: Keep children, bystanders, and pets away from the operating area.
• Draag beschermende kleding: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: Never touch the blades while the tool is running or connected to power.
• Veilige grip: Houd het gereedschap tijdens gebruik altijd stevig met beide handen vast.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• Opladen: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Opslag: Bewaar het gereedschap op een droge, veilige plaats, buiten bereik van kinderen.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Inhoud van het pakket

Controleer bij het uitpakken of alle artikelen aanwezig zijn en in goede staat zijn:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x Type-C oplaadkabel
• 1 x Gebruikershandleiding

Product voorbijview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Hoofdeenheid: Ergonomic body with integrated motor and battery.
• Grass Blade: Designed for trimming grass edges, 75mm cutting width.
• Shrub Blade: Designed for shaping shrubs and small branches, 120mm cutting length.
• Type-C oplaadpoort: Voor het opladen van de interne batterij.
• Veiligheidsvergrendelingsknop: Voorkomt onbedoeld starten.
• Aan / uit knop: Activates the motor when the safety lock is disengaged.
• Ontgrendelingsknop mes: Maakt het wisselen van messen snel en eenvoudig.
• TPR Anti-Slip Handle: Biedt een comfortabele en veilige grip.

Instellen

De batterij opladen

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Zoek de Type-C-oplaadpoort op het apparaat.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. Tijdens het opladen gaat het oplaadindicatielampje branden (meestal rood).
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Koppel de oplader los zodra het opladen is voltooid.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Messen installeren/verwisselen

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Push the blade firmly into place until it clicks, indicating it is securely locked.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Gebruiksaanwijzing

Always wear appropriate safety gear before operating the shear.

De tool starten en stoppen

1. Ensure the desired blade is securely installed.
2. Houd het gereedschap stevig vast.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

Het gebruik van het grasschaarblad

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Onderhoud

Regelmatig onderhoud zorgt voor optimale prestaties en verlengt de levensduur van uw gereedschap.

Schoonmaak

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Veeg de messen af ​​met een licht geoliede doek om roest te voorkomen.

Onderhoud van het mes

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• If blades become dull, they can be sharpened by a professional or replaced.
• Store blades in a dry place to prevent corrosion.

Afbeelding: Close-up view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Opslag

• Bewaar het gereedschap op een koele, droge plaats, uit de buurt van direct zonlicht en vocht.
• Zorg ervoor dat de batterij gedeeltelijk is opgeladen (ongeveer 50%) voordat u deze voor langere tijd opbergt om de levensduur van de batterij te verlengen.
• Buiten het bereik van kinderen en onbevoegde gebruikers houden.

Probleemoplossing

Specificaties

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Garantie en ondersteuning

Voor garantie-informatie of technische ondersteuning kunt u contact opnemen met de fabrikant of het verkooppunt. Bewaar uw aankoopbewijs.

Fabrikant: Hang Zhou Great Star Industrial Co.,LTD

For further assistance, visit the WORKPRO official website of neem contact op met hun klantenservice.