Invoering
This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Belangrijke veiligheidsinformatie
WAARSCHUWING: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
- Zorg ervoor dat de muurconstructie het ge gecombineerde gewicht van de muurbeugel en uw televisie veilig kan dragen.
- Always use an assistant for lifting and positioning the television.
- Overschrijd het maximale draagvermogen dat voor elk montagemodel is aangegeven niet.
- Controleer regelmatig alle verbindingen en bevestigingsmiddelen om er zeker van te zijn dat ze goed vastzitten.
Inhoud van het pakket
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.
PSMFK7 Full Motion TV Wall Mount Components
Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.
- Full Motion Wall Plate Assembly
- TV-beugels (x2)
- Montageset (diverse schroeven, pluggen, ringen)
- Waterpas
- Kabelbinders
PSMTK1 Tilting TV Wall Mount Components
Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.
- Tilting Wall Plate
- TV-beugels (x2)
- Montageset (diverse schroeven, pluggen, ringen)
- Waterpas
- Kabelbinders
Instellen en installeren
1. Controles vóór installatie
- Controleer tv-compatibiliteit:
For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
- Identificeer het type muur: This mount is designed for installation on single wood studs, solid concrete, or brick walls. NIET alleen op gipsplaat installeren.
- Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.
2. De tv-beugel aan de tv bevestigen
- Plaats uw tv voorzichtig met het scherm naar beneden op een zachte, schone ondergrond.
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
- Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.
3. Montage van de wandplaat
- Determine the desired height for your TV. Mark the drilling locations on the wall.
- Voor installatie van houten stijlen: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
- For Concrete/Brick Wall Installation: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
- Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.
4. De tv aan de muurplaat bevestigen
- Til de tv met behulp van een assistent voorzichtig op aan de bijgeleverde beugels.
- Bevestig de tv-beugel aan de muurplaat. Zorg ervoor dat de tv stevig op de beugel zit.
- For PSMFK7: Bevestig de tv aan de beugel met behulp van de meegeleverde veiligheidsschroeven of vergrendelingsmechanismen.
- For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.
Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.
Uw tv-beugel bedienen
PSMFK7 Full Motion Mount Adjustments
Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.
- Kantelaanpassing: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
- Draaiaanpassing: De scharnierende arm maakt een draaiing van +/-90° mogelijk. Duw of trek de tv voorzichtig naar de gewenste positie. viewhoek.
- Uitbreiding/intrekking: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile Look.
- Nivelleringsaanpassing: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.
PSMTK1 Tilting Mount Adjustments
- Kantelaanpassing: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
- Vergrendelingsmechanisme: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.
Onderhoud
- Controleer regelmatig alle schroeven en bouten om er zeker van te zijn dat ze goed vastzitten.
- Reinig de houder met een zachte, droge doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
- Ensure no cables are pinched or stressed by the mount's movement.
Probleemoplossing
- TV staat niet waterpas: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
- De houder voelt los aan: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
- Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
- Missende onderdelen: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.
Specificaties
| Functie | PSMTK1 Kantelbeugel | PSMFK7 Full Motion Mount |
|---|---|---|
| Compatibiliteit tv-formaat | 23" - 60" | 26" - 55" |
| Draagvermogen | 115 kg (52 lbs) | 70 kg (31.8 lbs) |
| VESA-compatibiliteit | 75x75mm tot 400x400mm | 100x100mm tot 400x400mm |
| Bewegingstype | Kantelen | Swivel, Tilt, Extension |
| Kantelhoek | Adjustable downward tilt | +5° / -15° |
| Zwenkhoek | n.v.t. | +/-90° |
| Nivellering Aanpassing | n.v.t. | +/-3° |
| Verlenging vanaf de muur | Laag Profile | 3.2" tot 19.17" (8.1 cm tot 48.7 cm) |
| Materiaal | Gelegeerd staal | |
| Kleur | Zwart | |
| Montagetype | Muurbevestiging | |
Garantie-informatie
PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH webwebsite. Bewaar uw aankoopbewijs als bewijs van aankoop.
Klantenservice
If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.
- Webwebsite: www.perlesmith.com (Hypothetical link, please replace with actual if available)
- E-mailadres: support@perlesmith.com (Hypothetical email, please replace with actual if available)
- Telefoon: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)
