JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Invoering

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Inhoud van het pakket

Controleer of alle hieronder vermelde artikelen in uw pakket zijn opgenomen:

JEYI M.2 NVMe SSD Enclosure
Thermische pads
Schroevendraaier
USB-A to USB-C Cable (10Gbps)
USB-C naar USB-C-kabel (10 Gbps)
Draagkoord

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Installatie-instructies

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Bereid de behuizing voor: Gently slide open the enclosure to reveal the internal PCB.
Thermische pad aanbrengen: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Plaats een NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Beveilig de SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Sluit de behuizing: Carefully slide the enclosure cover back into place until it clicks securely.

Ontploft view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Gebruiksaanwijzing

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Verbinding maken met apparaat: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Stroomindicator: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Schijfherkenning: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Gegevensoverdracht: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Onderhoud

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Warmtebeheer: De aluminium casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Schoonmaak: Gebruik een zachte, droge doek om de buitenkant van de behuizing schoon te maken. Gebruik geen vloeibare reinigingsmiddelen of oplosmiddelen.
Opslag: Wanneer u de behuizing niet gebruikt, bewaart u deze op een koele, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
Kabelonderhoud: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Probleemoplossing

Probleem	Mogelijke oorzaak	Oplossing
Behuizing niet gedetecteerd door computer.	Losse kabelverbinding. SSD niet correct geïnstalleerd. SSD niet geïnitialiseerd/geformatteerd. Defecte USB-poort of -kabel.	Zorg ervoor dat de kabels goed zijn aangesloten. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Probeer een andere USB-poort of -kabel.
Trage gegevensoverdrachtssnelheden.	Aangesloten op een langzamere USB-poort (bijv. USB 2.0). Thermal throttling due to high temperature. Beperkingen van SSD-prestaties.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Controleer de nominale snelheid van uw NVMe SSD.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Specificaties

Functie	Detail
Model	I9-Seal
Merk	JIJ bent
hardware Interface	USB 3.2 Gen 2 (USB-C)
Gegevensoverdrachtssnelheid	Tot 10 Gbps
Compatibel SSD-type	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Maximale opslagcapaciteit	4 TB
Chipset	JMS583 A3
Functies	UASP Support, TRIM Support, Win to Go (WTG) Support
Materiaal	Aluminiumlegering
Kleur	Zilver
Productafmetingen	4.06 x 1.02 x 0.39 inch (103 x 26 x 10 mm)
Artikelgewicht	0.317 ounce (9 gram)
Compatibele besturingssystemen	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Garantie en ondersteuning

For warranty information or technical support, please refer to the official JEYI webof neem rechtstreeks contact op met hun klantenservice. Details over specifieke garantieperiodes en ondersteuningskanalen vindt u doorgaans in uw aankoopdocumentatie of op de website van de fabrikant. webplaats.

Fabrikant: JIJ bent

Webwebsite: Visit the JEYI Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.