FLEXISPOT E6 Essential (ET365)

Gebruikershandleiding voor het FLEXISPOT E6 Essential (ET365) elektrische staande bureau

Model: E6 Essential (ET365) | Brand: FLEXISPOT

1. Inleiding

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 Essential (ET365) Electric Standing Desk. Please read this manual thoroughly before use to ensure safe and efficient operation.

2. Veiligheidsinformatie

  • Ensure the desk is loaded within the recommended maximum weight limit of 220 lbs (100 kg) to maintain stability and prevent damage.
  • Adjust the desk height according to individual user heights to utilize the 3-stage lift system's full range and ensure optimal stability.
  • Houd kinderen en huisdieren uit de buurt van het bureau tijdens gebruik.
  • Plaats geen vloeistoffen rechtstreeks op het bedieningspaneel of in de buurt van elektrische componenten.
  • Do not disassemble or modify the desk's electrical components. Contact customer support for service.
  • Ensure all cables are properly managed to prevent tripping hazards and damage during height adjustments.

3. Inhoud van het pakket

Your FLEXISPOT E6 Essential desk ships in two boxes. Please verify all components are present before beginning assembly.

Meegeleverde componenten:

  • Desktop (One-Piece Maple Top, 48"x30")
  • Desk Frame (White)
  • Dual Motor Lift System
  • Bedieningspaneel met geheugenpresets
  • Assembly Hardware (screws, wrenches, cable clips)
  • Stroomadapter en kabels
  • Gebruiksaanwijzing
FLEXISPOT E6 Desk components laid out

Image: All components of the FLEXISPOT E6 Essential desk laid out for assembly, including the desktop, frame parts, control panel, and tools.

4. Opstelling en montage

Assembly typically requires one person and takes approximately 1 hour. Follow the steps below for a smooth setup.

4.1 Uitpakken en voorbereiden

  1. Carefully open both boxes and remove all components.
  2. Place the desktop upside down on a soft, clean surface (e.g., carpet or a blanket) to prevent scratches.
  3. Controleer of alle onderdelen overeenkomen met de inhoud van de verpakking.

4.2 Frame-montage

  1. Attach the lifting columns to the crossbeams using the provided screws and tools. Ensure screws are aligned with square holes and tightened securely.
  2. Connect the feet to the bottom of the lifting columns.
  3. Adjust the frame width to match your 48"x30" desktop.

Video: Official installation guide for the FLEXISPOT E6 Essential desk, detailing frame assembly and desktop attachment.

4.3 Desktop Attachment

  1. Center the assembled frame onto the underside of the desktop.
  2. Secure the frame to the desktop using the provided screws. Pre-drilled holes may be present; if not, carefully drill pilot holes.
  3. Attach the control panel to the underside of the desktop, ensuring it is flush with the edge.
FLEXISPOT E6 Intelligent Keypad

Afbeelding: Close-up view of the intelligent keypad control panel with LED display and memory presets, located on the underside of the desktop.

4.4 Kabelbeheer

  1. Connect the dual motors, control panel, and power adapter according to the labels.
  2. Utilize the built-in cable management tray and magnetic cover cloth to organize and conceal all wires.
  3. Ensure cables have enough slack to accommodate full height adjustment without tension.
FLEXISPOT E6 Desk cable management

Afbeelding: Onderkant view of the FLEXISPOT E6 desk showing organized cables within the cable management system.

5. Gebruiksaanwijzing

5.1 Hoogteverstelling

  • Gebruik de Omhoog (▲) En Omlaag (▼) arrow buttons on the control panel to manually adjust the desk height. The LED display will show the current height.
  • The desk features a 3-stage lift system, allowing height adjustments from 23.6" to 48.8".

5.2 Geheugenpresets

  • The control panel has four memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.
  • To save a height: Adjust the desk to your desired height, then press the 'M' button followed by one of the number buttons (1-4). The display will confirm the setting.
  • To recall a saved height: Simply press the corresponding number button (1-4). The desk will automatically move to the saved position.

5.3 Anti-botsingssysteem

  • The desk is equipped with an anti-collision system that detects obstacles during height adjustment. If an obstacle is detected, the desk will stop and reverse slightly to prevent damage.
  • Collision sensitivity can typically be adjusted via the control panel settings (refer to the full manual for detailed instructions).
FLEXISPOT E6 Anti-Collision System

Image: Diagram illustrating the anti-collision system of the FLEXISPOT E6 desk, showing it stopping upon encountering an obstacle.

6. Belangrijkste kenmerken

  • Spacious One-Piece Desktop: A 48"x30" whole-piece maple desktop provides ampRuimte voor meerdere monitoren en accessoires.
  • 3-Stage Dual Motor Lift System: Offers a wide height adjustment range from 23.6" to 48.8" with smooth and quiet operation (under 50 dB).
  • Hoge laadcapaciteit: Supports up to 220 lbs (100 kg), accommodating various office equipment.
  • Programmeerbaar bedieningspaneel: Features an LED display and four memory presets for quick height adjustments.
  • Robuuste constructie: Built with a strong steel structure for enhanced stability and durability.
  • FSC-Certified Desktop: Tabletop made from responsibly sourced wood.
FLEXISPOT E6 Intelligent Keypad

Afbeelding: Gedetailleerd view of the intelligent keypad, highlighting the LED display, memory presets, and up/down controls.

FLEXISPOT E6 Maximum Load Capacity

Image: Visual representation of the desk's 220 lbs maximum load capacity, showing two 110 lbs weights on the desktop.

7. Onderhoud

  • Controleer regelmatig alle schroeven en bouten om er zeker van te zijn dat ze goed vastzitten.
  • Maak het bureaublad schoon met een zachte, droge doek.amp lap. Vermijd agressieve chemicaliën.
  • Keep the electrical components dry and free from dust.
  • Inspecteer de kabels regelmatig op tekenen van slijtage of schade.

8. Probleemoplossing

ProbleemMogelijke oorzaakOplossing
Desk not movingStroomkabel los; overbelasting; motorfout.Check power connections; reduce load; reset the desk (refer to full manual for reset procedure).
Ongelijkmatige hoogteverstellingUneven load; foot pads not adjusted.Distribute weight evenly; adjust foot pads for balance.
Geluid tijdens bedrijfLoose screws; normal motor sound.Tighten all screws; slight motor sound is normal (under 50 dB).

9. Specificaties

MerkFLEXISPOT
ModelnaamE6 Essential
ModelnummerET365
Afmetingen bureaublad48"D x 30"W (47.5"D x 29.5"W actual)
Hoogteverstellingsbereik23.6" tot 48.8"
Lift Systeem3-Stage Dual Motor
Maximale draagkracht220 kg (100 lbs)
GeluidsniveauOnder 50 dB
BureaubladmateriaalFSC-Certified Maple Wood
FramemateriaalMetal (White Frame)

10. Garantie en ondersteuning

FLEXISPOT offers the following warranty for your E6 Essential Electric Standing Desk:

  • 5-jarige dekking: Desk frame and motor.
  • 2-jarige dekking: Control panel and electronics.

For any assistance, questions, or warranty claims, please contact FLEXISPOT customer support through their official webwebsite of de winkel waar het product is gekocht.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.