Philips Jump Starter Instruction Manual

1. Inleiding

Thank you for choosing the Philips Jump Starter DLP8086N. This device is a portable, high-capacity power bank designed to jump-start 12V vehicles and charge various electronic devices. It features an 800A peak current and a 12000mAh battery, making it suitable for gasoline engines up to 6.0L and diesel engines up to 3.0L. Please read this manual carefully before use to ensure safe and optimal performance.

2. Productcomponenten

Het pakket bevat de volgende artikelen:

• Philips Jump Starter Unit (DLP8086N)
• Smart Jump Starter Cables with clamps
• Micro USB-oplaadkabel
• Instruction Manual (with Warranty Card)

Image: Philips Jump Starter DLP8086N with its various ports and buttons labeled, including the power button, Micro USB input, USB output ports, LED light, and jump start port.

3. Specificaties

4. Veiligheidsinformatie en -bescherming

The Philips Jump Starter is equipped with multiple safety features to prevent accidents and ensure user safety. These include:

• Kortsluitbeveiliging
• Overbelastingsbeveiliging
• Over-ontlading Bescherming
• Bescherming tegen omgekeerde verbinding
• Bescherming tegen omgekeerde lading
• Overstroombeveiliging
• Oververhittingsbeveiliging
• Omgekeerde polariteitsbescherming

De slimme klamps feature DSLI technology and communicate with the Battery Management System (BMS) to prevent potential errors that could damage the device or vehicle. Always follow the instructions carefully.

Image: Philips Jump Starter unit shown with its smart clamps, illustrating the various safety protection icons such as short circuit, overcharge, over-discharge, reverse connection, reverse charge, overcurrent, overheat, and reverse polarity protection.

5. Setup and Charging the Unit

5.1 De startbooster opladen

Before first use, fully charge the jump starter. Connect the provided Micro USB charging cable to the Micro USB input port on the jump starter and to a USB power adapter (not included). The LED indicators will show the charging status. A full charge typically takes less than 5 hours.

5.2 Batterijniveau controleren

Press the power button once to check the battery level. The blue LED indicators will light up, showing the remaining charge.

6. Gebruiksaanwijzing

6.1 Jumpstarten van een voertuig

Volg deze stappen om uw voertuig veilig te starten:

1. Zorg ervoor dat de starthulp voldoende is opgeladen.
2. Insert the blue end of the smart jump starter cable into the jump start port on the unit. Ensure a firm connection.
3. Sluit de rode cl aanamp aan op de positieve (+) pool van de accu van uw voertuig.
4. Sluit de zwarte cl aanamp op de minpool (-) van de accu van uw voertuig.
5. Once connected, the indicator on the smart cable should show a solid green light, indicating a safe connection. If it shows a red light or flashes, check the connections.
6. Start de motor van uw voertuig.
7. Once the engine starts, immediately remove the smart jump starter cable from the vehicle battery terminals, then disconnect it from the jump starter unit.

Image: A four-panel illustration demonstrating the jump-starting process: 1. Inserting the jump starter cable into the unit. 2. Connecting the red clamp naar de positieve accupool en de zwarte clamp to the negative terminal. 3. Starting the car engine. 4. Removing the jump starter cable from the battery.

6.2 Elektronische apparaten opladen

The jump starter features two QC3.0 USB output ports for charging smartphones, tablets, and other electronic devices. Connect your device's USB charging cable to one of the USB output ports on the jump starter. The unit will automatically begin charging your device.

Image: The Philips Jump Starter unit connected via USB cables to a smartphone and a tablet, demonstrating its capability to charge electronic devices.

6.3 Het LED-licht gebruiken

De ingebouwde ledlamp biedt drie standen voor verschillende situaties:

• Spotlight-modus: For general illumination in dark environments.
• SOS-modus: Zendt een SOS-signaal uit voor noodgevallen.
• Stroboscoopmodus: Flashing light for signaling or attracting attention.

To cycle through the modes, press the LED light button repeatedly.

Image: A hand holding the Philips Jump Starter, with its LED light illuminating a dark engine bay. Icons below illustrate the three light modes: SOS, Strobe, and Spotlight.

7. Onderhoud

To ensure the longevity and optimal performance of your Philips Jump Starter:

• Bewaar het apparaat op een koele, droge plaats, uit de buurt van direct zonlicht en extreme temperaturen.
• Laad het apparaat elke 3-6 maanden op, ook als het niet in gebruik is, om de levensduur van de batterij te verlengen.
• Reinig de buitenkant met een zachte, damp lap. Gebruik geen agressieve chemicaliën of schurende schoonmaakmiddelen.
• Keep the jump start ports and USB ports free from dust and debris.

8. Probleemoplossing

If you encounter issues with your Philips Jump Starter, refer to the following common solutions:

• Apparaat gaat niet aan: Ensure the unit is charged. Press and hold the power button for a few seconds.
• Het voertuig start niet: Controleer of de slimme clamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the smart cable indicator shows a solid green light. The vehicle battery might be severely discharged; try waiting a few minutes after connecting before attempting to start.
• Unit does not charge: Verify that the Micro USB charging cable is properly connected to both the jump starter and the power adapter. Try using a different USB power adapter or cable.
• Electronic devices do not charge: Ensure the jump starter has sufficient charge. Check the USB cable connection to both the jump starter and the device.

9. Garantie en ondersteuning

This Philips Jump Starter DLP8086N comes with a 1 jaar fabrieksgarantieBewaar uw aankoopbewijs voor garantieclaims.

For any questions, concerns, or technical support regarding your product, please contact Philips customer service. Refer to the warranty card included in your package for specific contact information.

Image: A smiling customer support representative wearing a headset, symbolizing available product support.