1. Inleiding
The Sinocare Safe AQ Smart Blood Glucose Monitoring System is designed for the quantitative measurement of glucose in fresh capillary whole blood samples taken from the fingertip. This system is intended for self-testing by people with diabetes at home and by healthcare professionals in clinical settings as an aid in monitoring the effectiveness of diabetes control. It provides rapid, reliable results with no coding required, making it easy to use.
Image: The Sinocare Safe AQ Smart Blood Glucose Monitoring System, including the meter, test strips, lancets, lancing device, and carrying case.
2. Wat zit er in de doos?
Your Sinocare Safe AQ Smart diabetes test kit contains the following components:
- 1 x Sinocare Safe AQ Smart Blood Glucose Monitor
- 25 x No-coding AQ Test Strips
- 25 x Lancetten
- 1 x Painless Lancing Device
- 1 x Gebruikershandleiding
- 1 x Quick Guide
- 1 x draagtas
- 2 x AAA-batterijen
Image: All components of the Sinocare Safe AQ Smart kit, including the meter, lancing device, test strips, lancets, and carrying case.
3. Opzetten en voorbereiden
3.1 Batterijen plaatsen
Insert the 2 AAA batteries into the battery compartment on the back of the meter, ensuring correct polarity.
3.2 Preparing the Lancing Device
- Schroef de dop van het prikapparaat los.
- Plaats een nieuwe, steriele lancet stevig in de lancethouder.
- Draai de beschermkap van de lancet los en bewaar deze voor veilige verwijdering.
- Plaats de dop terug op het prikapparaat.
- Adjust the penetration depth by rotating the cap. Start with a shallower setting (e.g., 1 or 2) for softer skin and increase if needed.
- Pull back the cocking barrel until it clicks, indicating it is ready to use.
3.3 Preparing the Test Strip
Remove a test strip from the vial. Close the vial immediately after removing a strip to protect the remaining strips from moisture. The meter does not require coding.
Video: A demonstration of preparing the lancing device and inserting a test strip into the Sinocare Safe AQ Smart meter.
4. Operating Instructions (Blood Glucose Test)
- Was en droog je handen: Always wash your hands thoroughly with soap and warm water, then dry them completely before testing.
- Teststrip plaatsen: Insert the test strip into the meter. The meter will automatically turn on and display a blood drop symbol.
- Bloed verkrijgen Sampon: Press the lancing device firmly against the side of your fingertip and press the release button. A small drop of blood will form.
- Breng Bloed S . aanampon: Gently touch the tip of the test strip to the blood drop. The blood will be automatically drawn into the strip. The meter requires only 0.6 µL of blood. If the first sample is insufficient, you have 5 seconds to apply a second drop to the same strip.
- Lees de resultaten: The meter will count down from 5 seconds and then display your blood glucose result in mg/dL.
- Recordresultaten: The meter automatically stores up to 99 test results with date and time.
- Gebruikte materialen afvoeren: Eject the used lancet and test strip into a suitable sharps container.
Image: Visual steps demonstrating how to use the blood glucose meter, from inserting the strip to obtaining the result.
Image: A detailed infographic showing the simple steps for using the Sinocare Safe AQ Smart meter, emphasizing hygiene and correct application.
Video: A comprehensive guide demonstrating the full process of blood glucose testing with the Sinocare Safe AQ Smart system, from preparation to result and disposal.
5. Onderhoud en verzorging
5.1 De meter reinigen
Wipe the meter exterior with a soft, damp cloth. If necessary, use a mild detergent or 70% isopropyl alcohol. Do not immerse the meter in water or use harsh cleaning agents.
5.2 Opslag
Store the meter, test strips, and lancing device in their original carrying case in a cool, dry place. Keep away from direct sunlight and extreme temperatures. Ensure the test strip vial is tightly closed after each use.
5.3 Disposal of Used Materials
Used lancets and test strips are biohazardous waste. Always dispose of them in a puncture-resistant sharps container according to local regulations. Never reuse lancets or test strips.
Image: Illustration of the contactless ejection mechanism for lancets and test strips, promoting hygienic disposal.
6. Probleemoplossing
If you encounter any issues with your Sinocare Safe AQ Smart system, please refer to the following common problems and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| De meter gaat niet aan. | Batterijen zijn leeg of verkeerd geplaatst | Controleer de polariteit van de batterijen of vervang ze door nieuwe AAA-batterijen. |
| Foutmelding op scherm | Used or damaged test strip, insufficient blood sample, or extreme temperature. | Use a new test strip, ensure adequate blood sample, or test within operating temperature range (10-40°C). Refer to the full user manual for specific error codes. |
| Onjuiste resultaten | Expired test strips, improper storage, dirty meter, or incorrect testing procedure. | Check test strip expiry date, ensure proper storage, clean the meter, and review operating instructions carefully. Perform a control solution test if available. |
| Geen bloed sample obtained | Lancing device depth too shallow or lancet not properly loaded. | Adjust lancing device depth to a higher setting. Ensure the lancet is correctly inserted and the device is cocked. |
If the problem persists, please contact Sinocare Customer Support.
7. Specificaties
- Merk: Sinocare
- Modelnaam: Veilig AQ Smart
- Meeteenheid: mg/dL
- Bedrijfstijd: 5 seconden
- Bloed Samphet volume: 0.6 µL
- Geheugencapaciteit: 99 testresultaten
- Samenstelling van de batterijcel: Alkalisch
- Energiebron: 2 x AAA-batterijen
- Fabrikant: sinocare.inc
- Land van herkomst: China
Image: The Sinocare Safe AQ Smart meter showing a rapid test result after 5 seconds.
8. Garantie en ondersteuning
8.1 Beperkte garantie
Sinocare provides a limited warranty for the Safe AQ Smart Blood Glucose Monitoring System. Please refer to the warranty card included in your kit or visit the official Sinocare website voor gedetailleerde garantievoorwaarden.
8.2 Klantenservice
For any questions, technical assistance, or support regarding your Sinocare Safe AQ Smart system, please contact our customer service team. Contact information can be found in the quick guide or on the official Sinocare webplaats.