1. Inleiding
The CAD Audio WX50 is a digital frequency agile single-channel UHF handheld wireless system designed for clear vocal pickup and reliable performance. This system offers plug-and-play simplicity with its QuickMic receiver, which connects directly into a mixer or amplifier's 1/4-inch jack. The handheld transmitter features a CADLive-style capsule for professional vocal clarity and includes built-in mute and battery indicators.
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your WX50 wireless system.
Image 1: CAD Audio WX50 Handheld Wireless Microphone and QuickMic Receiver.
2. Inhoud van het pakket
Controleer voordat u met de installatie begint of alle onderdelen aanwezig zijn:
- WX50 Handheld Transmitter (Microphone)
- QuickMic Receiver
- 1/4-inch to 1/8-inch Gold Adapter
- Power Cord (for receiver charging)
- No-slip Ring
- Pop-filter
- 1 Lithium Ion Battery (included, typically pre-installed in transmitter)
3. Installatie-instructies
3.1 De ontvanger opladen
- Locate the DC 5V Charging Port on the QuickMic Receiver.
- Connect the provided power cord to the charging port and a suitable USB power source (not included).
- The Charge Indicator LED will illuminate red while charging and turn green when fully charged.
3.2 Installing Batteries in the Transmitter
- Draai de onderste dop van de handzender los om bij het batterijcompartiment te komen.
- Plaats de meegeleverde lithium-ionbatterij en let daarbij op de juiste polariteit (+/-).
- Schroef de onderste dop stevig terug op de zender.
3.3 De ontvanger aansluiten
- Plug the QuickMic Receiver directly into a 1/4-inch input jack on your mixer, amplifier, or PA system. If your input is 1/8-inch, use the provided 1/4-inch to 1/8-inch gold adapter.
- Ensure the receiver is securely seated in the input.
3.4 Powering On and Frequency Selection
- Press and hold the On/Off Switch on the QuickMic Receiver to power it on. The RF Indicator will light up.
- Press and hold the On/Off Switch on the handheld transmitter to power it on. The Frequency Display will illuminate.
- The system will automatically pair. If pairing does not occur, or if you experience interference, press the Frequency Selection Button on the handheld transmitter to cycle through available frequencies until a clear channel is found. The RF Indicator on the receiver will show red for Channel A and green for Channel B.
Image 2: Labeled diagram of the WX50 Handheld Transmitter and QuickMic Receiver components.
4. Gebruiksaanwijzing
4.1 De microfoon gebruiken
- Once powered on and paired, the microphone is ready for use.
- Speak directly into the top grille of the microphone for optimal sound pickup.
- Use the On/Off Mute Switch on the handheld transmitter to temporarily mute the microphone output without powering it down.
4.2 Monitoring Battery Life
- The handheld transmitter features a Low-Battery LED Indicator. This indicator will illuminate when the battery level is low, signaling that the battery needs to be charged or replaced soon.
- The QuickMic Receiver also has a Low Battery Indicator (red = needs charged, blue = on).
4.3 Draadloos bereik
The WX50 system offers a wireless range of approximately 50 meters (164 feet) under optimal conditions. Factors such as obstacles, other wireless devices, and environmental interference can affect the actual operating range.
Image 3: Key features of the CAD Audio WX50 system, including Frequency Agile Design, Low Battery Indicator, and 50m Wireless Range.
5. Onderhoud
5.1 Batterijonderhoud
- Recharge the receiver's battery when the charge indicator shows low.
- For the handheld transmitter, replace or recharge the Lithium Ion battery when the low-battery indicator activates.
- If storing the unit for an extended period, remove batteries from the transmitter to prevent leakage.
5.2 Reinigen
- Wipe the microphone and receiver surfaces with a soft, dry cloth.
- Gebruik geen agressieve chemicaliën, oplosmiddelen of schuurmiddelen.
- Periodically clean the pop filter and microphone grille to maintain audio quality.
5.3 Opslag
Store the WX50 system in a cool, dry place away from direct sunlight and extreme temperatures. Protect the components from dust and physical damage.
6. Probleemoplossing
If you encounter issues with your CAD Audio WX50 system, refer to the following common problems and solutions:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Geen geluid of onderbroken audio. | Low battery in transmitter or receiver; Interference; Microphone muted; Receiver not properly connected; Transmitter and receiver not paired. | Charge/replace batteries. Change frequency on transmitter. Unmute microphone. Ensure receiver is fully inserted into input. Re-pair transmitter and receiver. |
| Vervormd geluid | Input level too high; Interference; Microphone too close to sound source. | Adjust input gain on mixer/amplifier. Change frequency. Maintain appropriate distance from sound source. |
| Kort draadloos bereik | Obstacles blocking signal; Environmental interference; Low battery. | Ensure clear line of sight between transmitter and receiver. Change frequency. Charge/replace batteries. |
| De ontvanger gaat niet aan. | Receiver battery depleted; Faulty power cord. | Charge receiver battery. Try a different power cord or USB power source. |
7. Specificaties
Detailed technical specifications for the CAD Audio WX50 system:
- Modelnaam: WX50
- Connectiviteitstechnologie: Extra
- Aansluittype: 6.35 mm Jack (1/4 inch TRS)
- Kleur: Zwart
- Polair patroon: Unidirectioneel
- Vormfactor microfoon: Microfoonsysteem
- Energiebron: Werkt op batterijen (1 lithium-ionbatterij meegeleverd)
- Signaal - ruis verhouding: 70dB
- Aantal kanalen: 16
- Hoorbaar geluid: 70 decibel
- Behuizingsmateriaal: Plastic
- Frequentiebereik: 20Hz - 16kHz
- Modulatie: High Definition Digital QPSK
- Zendvermogen: 10mW
- Gevoeligheid: -43dBV (6.8mV) @ 1Pa
- Frequentieband: 500 MHz - 599 MHz
- Levensduur batterij: >8 uur
- Afmetingen: 11 cm x 3.94 cm x 2.44 cm
- Artikelgewicht: 12 ons (0.34 kg)
Afbeelding 4: voorbijview of CAD Audio WX50 technical specifications.
Image 5: Information on WX50 battery life, dimensions, and weight.
8. Garantie-informatie
The CAD Audio WX50 Digital Frequency Agile Single Channel UHF Handheld Wireless System is covered by a 2 jaar fabrieksgarantie. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please refer to the official CAD Audio webwebsite of neem contact op met hun klantenservice.
9. Ondersteuning
For further assistance, technical support, or inquiries regarding your CAD Audio WX50 system, please visit the official CAD Audio webwebsite of neem contact op met hun klantenservice. Contactgegevens zijn doorgaans te vinden op de website van de fabrikant. weblocatie of productverpakking.