Absima CR4S V2 2.4Ghz Radio System

1. Inleiding

Bedankt voor uw aankoopasing the Absima CR4S V2 2.4Ghz Radio System. This 4-channel pistol grip remote control system is designed for reliable and precise operation of your remote-controlled vehicles. It features a robust design and includes a "beginner mode" for ease of use, making it suitable for users of all experience levels.

2. Veiligheidsmaatregelen

• Always operate your RC vehicle in a safe and responsible manner.
• Ensure batteries are correctly installed and charged before use.
• Do not expose the radio system to water or extreme temperatures.
• Keep the system away from small children to prevent accidental ingestion of small parts.
• Turn off the receiver first, then the transmitter, when finished operating. Turn on the transmitter first, then the receiver, when starting operation.

3. Inhoud van het pakket

The Absima CR4S V2 2.4Ghz Radio System package includes the following components:

• Absima CR4S V2 2.4Ghz Transmitter (TX)
• Absima 2.4Ghz Receiver (RX)

4. Product voorbijview

Familiarize yourself with the main components of your Absima CR4S V2 radio system.

Figure 4.1: Absima CR4S V2 Transmitter (left) and Receiver (right).

Afbeelding 4.2: Gedetailleerd view of the Absima CR4S V2 Transmitter's control panel, showing various adjustment knobs and switches.

4.1 zender (TX)

• Stuur: Controls the left and right steering of the vehicle.
• Gashendel: Controls forward and reverse movement. Pull for forward, push for reverse/brake.
• CH3/CH4 Buttons/Switches: Auxiliary channels for controlling additional functions on your vehicle (e.g., lights, winches), if supported.
• Trimaanpassingen: Dials or sliders for fine-tuning steering and throttle neutral positions.
• Aan / uit schakelaar: Zet de zender aan/uit.
• Batterijcompartiment: Located at the bottom of the handle, for installing alkaline batteries.

4.2 Ontvanger (RX)

• Antenne: Receives signals from the transmitter. Ensure it is properly positioned.
• Channel Ports: Connectors for steering servo, throttle ESC, and auxiliary channels (CH3, CH4).
• Bindknop: Used to pair the receiver with the transmitter.

5. Instellen

5.1 Zenderbatterij installeren

1. Locate the battery compartment cover on the bottom of the transmitter handle.
2. Schuif het deksel open.
3. Insert the required alkaline batteries (not included) according to the polarity markings (+/-).
4. Sluit het batterijklepje goed.

5.2 Receiver Installation and Connection

1. Mount the receiver securely in your RC vehicle, away from electrical interference.
2. Connect the steering servo to the "CH1" port on the receiver.
3. Connect the Electronic Speed Controller (ESC) to the "CH2" port on the receiver.
4. Connect any auxiliary components (e.g., lights) to "CH3" or "CH4" ports as needed.
5. Ensure the receiver antenna is extended and positioned correctly for optimal signal reception.

5.3 De zender en ontvanger binden

Binding is the process of linking the transmitter and receiver so they communicate exclusively with each other.

1. Zorg ervoor dat de zender UIT staat.
2. Connect a bind plug (if supplied with your vehicle's ESC or receiver) to the "BIND" port on the receiver.
3. Power on the RC vehicle (which powers the receiver). The receiver's LED should flash, indicating it's in bind mode.
4. While holding down the bind button on the transmitter (refer to transmitter diagram for location), turn on the transmitter.
5. Release the bind button on the transmitter once its LED indicates a successful connection (usually a solid light).
6. Schakel eerst de ontvanger uit en daarna de zender.
7. Verwijder de bindplug van de ontvanger.
8. Turn on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.

6. In bedrijf

6.1 Power On/Off Sequence

• Inschakelen: Turn on the transmitter first, then power on your RC vehicle (receiver).
• Uitschakelen: Power off your RC vehicle (receiver) first, then turn off the transmitter.

6.2 Basisbedieningen

• Sturen: Rotate the steering wheel left or right to control the direction of your vehicle.
• Throttle: Pull the trigger towards you for forward movement. Push the trigger away from you for reverse or braking.
• Auxiliary Channels (CH3/CH4): Use the corresponding buttons or switches on the transmitter to activate functions connected to these channels on your vehicle.

6.3 Beginnersmodus

The Absima CR4S V2 features a "beginner mode" which limits the maximum throttle output, making the vehicle easier to control for new users or children. Refer to your transmitter's specific controls for activating and deactivating this mode. This mode helps in learning to drive without overwhelming power.

7. Onderhoud

• Houd de zender en ontvanger schoon en vrij van stof en vuil. Gebruik een zachte, droge doek voor het reinigen.
• Avoid exposing the system to direct sunlight or high humidity for extended periods.
• Verwijder de batterijen uit de zender als deze gedurende langere tijd niet wordt gebruikt om lekkage te voorkomen.
• Regularly check all connections for security and wear.

8. Probleemoplossing

9. Specificaties

• Modelnummer: 2000010
• Kanalen: 4
• Frequentie: 2.4 GHz
• Zender afmetingen: Ongeveer 9 x 2 x 36 cm
• Gewicht: Approximately 130 g (Transmitter only, without batteries)
• Materiaal: Plastic
• Kleur: Zwart
• Batteries Required (Transmitter): Ja (alkalisch, niet inbegrepen)
• Montage vereist: Nee

10. Garantie

Absima products are manufactured to high quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or visit the official Absima webplaats.

11. Ondersteuning

For technical assistance, troubleshooting, or spare parts inquiries, please contact your local Absima dealer or visit the official Absima support website. Online resources, FAQs, and contact information can typically be found there.