Invoering
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Good Earth Lighting Jordan 11-inch LED Flush Mount fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference. This fixture is designed for indoor use in damp locations such as bathrooms, bedrooms, hallways, or kitchens.
Image: Good Earth Lighting Jordan 11-inch LED Flush Mount fixture in satin nickel finish.
Veiligheidsinformatie
WAARSCHUWING: RISICO OP ELEKTRISCHE SCHOK.
- Always turn off power at the circuit breaker or fuse panel before installing or servicing the fixture.
- Raadpleeg een gekwalificeerde elektricien als u twijfelt over het installatieproces.
- Zorg ervoor dat alle elektrische aansluitingen worden gemaakt in overeenstemming met de plaatselijke voorschriften en verordeningen.
- Probeer het armatuur op geen enkele manier te wijzigen.
- This fixture is designed for 120V operation.
- Do not use with dimmers not specified as compatible.
Inhoud van het pakket
Controleer of alle componenten aanwezig zijn voordat u met de installatie begint:
- LED Flush Mount Fixture (with integrated LED lights)
- Verspreider
- Decoratieve Ring
- Montagebeugel
- Postkappen (3)
- Draadmoeren
- Doos Schroeven
Afbeelding: Ontploft view of the fixture showing the main body, diffuser, and decorative ring.
Installatie-instructies
Follow these steps for proper installation of your LED flush mount fixture:
- Schakel de stroom uit: Before starting any electrical work, shut off power to the electrical box at the circuit breaker or fuse panel.
- Demonteer het armatuur: Carefully remove the three post caps, then lift off the diffuser and the decorative ring. Set these components aside in a safe place.
- Montagebeugel bevestigen: Secure the mounting bracket to the electrical box using the two provided box screws. Ensure it is firmly attached.
- Draadverbindingen:
- Connect the J-box ground wire (green or copper) with the fixture ground wire using a wire nut.
- Connect the black supply lead to the black fixture wire using a wire nut.
- Connect the white supply lead to the white fixture wire using a wire nut.
- Push Excess Wire: Gently push any excess wire up into the J-box.
- Bevestigingspunt: Lift the fixture up to the ceiling. Carefully guide the threaded tube on the fixture through the center hole of the mounting bracket.
- Veilig armatuur: Secure the fixture to the electrical box by tightening down the cap nut and washer onto the threaded tube. Do not overtighten.
- Reassemble Diffuser and Ring: Align the three holes in the decorative ring with the three posts on the fixture pan. Place the diffuser inside the decorative ring.
- Secure with Post Caps: Secure the diffuser and decorative ring by screwing the three post caps back onto the posts.
- Herstel de stroom: Restore power to the electrical box and test the fixture to ensure it is working properly.
Video: Official installation guide for the Good Earth Lighting Jordan Collection flush mount fixture. This video demonstrates the step-by-step process of mounting the light fixture to the ceiling, including wiring connections and reassembly.
Image: The Jordan 11-inch LED Flush Mount fixture installed on a ceiling in a bedroom, providing ambient lighting.
Gebruiksaanwijzing
The Good Earth Lighting Jordan 11-inch LED Flush Mount fixture is designed for simple operation.
- Aan/uit: Gebruik een standaard wandschakelaar om het armatuur aan of uit te schakelen.
- Dimbare functionaliteit: This fixture is dimmable between 15% to 100% brightness. It is compatible with most existing and new wall forward phase electronic (TRIAC) dimmers. Compatible dimmers include Lutron Diva CL (DVWCL-153P or DVCL-153P), Lumea CL (LGCL-153P), and Toggler CL (TGCL-153P8). Note that this list is not exhaustive, and compatibility with other dimmers is not guaranteed.
Onderhoud
To ensure the longevity and optimal performance of your fixture, follow these simple maintenance guidelines:
- Schoonmaak: Schakel de stroom uit voordat u gaat reinigen. Gebruik een zachte, droge of licht vochtige doek.amp cloth to wipe the exterior surfaces of the fixture. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- LED-verzorging: The integrated LED lights are designed for long-lasting performance and do not require replacement. Do not attempt to open the sealed LED module.
Probleemoplossing
Als uw armatuur niet naar behoren werkt, raadpleeg dan de volgende veelvoorkomende problemen en oplossingen:
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Het licht gaat niet aan | Geen stroom naar armatuur | Controleer de stroomonderbreker of zekering. Zorg ervoor dat de wandschakelaar AAN staat. |
| Light flickers or dims improperly | Incompatibele dimmerschakelaar | Ensure a compatible forward phase electronic (TRIAC) dimmer is used. Refer to the 'Operating Instructions' section for compatible models. |
| Losse draadverbindingen | Schakel de stroom uit en controleer of alle draadverbindingen goed vastzitten. | |
| Light output is low | Dimmerinstelling te laag | Zet de dimmer op een hogere stand. |
Als het probleem aanhoudt na het proberen van deze oplossingen, neem dan contact op met de klantenservice.
Specificaties
| Functie | Detail |
|---|---|
| Merk | Goede aardverlichting |
| Modelnummer | FL1060-NK3-11LF0 |
| Maat | 11 inch |
| Finish | Satijn Nikkel |
| Lichtbron | Geïntegreerde LED |
| Helderheid | 1100 Lumen |
| Kleurtemperatuur | 3000K (helder wit) |
| Wattage | 20.73 watt |
| Deeltage | 120 Volt |
| Dimbaar | Yes (with compatible TRIAC dimmers) |
| Geschatte Lamp Leven | 50,000 uur |
| Certificering | ETL genoteerd |
| Binnen-/buitengebruik | Binnen (Damp Locatie beoordeeld) |
Image: Lighting Facts label detailing light output, wattage, color accuracy, and color temperature for the fixture.
Garantie en ondersteuning
Garantie: This Good Earth Lighting fixture is covered by a 10-year limited manufacturer warranty. Please refer to the warranty documentation included with your purchase for full terms and conditions.
Klantenservice: For technical assistance, replacement parts, or warranty inquiries, please contact Good Earth Lighting customer service. Contact information can typically be found on the product packaging or the official Good Earth Lighting webplaats.