XTOOL TP150 TPMS Relearn Tool-gebruikershandleiding

1. Inleiding

The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.

2. Veiligheidsinformatie

Always observe the following safety precautions when operating the TP150 tool:

• Lees alle instructies zorgvuldig door voordat u het product gebruikt.
• Do not operate the tool in wet conditions or near flammable liquids/gases.
• Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable.
• Use only the accessories and parts specified by XTOOL.
• Houd het gereedschap uit de buurt van kinderen.
• Properly dispose of old TPMS sensors and batteries according to local regulations.

3. Product voorbijview

The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.

Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.

3.1. Belangrijkste kenmerken

• TPMS-activering: Activates all known OE and aftermarket TPMS sensors.
• TPMS opnieuw inleren: Supports OBD Relearn and Static Relearn for all sensors.
• TPMS Programming: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
• TPMS Diagnosis: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
• Realtime gegevensweergave: Shows sensor ID, tire pressure, temperature, and sensor voltage.
• OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.

4. Instellen

4.1. Eerste apparaatinstallatie

1. Uitpakken: Carefully remove the TP150 tool and accessories from the packaging.
2. Inschakelen: Druk op de aan/uit-knop om het apparaat in te schakelen.
3. Software-update: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)

4.2. Verbinding maken met voertuig

1. Locate the vehicle's OBDII port, typically under the dashboard on the driver's side.
2. Zorg ervoor dat het contact van het voertuig in de UIT-stand staat.
3. Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
4. Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.

5. Gebruiksaanwijzing

The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.

5.1. Activeren van de TPMS-sensoren

1. Selecteer in het hoofdmenu "TPMS" or "Activate".
2. Selecteer het merk, model en bouwjaar van het voertuig.
3. Selecteer "Activate Sensor".
4. Hold the TP150 tool near each tire's valve stem and press the activation button.
5. The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.

5.2. Procedures voor het opnieuw inleren van het TPMS-systeem

Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.

1. Selecteer in het hoofdmenu "TPMS", Dan "Relearn".
2. Selecteer het merk, model en bouwjaar van het voertuig.
3. Choose the appropriate relearn method:
• OBD opnieuw inleren: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
• Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
4. Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.

5.3. Programming XTOOL Sensors

The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.

1. Selecteer in het hoofdmenu "TPMS", Dan "Program Sensor".
2. Place the XTOOL sensor to be programmed near the TP150's antenna.
3. Kies een van de volgende programmeermethoden:
• Automatische ID-generatie: The tool generates a new, unique sensor ID.
• Enter ID Manually: Input a specific sensor ID if known.
• Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
• Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
4. Follow the on-screen prompts to complete the programming.

5.4. Diagnosing TPMS System

1. Connect the TP150 to the vehicle's OBDII port.
2. Selecteer in het hoofdmenu "TPMS", Dan "Diagnose".
3. The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
4. Review the displayed DTCs to identify system faults.
5. After repairs, select "Clear DTCs" to erase the codes and reset the TPMS warning light.

6. Onderhoud

• Schoonmaak: Veeg het apparaat af met een zachte, damp doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
• Opslag: Store the TP150 in its protective case in a dry, cool environment when not in use.
• Software-updates: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
• batterij zorg: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.

7. Probleemoplossing

8. Specificaties

9. Garantie en ondersteuning

9.1. Garantie-informatie

XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.

9.2. Technische ondersteuning

For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:

• Officieel Webwebsite: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
• E-mailondersteuning: Raadpleeg het contactgedeelte op de officiële website webplaats.
• Online bronnen: Many helpful guides and videos may be available on the XTOOL webhun website of hun officiële socialemediakanalen.

When contacting support, please have your product model (XT-TP150) and serial number ready.