Spinnaker Hull SP-5088-05 Automatic Wrist Watch User Manual

Invoering

This manual provides essential instructions for the proper use and care of your Spinnaker Hull SP-5088-05 Automatic Wrist Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. This watch features an automatic mechanical movement and is designed for robust use, including diving.

Image: The Spinnaker Hull SP-5088-05 Automatic Wrist Watch, showcasing its dark blue dial, bronze-tone bezel, and leather strap from an angled perspective.

Instellen en eerste wikkeling

Your Spinnaker Hull SP-5088-05 is an automatic mechanical watch. It is powered by the motion of your wrist and does not require a battery. For initial setup or if the watch has stopped, follow these steps:

1. Draai de kroon los: The crown is located on the side of the watch case. Gently unscrew it counter-clockwise until it springs free from the case. This is the winding position (Position 0).
2. Handmatig opwinden: In Position 0, turn the crown clockwise approximately 30-40 times. This will provide enough power reserve to start the watch. You should feel a slight resistance as you wind.
3. Stel de datum in: Pull the crown out to the first click (Position 1). Turn the crown either clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this period, first set the time outside this window, then set the date, and finally reset the time.
4. Stel de tijd in: Pull the crown out to the second click (Position 2). The second hand will stop. Turn the crown to set the hour and minute hands. To ensure accurate time setting, synchronize with a reliable time source. Push the crown back in to restart the second hand.
5. Beveilig de kroon: Once the time and date are set, push the crown back into the case and screw it down clockwise firmly until it is tight. This ensures the watch's water resistance.

Afbeelding: Een close-up view of the Spinnaker Hull SP-5088-05 watch dial, highlighting the hands, luminous markers, date window, and the crown on the right side of the case, which is used for setting the time and date.

Uw horloge bedienen

Automatisch uurwerk

Once initially wound, your watch will continue to run as long as it is worn regularly. The rotor inside the watch winds the mainspring with the natural motion of your arm. If the watch is not worn for an extended period (typically 40-48 hours, depending on the power reserve), it will stop and require manual winding to restart.

Unidirectionele draaibare lunette

The Spinnaker Hull SP-5088-05 features a unidirectional rotating bezel. This bezel is designed for timing events, particularly dives. To use it:

1. Draai de ring tegen de klok in om de nulmarkering uit te lijnen met de minutenwijzer.
2. De minutenwijzer geeft vervolgens de verstreken tijd aan ten opzichte van de schaalverdeling op de lunette.
3. The unidirectional design prevents accidental clockwise rotation, which could falsely indicate less elapsed time during a dive, enhancing safety.

Water Resistance (300 Meters / 1000 Feet)

This watch is rated for 300 meters (30 ATM) of water resistance, making it suitable for professional marine activity and serious surface water sports, but not for saturation diving. Always ensure the crown is fully screwed down before exposing the watch to water. Do not operate the crown or pushers (if present) while the watch is wet or submerged.

Image: The Spinnaker Hull SP-5088-05 watch worn on a wrist, demonstrating its appearance and fit during daily use.

Onderhoud en verzorging

• Schoonmaak: Wipe the watch case and crystal with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the crown is fully screwed down. Avoid harsh chemicals or abrasive materials.
• Onderhoud van leren bandjes: The leather strap is susceptible to damage from water, sweat, and direct sunlight. Avoid prolonged exposure to moisture. If the strap gets wet, dry it gently with a soft cloth and allow it to air dry completely away from direct heat. Regular cleaning with a specialized leather cleaner can help maintain its condition.
• Vermijd extreme temperaturen: Do not expose your watch to sudden temperature changes or extreme heat/cold, as this can affect the movement and seals.
• Magnetische velden: Keep your watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices) as magnetism can affect the accuracy of mechanical movements.
• Onderhoud: Mechanical watches benefit from periodic servicing, typically every 3-5 years, to ensure optimal performance and lubrication of the movement. Contact an authorized service center for professional maintenance.

Probleemoplossing

Specificaties

• Model: SP-5088-05 (Hull Diver)
• Beweging: Automatisch Mechanisch
• Materiaal behuizing: Roestvrij staal
• Kastdiameter: 42 millimeter
• Kastdikte: 14 millimeter
• Bandmateriaal: Leer
• Bandbreedte: 22 millimeter
• Sluitingstype: Tanggesp
• Kristal: Saffier kristal
• Waterbestendigheid: 300 meter (30 ATM / 1000 voet)
• Wijzerplaatkleur: Blauw
• Lunette: Eenrichtingsrotatie

Afbeelding: Een voorkant view of the Spinnaker Hull SP-5088-05 Automatic Wrist Watch, clearly showing the dark blue dial, luminous markers, and the bronze-tone unidirectional bezel.

Garantie en ondersteuning

Spinnaker watches are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.

For technical assistance, service, or warranty claims, please contact Spinnaker customer support or an authorized service center. You can usually find contact information on the official Spinnaker webwebsite of via uw verkoper.

Belangrijk: Unauthorized repairs or modifications may void your warranty. Always seek professional assistance for any issues beyond basic operation and care.