ANSMANN FL1600R 20W Cordless LED Work Light

1. Inleiding

Thank you for choosing the ANSMANN FL1600R 20W Cordless LED Work Light. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new work light. Please read these instructions carefully before use and retain them for future reference.

The ANSMANN FL1600R is designed for various craft activities, offering a balance of performance and mobility. Its compact design, battery operation, and high light output ensure comfortable and efficient work.

2. Veiligheidsinstructies

Neem altijd de volgende veiligheidsmaatregelen in acht om letsel of schade aan het product te voorkomen:

• Kijk niet rechtstreeks in de LED-lichtbron wanneer deze actief is, aangezien dit oogletsel kan veroorzaken.
• Houd het apparaat buiten bereik van kinderen.
• Open of wijzig het apparaat niet. Reparaties mogen alleen worden uitgevoerd door gekwalificeerd personeel.
• Use only the original power supply unit provided with the device for charging.
• Ensure the work light is placed on a stable surface to prevent it from tipping over.
• Gebruik het apparaat niet als het zichtbaar beschadigd is.
• The work light is IP54 rated for protection against dust and splashing water. Do not immerse it in water.
• Operate the device within the specified temperature range of -20 °C to 50 °C.

3. Inhoud van het pakket

Controleer het pakket op de volgende items:

• 1x ANSMANN FL1600R 20W Cordless LED Work Light (approx. 1440 g)
• 1x Power Supply Unit (12 V/1000 mA – European plug)
• 1x Gebruiksaanwijzing

4. Product voorbijview

The ANSMANN FL1600R features a robust design with a blue frame and a black light housing. It includes an integrated stand for flexible positioning and a handle for portability.

Figuur 1: Voorzijde view of the ANSMANN FL1600R 20W Cordless LED Work Light, highlighting its blue frame and black LED housing.

5. Instellen

The ANSMANN FL1600R is designed for immediate use. No complex assembly is required.

1. Uitpakken: Carefully remove the work light and all accessories from the packaging.
2. Positionering: Place the work light on a stable, flat surface using its integrated adjustable stand. The stand allows for flexible angling of the light.
3. Optionele montage: The work light features an integrated tripod mount for use with compatible tripods (sold separately). It can also be mounted using a wall-mount bracket (see Figure 2).

Figure 2: Illustration of mounting options, including a tripod stand and wall-mount bracket (accessories sold separately).

6. Gebruiksaanwijzing

The work light offers three illumination levels for various needs.

1. Aan/uit: Locate the power button, typically on the back or side of the light housing. Press once to turn on the light.
2. Helderheid aanpassen: Subsequent presses of the power button will cycle through the brightness levels:
   • 25% helderheid: Approximately 400 lumens, providing up to 10 hours of illumination.
   • 50% helderheid: Approximately 800 lumens, providing up to 6 hours of illumination.
   • 100% helderheid: Approximately 1600 lumens, providing up to 3 hours of illumination.
3. Uitschakelen: After cycling through all brightness levels, pressing the button again will turn off the work light.

Figure 3: Icons illustrating the key features: 20W power, 1600 lumens output, rechargeable battery, and three dimming levels.

Figure 4: The work light in a typical workshop application, demonstrating its portability and utility.

7. De batterij opladen

The ANSMANN FL1600R is equipped with a rechargeable Lithium-ion battery.

1. Oplader aansluiten: Plug the provided power supply unit into the charging port on the work light. Then, connect the power supply to a suitable wall outlet.
2. Laadindicator: The work light typically has an indicator light that shows the charging status. Refer to the specific indicator behavior in the product's quick start guide if available.
3. Oplaadtijd: A full charge for the 32.6 Wh battery takes approximately 4 to 5 hours.
4. Operation During Charging: Als de lamp is switched on while charging, its brightness will be reduced to 50% to prioritize charging efficiency and prevent overheating.

8. Onderhoud

Goed onderhoud zorgt voor een lange levensduur en optimale prestaties van uw werklamp.

• Schoonmaak: Clean the exterior of the work light with a soft, damp Gebruik een doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen. Zorg ervoor dat de oplaadpoort vrij is van stof en vuil.
• Opslag: When not in use for extended periods, store the work light in a cool, dry place. It is recommended to charge the battery every 3-6 months to maintain its health.
• batterij zorg: The integrated Lithium-ion battery is not user-replaceable. Do not attempt to open the battery compartment.

9. Probleemoplossing

If you encounter issues with your ANSMANN FL1600R, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact ANSMANN customer support.

10. Technische specificaties

Figure 5: Key features of the work light, including 5000K daylight white, CRI > 80, temperature resistance, and IP54 rating.

Figure 6: EU Energy Label for the product, indicating an energy efficiency class of F. For more details, refer to the EPREL-database.

11. Garantie en ondersteuning

ANSMANN provides a 10 jaar fabrieksgarantie for this product, excluding the battery. The battery is subject to standard warranty terms for rechargeable batteries.

For warranty claims, technical support, or spare parts availability, please contact your retailer or ANSMANN customer service directly. Availability of spare parts is guaranteed for 1 year.

Houd uw modelnummer (1600-0275) en aankoopbewijs bij de hand wanneer u contact opneemt met de klantenservice.

12. Milieu-informatie

Do not dispose of the device or its battery with household waste. Electronic devices and batteries must be collected separately and recycled in an environmentally sound manner. Please use the return and collection systems available in your country for disposal.