KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

Invoering

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Voorkant view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

Afbeelding: Voorzijde view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Installatie en programmering

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Programmeerstappen:

  1. Open the driver's side door of your vehicle.
  2. Insert the key into the ignition and turn it to the ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. Druk op de bedieningsknop zeven keer. Op de eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the Slot button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. Laat de bedieningsknop los.
  7. Draai de contactsleutel naar de UIT plaatsen en verwijderen.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Video: Een korte samenvattingview of KeylessOption Key Fob Remotes for Viper systems.

Gebruiksaanwijzing

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

  • Vergrendelknop: Press to lock your vehicle's doors and arm the alarm system.
  • Ontgrendel knop: Press to unlock your vehicle's doors and disarm the alarm system.
  • AUX-knop: This button typically controls auxiliary functions, such as opening the trunk or activating a remote start feature, depending on your Viper system's configuration. Refer to your Viper system's manual for specific AUX button functionality.
  • Panic Button (*): Press and hold this button to activate the vehicle's panic alarm. Press again to deactivate.
Gehoekt view of the KeylessOption Key Fob, showing the side profile en knopindeling.

Afbeelding: Schuin view of the KeylessOption Key Fob, highlighting its ergonomic design.

Onderhoud

Batterij vervangen:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Scheid de twee helften van de afstandsbediening voorzichtig van elkaar.asing using a small flat-head screwdriver or a prying tool.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Insert the new battery with the correct orientation.
  4. Klik de afstandsbediening vast.asing weer stevig aan elkaar vast.
Rug view of the KeylessOption Key Fob, showing the smooth casing.

Afbeelding: Achterkant view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

Probleemoplossing

  • Afstandsbediening reageert niet: Ensure the battery is fresh and correctly installed. Re-attempt the programming steps carefully. Verify the FCC ID on your original remote matches EZSDEI7141.
  • Beperkt bereik: Replace the battery. Ensure there are no obstructions between the remote and the vehicle's antenna.
  • Vehicle not chirping during programming: Double-check that the ignition is in the ON position (not ACC or START). Confirm you are pressing the Viper control button the correct number of times and holding it on the last press until a chirp is heard.

Specificaties

MerkSleutelloze Optie
ModelnummerEZSDEI7141 474V
Compatibele apparatenViper Aftermarket Alarm System
FCC-IDEZSDEI7141
Aantal knoppen4 (Lock, Unlock, Aux, Panic)
Artikelgewicht0.634 ons
Pakket afmetingen6.77 x 4.65 x 0.47 inch

Garantie en ondersteuning

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webplaats.

KeylessOption garantiekaart

Image: KeylessOption Warranty Card, included with each purchase.

© 2025 KeylessOption. Alle rechten voorbehouden.

Gerelateerde documenten - EZSDEI7141 474V

Preview Programmeren van Toyota Prius-sleutelhangers: handleiding voor starten, contact en deurvergrendeling
Stapsgewijze instructies voor het programmeren van nieuwe sleutelhouders voor Toyota Prius-modellen, inclusief de functies van het contact en de deurvergrendeling. Leer hoe u uw sleutel zelf kunt programmeren.
Preview Continental Key Fob 6600079509 User Manual
User manual for the Continental Key Fob model 6600079509, detailing its operating modes including Transponder, Remote Keyless Entry (RKE), and Passive Keyless Entry (PASE), operating temperature ranges, and regulatory compliance information.
Preview APDTY-133775 Key Fob Programming Instructions | DIY Guide
Step-by-step instructions for programming the APDTY-133775 replacement key fob for your vehicle. This DIY guide ensures successful key fob setup.
Preview GWM AB30 Smart Key Gebruikershandleiding - Kostal
Uitgebreide gebruikershandleiding voor de Kostal GWM AB30 Smart Key (2AYARAB30). Productdetails overview, functies zoals Remote Keyless Entry (RKE), Passive Entry (PE), Passive Start (PS) en technische vereisten. Inclusief FCC-nalevingsinformatie.
Preview Continental Key Fob CG01 User Manual
User manual for the Continental CG01 key fob, covering operating modes, technical specifications, regulatory compliance, and safety warnings.
Preview Dorman 13798 Keyless Entry Remote Programming Guide
Comprehensive guide for programming Dorman 13798 keyless entry fobs for various vehicle models including Crown Victoria, Grand Marquis, Marauder, and Focus. Features step-by-step instructions for each application.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.