Fluid Audio FX50 5-inch Coaxial Studio Reference Monitor

Invoering

The Fluid Audio FX50 is a 5-inch single point source coaxial reference monitor, designed for professional audio production and critical listening environments. This bi-amplified monitor delivers 90 watts of power with a frequency response of 49Hz to 22kHz (+/-3db). Its unique coaxial driver design ensures a coherent soundstage and precise imaging, making it an ideal tool for mixing and mastering.

Belangrijkste kenmerken zijn:

• 5-inch Coaxial Studio Monitor
• Frequency response: 49Hz – 22KHz (+/- 3db)
• Crossover frequency: 2.9KHz
• Class D and DSP powered amplificatie
• Dual concentric "coaxial" driver for accurate sound reproduction

Product voorbijview

The FX50 monitor features a robust design with a front-loaded slot port for optimized bass output. The coaxial driver places the tweeter in the center of the woofer, creating a single point source for all frequencies, which enhances stereo imaging and depth of field.

Instellen

Proper setup is crucial for optimal performance of your FX50 monitors. Ensure the monitors are placed on a stable surface, ideally at ear level, and equidistant from your listening position to create an equilateral triangle. The rear panel offers various input and control options.

Verbindingen:

• XLR-ingang: Voor gebalanceerde audioaansluitingen van professionele audio-interfaces of mengpanelen.
• TRS-invoer: Voor gebalanceerde of ongebalanceerde 1/4-inch aansluitingen.
• RCA-ingang: For unbalanced audio connections from consumer-grade equipment.
• Stroomverbruik: Connect the provided power cable to a suitable AC outlet.

Ensure the monitor's power switch is in the 'Off' position before making any connections. Once all audio cables are securely connected, you can switch the monitor 'On'.

Bediening

The FX50 monitors provide several controls on the rear panel to tailor their sound to your listening environment.

Bediening:

• Volumeknop: Adjusts the overall output level of the monitor. Start with a low setting and gradually increase to a comfortable listening level.
• EQ Dip Switches: These switches allow for acoustic adjustments to compensate for room acoustics or personal preference. Refer to the labels on the rear panel for specific settings.
• HF Shelf (Switches 1-2): Adjusts high-frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
• Mid EQ (Switches 3-4): Adjusts mid-range frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
• Acoustic Space (Switches 5-6): Compensates for bass buildup when monitors are placed near walls or corners. Options typically include 0dB, -1dB, -2dB, -4dB.
• Low Freq Cutoff (Switches 7-8): Applies a high-pass filter to cut off low frequencies, useful when using a subwoofer. Options typically include Flat, 60Hz, 80Hz, 100Hz.
• Aan / uit schakelaar: Hiermee schakelt u de monitor in of uit.

Onderhoud

To ensure the longevity and optimal performance of your Fluid Audio FX50 monitors, follow these maintenance guidelines:

• Schoonmaak: Use a soft, dry cloth to clean the cabinet. Avoid abrasive cleaners, solvents, or waxes. Do not spray liquids directly onto the monitor.
• Plaatsing: Keep monitors away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the units.
• Behandeling: Handle with care. Avoid dropping or subjecting the monitors to strong impacts.
• Stroom: Disconnect the power cable from the wall outlet if the monitors will not be used for an extended period.

Probleemoplossing

If you encounter issues with your FX50 monitors, refer to the following common troubleshooting steps:

• Geen geluid:
• Check all power connections and ensure the monitor is switched on.
• Controleer of de audiokabels goed zijn aangesloten op zowel de monitor als de audiobron.
• Ensure the volume knob on the monitor and your audio source is turned up.
• Test met een andere audiobron of kabel om defecte apparatuur uit te sluiten.
• Sissend geluid:
• A slight hiss can be normal at high volume settings with no input. Reduce the monitor's volume if the hiss is excessive.
• Ensure you are using balanced cables (XLR or TRS) for longer runs to minimize interference.
• Check for ground loops by ensuring all audio equipment is plugged into the same power strip or outlet.
• Vervormd geluid:
• Lower the input level from your audio source or the monitor's volume.
• Controleer op beschadigde kabels.
• Ensure the EQ dip switches are not set to extreme values that might cause clipping.

Specificaties

Official Product Video (FX80 Series Overview)

Garantie en ondersteuning

The Fluid Audio FX50 monitor comes with a Limited Warranty. For detailed information regarding warranty terms, coverage, and how to obtain service, please refer to the warranty card included with your product or visit the official Fluid Audio webplaats.

Voor verdere hulp, technische ondersteuning of om view additional product resources, please visit the Fluid Audio Store on Amazon or the official Fluid Audio webplaats.