Invoering
This manual provides detailed instructions for the safe and proper installation and use of your PERLESMITH PSML1-E TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact PERLESMITH customer support.
Veiligheidsinformatie
WAARSCHUWING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding your warranty. Do not install this product on plasterboard, hollow walls, drywall, or soft walls. Only install on solid concrete walls, brick walls, or solid wood stud walls.
- Zorg ervoor dat het montageoppervlak het gecombineerde gewicht van de beugel en de televisie veilig kan dragen.
- Overschrijd het maximale draagvermogen van 52 kg (114 lbs) niet.
- Deze beugel is ontworpen voor tv's met een schermdiagonaal tussen 26 en 75 inch.
- Gebruik tijdens de installatie de juiste veiligheidsuitrusting, inclusief oogbescherming.
- Gebruik altijd een stud finder om de houten balken nauwkeurig te lokaliseren.
- Als u over een onderdeel van de installatie twijfelt, schakel dan professionele hulp in.
Image: Diagram highlighting the robust construction and 52kg weight capacity of the PERLESMITH TV mount, featuring secure dual hooks and a 3-layer solid steel plate.
Compatibiliteitscontrole
Before installation, verify the following:
- TV-formaat: Je tv moet tussen de 26 en 75 inch groot zijn.
- TV-gewicht: Je tv mag niet meer dan 52 kg wegen.
- VESA-patroon: Check the four mounting holes on the back of your TV. The VESA pattern (horizontal x vertical) must be within the range of 75x75 mm to 400x400 mm. Compatible VESA patterns include: 75x75, 100x100, 200x100, 200x200, 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400 mm.
- Muurtype: The mount is suitable for solid concrete walls, brick walls, or solid wood stud walls. Do NOT install on plasterboard, hollow walls, drywall, or soft walls.
Image: Diagram illustrating how to check TV VESA pattern, weight, size, and suitable wall types for installation.
Image: VESA compatibility diagram, illustrating the range of VESA patterns supported by the mount, from 75x75mm up to 400x400mm.
Inhoud van het pakket
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, contact PERLESMITH customer support.
Image: Main components of the PERLESMITH TV Wall Mount, showing the wall plate and the two vertical TV brackets.
Het pakket omvat doorgaans:
- Muurplaat
- TV-beugels (2 stuks)
- Diverse tv-schroeven (M4, M6, M8)
- Afstandhouders en ringen
- Wall Mounting Hardware (Lag bolts, concrete anchors)
- Level (for some kits)
- Gebruiksaanwijzing
Instellen en installeren
Follow these steps for a secure installation. A quick installation can be completed in approximately 15 minutes with proper tools and preparation.
Stap 1: Bevestig de tv-beugels aan de tv
- Leg uw tv voorzichtig met het scherm naar beneden op een zachte, schone ondergrond om krassen te voorkomen.
- Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use spacers if the TV back is uneven or if cables need clearance.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure the brackets are centered and securely tightened. The hooks on the brackets should face downwards.
Image: Step 1 of the installation process, showing the TV brackets being attached to the back of the television.
Stap 2: Wandplaat aan de muur bevestigen
- Determine the desired height for your TV. Mark the location for the wall plate on the wall.
- For wood stud installation: Use a stud finder to locate the center of the wood studs. Mark the drilling points. Drill pilot holes (recommended size specified in manual, typically 5.5mm/7/32"). Secure the wall plate using lag bolts and washers.
- For concrete/brick wall installation: Use the wall plate as a template to mark drilling points. Drill holes (recommended size specified in manual, typically 10mm/3/8"). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.
- Use a level to ensure the wall plate is perfectly horizontal before tightening all bolts.
Stap 3: Hang de tv aan de muurplaat
- Til de televisie voorzichtig met behulp van de bevestigde beugels op.
- Align the hooks on the TV brackets with the top edge of the wall plate. Gently lower the TV, ensuring the brackets engage securely with the wall plate.
- Engage the safety locks (if present) on the bottom of the TV brackets to prevent accidental dislodgement.
Image: A person completing the final step of hanging the TV onto the wall mount, illustrating the quick installation process.
Image: Detail of the safety lock mechanism, which secures the TV brackets to the wall plate.
Afbeelding: Close-up view of the anti-drop design, ensuring the TV remains securely attached to the mount.
Gebruiksaanwijzing
The PERLESMITH PSML1-E is a fixed TV wall mount. Once installed, the TV will remain in a static position, close to the wall (approximately 30 mm distance). This design provides a sleek, low-profile verschijning.
Image: A television mounted on the wall, demonstrating the minimal 30mm distance from the wall for a low-profile Look.
While the mount is fixed, some models may allow for a slight tilt adjustment up to 8 degrees. Refer to your specific product's features for tilt adjustment capabilities. To adjust, loosen the tilt bolts on the TV brackets, set the desired angle, and re-tighten the bolts securely.
Onderhoud
Regelmatig onderhoud zorgt voor een lange levensduur en veiligheid van uw tv-muurbeugel.
- Periodieke inspectie: Annually check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Schoonmaak: Veeg de houder af met een zachte, droge doek. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
- Schadecontrole: Inspect the mount for any signs of wear, corrosion, or damage. If damage is found, do not use the mount and contact customer support.
Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| De tv staat niet waterpas na installatie. | De muurplaat was tijdens de installatie niet waterpas. | Carefully remove the TV. Loosen the wall plate bolts, adjust with a level, and re-tighten. Re-hang the TV. |
| De TV past niet op de beugel. | Incorrect VESA pattern or TV size/weight. | Verify TV specifications against the mount's compatibility (VESA, size, weight). Ensure correct screws and spacers are used. |
| De berg voelt onstabiel aan. | Improper wall installation or loose fasteners. | Immediately remove the TV. Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure installation on a suitable wall type (solid concrete, brick, or wood stud). If unsure, consult a professional. |
| Cables are pinched or difficult to connect. | Insufficient space between TV and wall. | Ensure spacers are used if needed to provide adequate clearance for cables. Re-route cables carefully. |
Specificaties
- Model: PSML1-E
- Merk: PERLESMITH
- Materiaal: Gelegeerd staal
- Kleur: Zwart
- Installatietype: Muurbevestiging
- Bewegingstype: Vast
- Compatibele tv-formaten: 26 - 75 inch
- Maximale gewichtscapaciteit: 52 kg (114 lbs)
- VESA-compatibiliteit: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm
- Afstand vanaf muur: Ongeveer 30 mm
- Maximale kantelhoek: 8 Degrees (if applicable to specific unit)
- Artikelgewicht: 1.12 kilogram
- Pakket afmetingen: 43.7x11.3x4.9cm
- UPC-nummer: 713721601516
Garantie en ondersteuning
PERLESMITH products are designed for durability and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official PERLESMITH webwebsite. Bewaar uw aankoopbewijs als aankoopbewijs voor garantieclaims.
