Custom Dynamics PB-45-C Probeam LED Passing Lamps Gebruikershandleiding

1. Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Custom Dynamics PB-45-C 4.5in. Probeam LED Passing Lamps. These modern LED passing lamps are designed to enhance visibility and safety for your motorcycle.

2. Product voorbijview

The Custom Dynamics PB-45-C Probeam LED Passing Lamps feature a modern design with high lumen output for superior illumination. They are engineered for plug-and-play installation on most models.

Belangrijkste kenmerken:

• Modern LED passing lamp ontwerp
• 500 lumen output
• Plug-and-play-installatie
• Waterdichte constructie

Figure 2.1: Custom Dynamics PB-45-C Probeam LED Passing Lamps. deze lamps feature a sleek, round design with a chrome finish and clear lens, showcasing the internal LED components.

3. Veiligheidsinformatie

WAARSCHUWING: Dit product kan u blootstellen aan chemicaliën, waaronder lood, waarvan de staat Californië weet dat het kanker en geboorteafwijkingen of andere reproductieve schade veroorzaakt. Ga voor meer informatie naar www.P65Warnings.ca.gov.

Always ensure the vehicle's power is disconnected before installation. Consult a qualified technician if you are unsure about any installation steps. Wear appropriate safety gear during installation.

4. Installatie en installatie

The PB-45-C lamps are designed for plug-and-play installation. Follow these general steps for installation:

1. Ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts.
2. Carefully remove the existing passing lamps from your motorcycle, if applicable.
3. Connect the Custom Dynamics PB-45-C lamps to the motorcycle's wiring harness. For models manufactured before 2004, an adapter (part number 2001-1266) is required and sold separately.
4. Securely mount the new LED passing lamps in the designated locations.
5. Reconnect the battery and test the functionality of the new lamps.
6. Pas de l aanamp angle for optimal beam pattern and visibility.

For detailed vehicle-specific instructions, refer to your motorcycle's service manual.

5. Bediening

Once installed, the Probeam LED Passing Lamps operate in conjunction with your motorcycle's existing lighting system. They are designed to provide additional forward and side illumination, enhancing your visibility to other road users and improving your view van de weg.

• Turn on your motorcycle's ignition and headlight switch to activate the passing lamps.
• Zorg ervoor dat beide lamps illuminate correctly.
• Periodically check the alignment of the lamps to ensure they are providing optimal light distribution without blinding oncoming traffic.

6. Onderhoud

The Custom Dynamics PB-45-C LED Passing Lamps require minimal maintenance due to their durable LED technology and waterproof design.

• Schoonmaak: Maak de lens schoon met een zachte, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the lens or housing.
• Inspectie: Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure mounting hardware remains secure.
• Waterdichte afdichting: Do not attempt to open the sealed lamp housing, as this will compromise its waterproof integrity and void the warranty.

7. Probleemoplossing

8. Specificaties

9. Garantie en ondersteuning

For warranty information and technical support, please contact Custom Dynamics directly. Refer to their official website or the product packaging for the most current contact details and warranty policy.

Webwebsite: www.customdynamics.com