Einhell GE-LC 36/35 Li Solo Battery Chainsaw

1. Inleiding

This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.

Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.

2. Veiligheidsinstructies

Geef altijd prioriteit aan veiligheid bij het gebruik van elektrisch gereedschap. Het niet opvolgen van deze instructies kan leiden tot ernstig letsel of materiële schade.

2.1 Algemene veiligheid

• Draag persoonlijke beschermingsmiddelen (PBM): Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
• Werkgebied: Ensure the work area is clear of bystanders, children, and pets. Keep the area well-lit and free from obstacles.
• Weersomstandigheden: Do not use the chainsaw in rain or damp conditions. Avoid operating in strong winds.
• Batterijveiligheid: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.

2.2 Veiligheidsvoorschriften specifiek voor kettingzagen

• Terugslagpreventie: Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
• Kettingrem: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
• Juiste grip: Houd de kettingzaag altijd stevig vast met beide handen, met uw duimen en vingers om de handgrepen.
• Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.

Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.

3. Product voorbijview

The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.

3.1 Belangrijkste kenmerken

• Brushless Motor: For enhanced power and longer run time.
• Kickback Protection System: Automatically shuts off the saw upon chain lock.
• Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
• Tool-free Chain Tension Adjustment: For quick and easy adjustments.
• Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
• Metal Grip Claws: For secure handling and stability during cuts.
• Soft Grip Handle: For comfortable operation.

Afbeelding 3.1: Close-up view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.

Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.

4. Instellen

Voordat u uw kettingzaag in gebruik neemt, moet u ervoor zorgen dat deze correct is gemonteerd en voorbereid.

4.1 Uitpakken

Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.

4.2 Batterij installatie

The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.

1. Locate the battery compartments on the chainsaw.
2. Slide each charged battery into its respective compartment until it clicks securely into place.
3. To remove, press the release button on the battery and pull it out.

Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.

Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.

4.3 Chain and Bar Assembly & Tensioning

The chainsaw features tool-free chain tension adjustment.

1. Zorg ervoor dat de kettingrem is uitgeschakeld.
2. Loosen the side cover knob by turning it counter-clockwise.
3. Plaats de ketting om het tandwiel en de geleiderail en zorg ervoor dat de snijkanten in de juiste richting wijzen.
4. Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
5. Tighten the side cover knob slightly.
6. Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
7. Fully tighten the side cover knob.

Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.

4.4 Kettingolie bijvullen

The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.

1. Plaats de kettingzaag op een vlakke ondergrond.
2. Unscrew the oil tank cap (refer to Image 4.4).
3. Vul het reservoir met hoogwaardige ketting- en zaagbladolie. Gebruik geen afgewerkte olie of motorolie.
4. Plaats de dop veilig terug.

Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.

5. Gebruiksaanwijzing

Volg deze stappen voor een veilige en effectieve bediening van uw kettingzaag.

5.1 Starten en stoppen

1. Ensure batteries are installed and chain oil reservoir is full.
2. Disengage the chain brake by pulling the lever back towards the front handle.
3. Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
4. To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.

5.2 Snijtechnieken

• De snede plannen: Before cutting, assess the wood for stability, potential kickback, and pinch points.
• De selectie gehaald: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
• Het vellen van kleine bomen: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
• ledematen: Work from the bottom up, supporting the branch to prevent pinching.

Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.

6. Onderhoud

Regelmatig onderhoud zorgt voor optimale prestaties en verlengt de levensduur van uw kettingzaag.

6.1 Afstelling van de kettingspanning

Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.

Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.

6.2 Kettingsmering

The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.

Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.

6.3 Reiniging en opslag

• After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
• Bewaar de kettingzaag op een droge, veilige plaats, buiten bereik van kinderen.
• Gebruik altijd de beschermkap van de geleiderail bij het opbergen of vervoeren van de kettingzaag.

7. Probleemoplossing

In dit gedeelte worden veelvoorkomende problemen besproken waarmee u te maken kunt krijgen.

If problems persist, contact Einhell customer support or a qualified service technician.

8. Specificaties

Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.

9. Garantie en ondersteuning

For warranty information, product registration, or technical support, please refer to the official Einhell webwebsite of neem contact op met hun klantenservice. Bewaar uw aankoopbewijs als aankoopbewijs.

Voor verdere hulp kunt u terecht op de Einhell official webplaats.