Gebruikershandleiding voor de LevelOne FVT-2202 Fast Ethernet Media Converter

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of the LevelOne FVT-2202 Fast Ethernet Media Converter. The FVT-2202 is designed to convert 10/100Base-TX Fast Ethernet signals to 100Base-FX fiber optic signals, extending network reach over fiber optic cable. It supports both 10Mbps and 100Mbps network speeds, making it suitable for various network environments.

Lees deze handleiding aandachtig door voordat u het apparaat in gebruik neemt, om een ​​goede werking te garanderen en schade te voorkomen.

2. Inhoud van het pakket

Controleer of uw pakket de volgende items bevat:

• LevelOne FVT-2202 Fast Ethernet Media Converter
• Power Adapter (5VDC)
• Gebruikershandleiding (dit document)

Als er artikelen ontbreken of beschadigd zijn, neem dan onmiddellijk contact op met uw leverancier.

3. Fysieke beschrijving

The LevelOne FVT-2202 is a compact media converter designed for reliable performance. It features standard RJ45 and fiber optic (SC) ports, along with LED indicators for status monitoring.

Figuur 3.1: Voorkant view of the LevelOne FVT-2202 Media Converter, showing the RJ45 Ethernet port, SC fiber optic port, and LED indicators for TX, RX, Link/Act, and Power.

Figuur 3.2: Achterkant view of the LevelOne FVT-2202 Media Converter, highlighting the 5VDC power input and DIP switches for configuration.

3.1. LED-indicatoren

3.2. DIP-schakelaars

The FVT-2202 features DIP switches for advanced configuration. Refer to the markings on the device for specific switch functions, which typically include settings for LFP (Link Fault Pass-through), speed, and duplex mode.

• Schakelaar 1: LFP (Link Fault Pass-through) Enable/Disable
• Schakelaar 2: Auto-Negotiation Enable/Disable
• Schakelaar 3: 100Mbps/10Mbps Speed Selection (when Auto-Negotiation is disabled)
• Schakelaar 4: Full-Duplex/Half-Duplex Selection (when Auto-Negotiation is disabled)

Voorzichtigheid:

Ensure the device is powered off before changing DIP switch settings to prevent potential damage or incorrect configuration.

4. Installatie en installatie

Follow these steps to properly install and connect your LevelOne FVT-2202 Media Converter:

1. Bereid de omgeving voor: Ensure the installation location is clean, dry, and has adequate ventilation. Avoid areas with extreme temperatures or humidity.
2. Apparaten uitschakelen: Before making any connections, ensure that all network devices (switches, routers, computers) that will connect to the media converter are powered off.
3. Configure DIP Switches (if necessary): If specific network settings are required (e.g., fixed speed/duplex, LFP), adjust the DIP switches on the rear of the converter according to your network requirements. Refer to Section 3.2 for details.
4. Glasvezelkabel aansluiten: Connect one end of the fiber optic cable (SC connector) to the FX port on the FVT-2202. Connect the other end to your fiber optic network device (e.g., fiber switch, another media converter). Ensure the transmit (TX) and receive (RX) fibers are correctly matched.
5. Ethernetkabel aansluiten: Connect a standard RJ45 Ethernet cable from your copper-based network device (e.g., Ethernet switch, computer) to the TX port on the FVT-2202.
6. Sluit de voedingsadapter aan: Plug the provided 5VDC power adapter into the power input jack on the FVT-2202. Then, plug the power adapter into a suitable electrical outlet.
7. Apparaten inschakelen: Power on the FVT-2202. The PWR LED should illuminate green. Then, power on your connected network devices.
8. Controleer verbindingen: Check the Link/Act LEDs for both the FX (fiber) and TX (Ethernet) ports. A solid green light indicates a successful link. Blinking lights indicate data activity.

Belangrijk:

Always handle fiber optic cables with care. Avoid bending them sharply or exposing the connectors to dust and dirt, which can degrade performance.

5. Bediening

Once the LevelOne FVT-2202 is properly installed and powered on, it operates automatically as a transparent media converter. It translates Ethernet signals between copper and fiber optic mediums without requiring any software configuration.

5.1. Basisfunctionaliteit

• The converter transparently passes Ethernet frames between the RJ45 (copper) and SC (fiber) interfaces.
• It supports both 10Mbps and 100Mbps Fast Ethernet speeds.
• Auto-negotiation is typically enabled by default on the RJ45 port to automatically detect the speed and duplex mode of the connected device.
• The fiber optic port operates at 100Mbps full-duplex.

5.2. Monitoring Status

The LED indicators provide a quick visual status of the converter's operation:

• PWR-LED: Confirms the device is powered.
• FX Link/Act LED: Indicates the status of the fiber optic link and data activity.
• TX Link/Act LED: Indicates the status of the Ethernet link and data activity.

Refer to Section 3.1 for a detailed explanation of LED behaviors.

6. Onderhoud

The LevelOne FVT-2202 Media Converter is designed for minimal maintenance. However, following these guidelines can help ensure its longevity and reliable performance:

• Schoonmaak: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning the exterior. Do not use liquid or aerosol cleaners.
• Fiber Optic Connectors: Ensure fiber optic connectors are clean. Dust or dirt on the fiber end-faces can significantly degrade signal quality. Use appropriate fiber optic cleaning tools if necessary.
• Ventilatie: Zorg ervoor dat de ventilatieopeningen van het apparaat niet geblokkeerd zijn om oververhitting te voorkomen.
• Voeding: Use only the power adapter provided with the device. Using an incorrect power adapter can damage the converter.
• Omgevingsomstandigheden: Operate the device within its specified environmental conditions (temperature, humidity) to prevent malfunction.

7. Probleemoplossing

If you encounter issues with your LevelOne FVT-2202 Media Converter, refer to the following troubleshooting steps:

If the problem persists after trying these solutions, please contact LevelOne technical support for further assistance.

8. Specificaties

9. Garantie en ondersteuning

LevelOne products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official LevelOne webwebsite. Bewaar uw aankoopbewijs als bewijs van aankoop.

For technical support, product registration, or to download the latest drivers and firmware, please visit the LevelOne support portal or contact their customer service department. Contact information can typically be found on the LevelOne webwebsite: www.level1.com