1. Inleiding
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Algemene veiligheidsinstructies
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Veiligheid werkgebied: Houd de werkruimte schoon en goed verlicht. Rommelige of donkere ruimtes zijn een risico op ongelukken. Gebruik geen elektrisch gereedschap in explosieve atmosferen, zoals in de buurt van ontvlambare vloeistoffen, gassen of stof.
- Elektrische veiligheid: Vermijd lichaamscontact met geaarde oppervlakken zoals leidingen, radiatoren, fornuizen en koelkasten. Er is een verhoogd risico op een elektrische schok als uw lichaam geaard is.
- Persoonlijke veiligheid: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Gebruik en onderhoud van gereedschap: Forceer het elektrische gereedschap niet. Gebruik het juiste elektrische gereedschap voor uw toepassing. Het zal de klus beter en veiliger klaren met de snelheid waarvoor het is ontworpen. Koppel de accu los van het elektrische gereedschap voordat u aanpassingen uitvoert, accessoires verwisselt of het opbergt.
- Gebruik en onderhoud van de batterij: Laad alleen op met de door de fabrikant gespecificeerde oplader. Een oplader die geschikt is voor een bepaald type accu kan brandgevaar opleveren bij gebruik met een ander accupakket. Gebruik elektrisch gereedschap alleen met speciaal daarvoor bestemde accu's.
3. Product voorbijview en functies
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Hoog koppel: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Variabele snelheidsregeling: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- Geïntegreerde LED-verlichting: Three power LEDs provide optimal illumination of the work area.
- Ergonomisch ontwerp: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Duurzame constructie: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Riem clip: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Instellen
4.1 Batterij installeren (batterij en oplader worden apart verkocht)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- Om de batterij te verwijderen, drukt u op de ontgrendelingsknop(pen) aan de zijkant van het batterijpakket en schuift u het eruit.
4.2 Bit plaatsen en verwijderen
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Gebruiksaanwijzing
5.1 In-/uitschakelen en snelheidsregeling
- Beginnen: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Snelheidsaanpassing: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Stoppen: Laat de AAN/UIT-schakelaar los.
5.2 Rotatierichting
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Forward Rotation (Screwing In): Push the selector switch to the left.
- Reverse Rotation (Screwing Out): Push the selector switch to the right.
- Vergrendelingspositie: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Onderhoud
Regelmatig onderhoud zorgt ervoor dat uw slagschroevendraaier lang meegaat en optimaal presteert.
- Schoonmaak: Reinig de gereedschapsbehuizing na elk gebruik met een zachte, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Opslag: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Inspectie: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Probleemoplossing
| Probleem | Mogelijke oorzaak | Oplossing |
|---|---|---|
| Gereedschap start niet. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Verminderd vermogen of prestatie. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Het bitje zit niet stevig vast. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Specificaties
| Functie | Detail |
|---|---|
| Merk | Eenheid |
| Modelnummer | TE-CI 18/1 Li Solo (4510034) |
| Energiebron | Battery Powered (18V Power X-Change) |
| Maximale rotatiesnelheid | 2300 toeren per minuut |
| Maximaal koppel | 140 Newtonmeter |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| Deeltage | 18 Volt |
| Artikelgewicht | 1.18 kilogram (2.58 pond) |
| Productafmetingen | 7.8"L x 3.03"B x 6.65"H |
| Materiaal | Rubber, Aluminium |
| Meegeleverde componenten | Akku-Schlagschrauber (Impact Driver Body Only) |
| Batterijen inbegrepen? | Nee |
| Zijn batterijen nodig? | Yes (18V Lithium Ion) |
9. Garantie en ondersteuning
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webplaats.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.