somfy 1001814

Somfy LT50 506S2 Sonesse 6Nm 32rpm 120V Motor Instruction Manual

1. Inleiding

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Somfy LT50 506S2 Sonesse 6Nm 32rpm 120V motor. Please read these instructions carefully before proceeding with any installation or operation. Retain this manual for future reference.

2. Veiligheidsinformatie

  • Zorg ervoor dat alle elektrische aansluitingen worden uitgevoerd door een gekwalificeerde elektricien en voldoen aan de plaatselijke elektrische voorschriften.
  • Schakel de stroom uit voordat u onderhouds- of installatiewerkzaamheden uitvoert.
  • Do not allow children to operate the motor or controls.
  • Houd uw handen en losse kleding uit de buurt van bewegende onderdelen tijdens het gebruik.
  • This motor is designed for specific applications. Do not use it for purposes other than those specified by Somfy.

3. Product voorbijview

The Somfy LT50 506S2 Sonesse motor is a tubular motor designed for various applications requiring precise and quiet operation, such as motorized blinds, shades, or projection screens. It operates at 120V and provides 6Nm of torque at 32 RPM.

Somfy LT50 506S2 Sonesse Motor

Figuur 3.1: Algemeen view of the Somfy LT50 506S2 Sonesse Motor.

Motor end cap detail

Figure 3.2: Detail of the motor's end cap, showing the output shaft connection point.

Motor with drive and mounting components

Figure 3.3: The motor shown with typical drive and mounting components (accessories not included).

4. Installatie en installatie

Installation of the Somfy LT50 506S2 Sonesse motor requires careful attention to detail and adherence to electrical safety standards. It is recommended that installation be performed by a professional installer.

4.1 Components Required (Not Included)

Please note that essential accessories such as the crown, drive, and mounting plate are not included with the motor and must be acquired separately to complete the installation.

4.2 Elektrische aansluiting

The motor includes a power cord for connection to a 120V power supply. Ensure the power supply is disconnected before making any connections. Follow the wiring diagram provided with your specific application or consult a qualified electrician.

4.3 Montage

Mount the motor securely within its intended housing or bracket. Ensure the motor is level and properly aligned with the driven component (e.g., shade tube). Refer to the specific mounting instructions for your application.

4.4 Limietinstelling

After physical installation and electrical connection, the motor's upper and lower travel limits must be set. Consult the specific instructions for your control system (e.g., remote control, wall switch) to program these limits accurately.

5. Gebruiksaanwijzing

Once installed and limits are set, the motor can be operated using a compatible Somfy control device (e.g., remote, wall switch, smart home system). Refer to your control device's manual for specific operating procedures.

  • Omhoog/Open: Press the 'Up' or 'Open' button to raise the blind/shade or open the screen.
  • Omlaag/Sluiten: Press the 'Down' or 'Close' button to lower the blind/shade or close the screen.
  • Stop/My: Press the 'Stop' or 'My' button to halt the motor at any desired position. The 'My' button can also be programmed for a favorite intermediate position.

6. Onderhoud

The Somfy LT50 506S2 Sonesse motor is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.

  • Schoonmaak: Houd de motorruimte schoon en vrij van stof en vuil. Gebruik geen schurende reinigingsmiddelen of oplosmiddelen.
  • Inspectie: Periodically inspect the power cord for any signs of damage. Ensure all mounting hardware remains secure.
  • Smering: De motor is fabrieksmatig gesmeerd en heeft geen extra smering nodig.

7. Probleemoplossing

If you encounter issues with your motor, refer to the following common troubleshooting steps:

ProbleemMogelijke oorzaakOplossing
Motor reageert nietGeen stroomvoorziening
Faulty control device
Motoroverbelastingsbeveiliging geactiveerd
Controleer de stroomaansluiting en de stroomonderbreker
Test with another control device if available
Allow motor to cool down (if it has been running continuously)
Motor runs but blind/shade does not moveDrive or crown not properly engaged
Obstructie
Verify proper installation of drive and crown
Check for any physical obstructions
Motor stops prematurely or limits are incorrectLimits incorrectly setRefer to your control device manual to reset the motor limits

Als het probleem aanhoudt na het proberen van deze oplossingen, neem dan contact op met de klantenservice van Somfy of een gekwalificeerde technicus.

8. Specificaties

SpecificatieWaarde
Merksomfy
Modelnummer1001814
Snelheid32 toeren per minuut
Deeltage120 Volt
FabrikantZOOMFY
UPC685248788080
ASINB01N7NITLC
GTIN685248788080

9. Garantie-informatie

The Somfy LT50 506S2 Sonesse motor comes with a 5 jaar garantie. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Somfy webwebsite of neem contact op met de klantenservice.

10. Ondersteuning

For further assistance, technical support, or to inquire about accessories, please visit the official Somfy website or contact their customer service department. You can find contact information on the Somfy Store op Amazon of rechtstreeks op de website van de fabrikant webplaats.

© 2026 Somfy. Alle rechten voorbehouden.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.