Leviton GFSW1-W Smartlockpro GFCI Receptacle & Switch Instruction Manual

1. Inleiding

This manual provides essential information for the safe installation, operation, and maintenance of your Leviton GFSW1-W Smartlockpro Tamper-Resistant Combo GFCI Receptacle & Switch. This device combines a ground fault circuit interrupter (GFCI) receptacle with a standard switch, offering enhanced electrical safety and convenience in a single unit. Please read these instructions thoroughly before beginning installation or use.

2. Veiligheidsinformatie

WARNING: RISK OF ELECTRIC SHOCK OR FIRE. IMPROPER INSTALLATION OR USE MAY RESULT IN SERIOUS INJURY OR DEATH.

Always turn off power at the circuit breaker or fuse box before installing or servicing this device.
De installatie moet worden uitgevoerd door een gekwalificeerde elektricien in overeenstemming met alle nationale en lokale elektrische voorschriften.
Do not use this device with aluminum wiring. Use only with copper or copper-clad wire.
Zorg ervoor dat alle draadverbindingen goed vastzitten en goed geïsoleerd zijn.
This device is designed for indoor use in dry locations unless otherwise specified.

3. Producteigenschappen

Zelftestfunctie: Provides continuous ground fault protection by automatically testing the GFCI. It detects and trips on actual ground faults even during self-testing.
Initial Power-Up Test: Tests the GFCI within 3 seconds of initial power-up.
Auto-Monitoring: Exceeds UL requirements by adapting and shifting to more frequent testing if a potential problem is detected.
Protection Status Indicator: An LED light provides simple, intuitive feedback on power and protection status, including indication of line/load reversal.
Patented Bridge Contact: Ensures no power is delivered to the receptacle face if improperly wired (line-load reversed).
Enhanced Immunity: Improved immunity to high-frequency noise reduces nuisance tripping.
Surge Resistance: Advanced electronics provide superior resistance to electrical surges and over-voltagen.
Lockout Action: Patented lockout action prevents reset if the GFCI is damaged and cannot respond to a ground fault.
Tampzeer resistente houder: Designed to prevent insertion of foreign objects into the receptacle openings.
Duurzame constructie: Features an impact-resistant thermoplastic cover and polycarbonate body.

4. Specificaties

Attribuut	Waarde
Model	GFSW1-W
Deeltage	125 Volt
Amperage (Receptacle)	15 Amps
Schakelclassificatie	15 Amp - 120 VAC
NEMA-configuratie	5-15R
Kleur	Wit
Materiaal	Thermoplastic face, Polycarbonate body
Productafmetingen (L x B)	1.7"L x 1.13"B
Bedrijfstemperatuur	-35°C tot 66°C
Agency Standards	UL Standard 943 Class A (GFCI), UL 498 (Receptacles), CSA Certified, NOM Certified

5. Installatie (Setup)

BELANGRIJK: Turn OFF power at the circuit breaker or fuse box before wiring. Failure to do so may result in serious injury or death.

Bereid de bedrading voor: Carefully remove the existing device from the wall box. Identify the LINE (incoming power) and LOAD (downstream protection) wires. If you are unsure, consult a qualified electrician.
Sluit de draden aan:
- Connect the LINE hot wire to the brass LINE terminal.
- Connect the LINE neutral wire to the silver LINE terminal.
- If protecting downstream receptacles, connect the LOAD hot wire to the brass LOAD terminal.
- If protecting downstream receptacles, connect the LOAD neutral wire to the silver LOAD terminal.
- Connect the ground wire to the green ground screw.
- Zorg ervoor dat alle verbindingen stevig en veilig zijn.
Monteer het apparaat: Carefully fold the wires into the wall box. Mount the GFCI receptacle and switch into the wall box using the provided screws.
Wandplaat installeren: Attach the wallplate (not included) over the device.
Herstel de stroom: Turn ON power at the circuit breaker or fuse box.
Test de aardlekschakelaar: Perform the initial test as described in the "Operation" section to ensure proper functioning.

Leviton GFSW1-W Smartlockpro GFCI Receptacle and Switch installed in a white tiled wall.

Image: The Leviton GFSW1-W Smartlockpro GFCI Receptacle and Switch, white in color, shown installed on a white tiled wall. It features a rocker switch at the top, and below it, a GFCI receptacle with "RESET" and "TEST" buttons, and a small LED indicator light.

6. Bediening

The Leviton GFSW1-W combines a standard light switch with a GFCI-protected receptacle.

Schakelfunctie: The top rocker switch operates connected lighting or other loads. Press the top to turn ON, press the bottom to turn OFF.
GFCI Receptacle: The lower portion provides a 15 Amp, 125 Volt tamper-resistant outlet with ground fault protection.
Testing the GFCI:
1. Plug alamp or other device into the GFCI receptacle and turn it ON.
2. Press the "TEST" button. The GFCI should trip, and the lamp/device should turn OFF. The LED indicator may change color or turn off.
3. Press the "RESET" button. The GFCI should reset, and the lamp/device should turn ON. The LED indicator should return to its normal operating state (e.g., green).
4. If the GFCI does not trip or reset as described, it may be improperly wired or defective. Do not use and consult a qualified electrician.
De aardlekschakelaar resetten: If the GFCI trips (power is interrupted), press the "RESET" button firmly. If it does not reset, check for a ground fault or consult the troubleshooting section.

7. Onderhoud

Regular testing of your GFCI device is crucial to ensure continued protection against ground faults. Leviton recommends testing your GFCI monthly.

Follow the "Testing the GFCI" procedure outlined in the Operation section at least once a month.
If the GFCI fails to trip or reset during testing, it must be replaced immediately.
Keep the device and wallplate clean. Use a soft, damp Gebruik een doek om schoon te maken; vermijd schurende reinigingsmiddelen of oplosmiddelen.

8. Probleemoplossing

Probleem	Mogelijke oorzaak	Oplossing
De aardlekschakelaar kan niet worden gereset.	De aardlekschakelaar krijgt geen stroom. GFCI is improperly wired (LINE/LOAD reversed). A ground fault exists in the circuit or connected appliance. GFCI is defective.	Controleer de stroomonderbreker. Controleer de bedrading. Unplug all appliances and try to reset. If it resets, plug in appliances one by one to identify the faulty one. Replace the GFCI.
De aardlekschakelaar schakelt regelmatig uit.	A persistent ground fault. Overbelasting van het circuit. Moisture or damage to connected appliances/cords.	Inspect wiring and appliances for faults. Reduce the number of devices on the circuit. Inspect and replace damaged items.
Switch does not operate.	Geen stroom naar het apparaat. Incorrect wiring of the switch. Defecte schakelaar.	Controleer de stroomonderbreker. Verify switch wiring. Vervang het apparaat.

9. Garantie en ondersteuning

Limited Two-Year Product Warranty: Leviton warrants this product to be free from defects in material and workmanship under normal use and service for a period of two years from the date of original purchase. For complete warranty details, please refer to the documentation included with your product or visit the official Leviton webplaats.

Klantenservice: If you require assistance with installation, troubleshooting, or have questions about your Leviton GFSW1-W device, please contact Leviton Customer Service. Contact information can typically be found on the product packaging or the official Leviton website (www.leviton.com).

Leviton GFSW1-W